Used Klieverik Lamination Line Lfc141 / 3500 for sale (12,831)

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit Dwjdpfxozzyd No Ap Dsc * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints Dodpfxozzyd As Ap Dowc * Inline shear according to the above description

Condition: used, Year of construction: 2010, operating hours: 1,00,000 h, functionality: fully functional, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 50,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 65,000 mm, total width: 2,700 mm, power: 365 kW (496.26 HP), input frequency: 50 Hz, input current: 930 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, complete lacquering line: 2x Costa K7 sanders (2010, 1st- 2x roller / 2x pads, 2nd- 2x brushing, 1x pad ) 1x Heesemann sander (LSM8 2006.12.161) 2x Wikoma hot air drying tunnel (2002) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRIM+TN 3500/HT / 2lamps UV 2000 M2+CRIM+TN 3500/HT / 1lamp UV 2000 M1+CRIM+TN 3000/HT / 3lamps UV 2000 M3+CRIM+TN 4000/HT) 2x stain roller coaters ( Smartcoater M) 2x heavy putty roller coaters (Smartcoater SP1) 3x lacuer roller coaters (Smartcoater MF) Dwjdpfxjv Tbgyo Ap Djc 8x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 09075101981004, input voltage: 380 V, type of input current: three-phase, total length: 28,000 mm, year of last overhaul: 2024, control voltage: 380 V, workpiece height (max.): 160 mm, Equipment: double-sided, A woodworking company in Latvia is offering a complete Weinig GreCon Combipact finger jointing line for sale. The machine has had only two owners, both well-known companies in Latvia. We have operated the machine ourselves for the past 8 years. The reason for the sale is the recent purchase of new Weinig equipment. The machine is in full working order and is currently stored in a heated facility, ready for its next owner. The machine has only been operated in a single shift. The machine also has the option to produce finger joint connections for furniture. The machine can be inspected and demonstrated in operation at our facility. Regular maintenance and repairs have been carried out throughout its service life to ensure maximum productivity and profitability. Spare parts have been regularly sourced from the official Weinig dealer in Latvia. The machine is available for inspection and testing in Kuldīga, Latvia. All original Weinig manufacturer documentation is available. Some spare parts are also available for this machine. We are also selling a Weinig Dimter Opticut optimization line that was purchased together with this machine. Please see our separate advertisement for details. For further information, please contact us by phone or email, and I will provide all technical information. Additional images and videos can also be provided. Dwjdjz Armlepfx Ap Dsc

Condition: excellent (used), functionality: fully functional, Production lines for fruit and vegetable preserves. A significant portion of the equipment is newer – from 2011 and 2014 – supplemented by older, robust machines that have proven their reliability through years of continuous operation. The machines are sold as a complete line. Line capacity (based on an example product) – approximately 1200 liter jars/hour (~1.5 tons/hour). This translates to approximately 28,800 jars/day, or ~36 tons/day. (I) What can be produced on this line: - Compotes (jars, bottles) - Jams and thick preserves - Juices (bottle filling, tube pasteurization) - Canned goods (sterilization in an autoclave) - Pasteurized preserves in jars (pickles, vegetables, sauces) (II) Process flow: 1. Product dosing – into buckets, jars (2 dosing machines) 2. Filling – bottles (filling machine), cans (dosing machine + seamer) 3. Thermal processing – boiling tank, evaporators (juice/puree concentration), tube pasteurizer (liquid product before filling) 4. Packaging closing – sealers (bottles, jars), capping machine 5. Sterilization/pasteurization of finished packaging – autoclave (cans, jars), tunnel pasteurizers (3 units) 6. Labeling – labelers for bottles, jars and cartons 7. Collective packaging – heat tunnels (shrink film), conveyors (III) Equipment list: 1. Carton labeler 2. Heat tunnel (shrink film) 3. Conveyors 4. Heat tunnel 5. Bottle labeler 6. Jar/bottle labeler 7. Heat tunnel x 3 8. Labeler (without control panel) 9. Tunnel pasteurizer x2 10. Dosing machine for buckets 11. Dosing machine + seamer for cans 12. Pleszew Autoclave (2011) 13. Tunnel pasteurizer 14. Dosing machine 15. Capping machine 16. Seamer 17. Bottle filling machine 18. Jar seamer 19. Dosing machine for jars x2 20. Tube pasteurizer 21. Evaporator x3 22. Boiling tank Total value: 2,380,000 PLN = ~ 545,000 EUR (IV) Why buy the entire line: Dwedpfez Daatox Ap Dec Complete process line – from dosing to collective packaging – without the need to find missing components. Option for pickup with dismantling and transportation (to be agreed upon). Equipment used in production – documented history of use. Flexible sales options: entire line, separate technological units (e.g., canned goods section with autoclave, bottle filling section), or individual machines. Terms: Visit possible by prior arrangement. Transportation and dismantling to be agreed upon.

Condition: good (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – automatic bandsaw for tubes and profiles, year 2015 We offer for sale a fully automatic bandsaw, the BLM Group ADIGE-SYS EM 80, designed for efficient cutting of tubes and profiles in series production. The machine is equipped with Siemens SINUMERIK CNC control and an automatic material feeding system. This makes it suitable for repetitive production of larger series, with an emphasis on productivity and accuracy. Key technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Equipment and accessories: automatic material feeding system fully automatic working cycle multiple working / tool positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters supply and feeding section of the line Siemens SINUMERIK CNC control technical documentation in German complete electrical documentation The machine is particularly suitable for series production of shorter parts from tubes and profiles, where high repeatability, cutting accuracy and automated operation are important. Machine condition The current owner purchased the machine approximately two years ago for a planned production project, which was ultimately not realized. For this reason, the machine has not been used in regular production since its purchase. The seals of the hydraulic brake on the machine bed have been overhauled. Dedpfxjz Di Rnj Ap Djwc The offer also includes the accessories and set of clamping jaws shown in the photos. The machine can be inspected by prior arrangement.

Condition: new, PVC Line – YILMAZ TK 503 Single-Head Welding Machine + YILMAZ CA 601 Corner Cleaning Machine – Year 2023 The line consists of two professional machines designed for welding PVC profiles and subsequently cleaning the welded corners: YILMAZ TK 503 single-head welding machine YILMAZ CA 601 corner cleaning machine Together, these two machines make it possible to complete the PVC profile welding cycle and subsequently remove welding beads and processing residues from the welded corners. 1. YILMAZ TK 503 - Single-Head Welding Machine for PVC Single-head welding machine designed to join PVC profiles at continuously adjustable angles ranging from 30° to 180°. The machine allows the operator to select the welding bead thickness between the standard 2.0 mm configuration and the reduced 0.2 mm configuration. The melting and welding times, pressure and temperature can be adjusted according to the profile specifications. Main features Dodpfx Apez D Dhzj Djwc Continuously adjustable welding angle from 30° to 180° Standard 2.0 mm or reduced 0.2 mm welding bead Maximum profile height: 165 mm Automatic start and completion of the welding cycle Adjustable temperature from 0 to 300°C Separate profile clamping by foot pedal Quick mould-change system Support arms for long profiles Quick replacement of the Teflon coating Mobile machine frame Included accessories Profile support arms on both sides Electric foot pedal Technical specifications Installed power: 1.5 kW Power supply: 230 V AC, single-phase Frequency: 50/60 Hz Air consumption: 20 l/min Operating pressure: 6–8 bar Dimensions: 600 × 1,915 × 1,400 mm Net weight: 113 kg Gross weight: 128 kg 2. YILMAZ CA 601 - Corner Cleaning Machine for PVC Corner cleaning machine designed for finishing PVC profiles welded at 90°. The machine cleans the upper and lower surfaces and the external corners, accurately removing welding beads and residues generated during the welding process. The hydropneumatic system, PLC control and vertical and horizontal clamps ensure stability and precision throughout the working cycle. Main features Cleaning of PVC profiles welded at 90° Cleaning of upper and lower surfaces and external corners PLC control system Hydropneumatic operation Maximum profile dimensions: 130 × 180 mm Minimum profile dimensions: 30 × 30 mm Pneumatic blade-change system Profile clamping by vertical and horizontal clamps Profile centring system Adjustable cleaning tools for laminated and non-laminated profiles Single or multiple cleaning cycles Automatic cycle start and stop Included accessories Compressed-air gun Support table Two milling cutters for cleaning white profiles Technical specifications Installed power: 1.2 kW Power supply: 400 V AC, three-phase Frequency: 50/60 Hz Maximum cutter diameter: 215 mm Bore diameter: 32 mm Air consumption: 36 l/min Operating pressure: 6–8 bar Dimensions: 1,375 × 2,405 × 1,255 mm Net weight: 176 kg Gross weight: 210 kg

Condition: used, mileage: 1,18,839 km, power: 265 kW (360.30 HP), first registration: 10/2025, fuel type: diesel, number of seats: 41, gearing type: automatic, axle configuration: 4x2, empty load weight: 12,200 kg, maximum load weight: 5,600 kg, overall weight: 17,800 kg, emission class: euro6, color: violet, suspension: air, wheelbase: 6,030 mm, Year of construction: 2025, Equipment: ABS, air conditioning, bathroom, cruise control, parking heater, Color: Traffic purple RAL 4006, unladen weight: 12,200 kg, permissible total weight: 17,800 kg, 35 standing places, tire size: 275/70 R22.5, 1st axle: , 2nd axle: , air suspension, air conditioning in passenger compartment: TK Athenia S805 (32 kW) with heating function, digital destination display: Vianova 3-sided, auxiliary heater: 35 kW programmable with reinforced water pump, HVO compatible (Spheros), air conditioning in driver's area, stop request button, wheelchair space, stroller space, multi-function steering wheel, electronic stability program ESP, fog lights, raising/lowering, kneeling function, multi-function display, power steering: ZF 8098 steering system with integrated power steering, tire pressure monitoring system, rubber flooring: slip-resistant and abrasion-resistant, tinted glass, exterior mirrors electric and heated, digital tachograph, electronic braking system EBS, stop brake, roof hatch, retarder, twin tires, reversing camera: monitor (color display, 7 inches, in dashboard), sun visor: front windshield electric, adjustable manually on side window, toilet, speed limiter: 100 km/h, microphone for driver and tour guide, wheelchair ramp, blind spot assist, IVECO Bus Crossway LE 12m ADAS, engine Cursor 9 with an engine output of 265 kW/360 hp, 100 km/h automatic transmission Voith NXT 867.8 and retarder, 41 passenger seats, including 2 folding seats, up to 35 standing places, toilet, door 1 inward-swinging door 1000 mm single-leaf, door 2 outward-swinging door 1200 mm double-leaf, roof-mounted air conditioning system with heating function, auxiliary heater, WLAN, destination displays Vianova 3-sided, IBIS protocol, double USB connection for each row of seats installed on the side wall, video surveillance system. Dsdpfxez Ectxo Ap Dewc

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Adjustment of the lower alignment rollers is motorized. Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Maximum cutting speed: 20 m/min Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Weight, approximately 2,800 kg Dwsdpfjz Ei D Rex Ap Djc

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. Dodpfx Apod Supge Dswc PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: ready for operation (used), Year of construction: 2016, WEINIG OPTICUT S50 – OPTIMIZING SAWMILL For sale: a professional Weinig OptiCut S50 optimizing sawmill. The machine is from 2016 and is in perfect technical condition. It is currently connected and operational, allowing for a demonstration during operation. Machine specifications: • Model: Weinig OptiCut S50 • Year of manufacture: 2016 • Overall length: 11.30 m • Width: 1.40 m • Condition: excellent • Machine connected and ready for operation • Available from 10.10.2026 Dwedpfoz Du Hbjx Ap Doc The machine can be inspected and tested before purchase.

Condition: good (used), axle configuration: 1 axle, first registration: 01/2015, loading space length: 6,000 mm, loading space width: 2,230 mm, loading space height: 2,220 mm, total length: 6,450 mm, total width: 2,450 mm, total height: 3,150 mm, suspension: air, tire size: 205/65R17,5, wheelbase: 2,900 mm, color: other, Year of construction: 2015, Equipment: tail-lift, = Additional Options and Accessories = - Tail lift = Notes = Number of axles: 1, Payload: 2870 kg, Unladen weight: 2130 kg, Gross vehicle weight: 5000 kg, Chassis type: Complete chassis, Tail lift, Tail lift design: Rear door, Tail lift manufacturer: Anteo, Tail lift material: Steel and aluminum, Tail lift size: 230x160 Dwodpfx Ajzzwufep Doc = Further Information = General information Cab: Day cab License plate: ON-79-NT Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 2,130 kg Payload: 2,870 kg GVW: 5,000 kg Functional Tail lift: Anteo, Rear door Loading platform height: 90 cm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Dedpfjfv Au Aox Ap Dswc Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: new, 0 830 x 530 x 530 mm operating pressure 2,2 - 5,5 bar Air consumption 250 l/min. Dwsdpfx Apsupw Sge Dec weight of the machine ca. 50 Kg 0,95 x 0,65 x ,7 cm

Condition: new, 0 945 x 605 x 605 mm operating pressure 2,2 - 5,5 bar Dodpfx Apoupw Sme Dowc dimensions 1,0 x 0,61 x 1,65 m 1300 x 1000 x 750 cm Air consumption 250 l/min. weight of the machine ca. 0,09 t

Condition: ready for operation (used), Everything you need for an efficient packaging line! The packaging line consists of: 1) Case erector 2) Case sealer Dwsdpfxez Hirqo Ap Djc 3) Conveyor belt We have used it in our warehouse to pack orders. We purchased the machine from a factory where it was part of a similar line. It works exactly as it should. Contact us today.

Condition: new, Receiver capacity 80 l working pressure 4 - 8 bar Air consumption 250 - 800 l/min. weight of the machine ca. 36 Kg 1020 x 460 x 520 mm Mobile jet unit with extraction Consisting of: microfilter Boiler 80 liters Blasting gun with 2.5m supply hose Dsdpsf Nb Euofx Ap Dowc

Condition: refurbished (used), Year of construction: 2007, Description Technical Data Product number Dwodpfxez Alw Ro Ap Dsc VS 90 Year of manufacture 2007 Chamber size: 1120x1020x380 mm Sealing bar length: 2 x 920 mm Capacity for packaging: 1-3 / min Weight: 1,450 kg Power supply: 400V 5N Vacuum packaging line The Cryovac VS 90 automatic conveyor vacuum packaging machine is designed for packaging fresh meat, meat products, and cheese for further industrial processing. The machine has a simple and robust design. Designed with ergonomic safety and hygiene requirements in mind, the machine is easy to operate, clean, and maintain. Specification: Manufacturer: Cryovac Model: VS 90 Type: Vacuum packaging machine Dimensions: 1940 x 1180 x 2700 (mm) Power supply: 400V 50Hz 3N Power: 17.3 kW Belt width: 700 mm Material: Stainless steel, acid-resistant Machines after a major overhaul. The pumps achieve a vacuum of 0.3 mBar, as confirmed by a recorded video. The line includes: Cryovac VS 90 chamber packaging machine Cryovac ST 77 steam immersion shrink tunnel Busch WV 1000 internal booster pump Busch Ra 0160-1 external oil pump Busch Ra 0160-2 external oil pump Container for film scraps

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 08011887520 CR, overall weight: 700 kg, type of input current: AC, input voltage: 400 V, total length: 2,250 mm, total width: 1,280 mm, total height: 1,450 mm, stack height: 500 mm, compressed air connection: 8 bar, working width: 520 mm, temperature: 150 °C, power of vacuum pump: 9,000 W, Equipment: CE marking, FORMICA Foliant 520 from 2008, in very good condition and available for sale. The machine has been well maintained and carefully operated throughout its service life. It has only been used for a few hours per day on average, resulting in limited usage and a well-preserved overall condition. The FORMICA Foliant 520 is in very good working condition and is ready for continued professional production. Regular maintenance and careful operation have ensured reliable performance. Machine highlights: Manufacturer: FORMICA Model: Foliant 520 Year of manufacture: 2008 Very good overall condition Well maintained Limited daily operating hours Carefully operated Dodoz Hnkrjpfx Ap Dowc Ready for continued production Inspection possible by appointment The machine represents a good opportunity to acquire a well-maintained FORMICA Foliant 520 from 2008, suitable for professional production and ready for further use. Further technical specifications, photographs and additional information are available upon request.

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Djdpfx Apezivkbs Dswc Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Condition: excellent (used), Year of construction: 2003, 526 USED Industrial line for the production of rolls, Kaiser rolls, hamburgers, and hot dogs. EQUIPMENT: - KOENIG INDUSTRIE II divider-rounder - 6 rows - pre-proofer - bun marking station - final proofer TECHNICAL DATA: - year of production: 2003 - capacity 3000-12,000 rolls/h - weight 50-130 g - marking: 3 roll markings: Kaiser roll, Portuguese roll - final proofer equipped with temperature and humidity control EXTERNAL DIMENSIONS (in cm): LINE: - W: 180 cm - L: 900 cm - H: 376 cm FINAL PROOFER: - W: 340 cm - L: 460 cm - H: 380 cm The price is a net price. Dwodpfx Apjzwxr Rj Djc Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Second-hand machine Features and technical specifications: - double-sided in-line drilling machine - 2 drilling motors, 1.8 kW each, with oil brake cylinders - Stroke: max. 130 mm - with pneumatic changeover valve - 21 spindles, spindle pitch 32 mm - Drilling spacing: max. 640 mm (by moving the workpiece max. 2656 mm) - Gantry clearance 850 mm Dwjdpfx Ajzk Nrbsp Djc - Air consumption at 5 atü: approx. 11 l per cycle - Extraction connection 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: at short notice Storage location: 63934 Röllbach

Year of construction: 2005, condition: used, functionality: fully functional, For sale is a used, modular WENO assembly system/assembly line for automated or semi-automated manufacturing processes (pressing and screwing). The system is ideally suited for automotive suppliers, mechanical engineering, the electrical industry, and industrial assembly operations. Due to its modular design based on aluminum system profiles, the system can be flexibly adapted or converted for new production processes. CONTENTS & INTEGRATED HIGHLIGHTS: • Industrial screwing station from Atlas Copco & Lübbering: - Atlas Copco Power Focus 3009 Controller (PF3009-C-HW) - Atlas Copco Tensor DS7 / S4 operator terminal - Atlas Copco ETD DS7 electric screwdriver with balancer suspension Dodpfx Aszzp Ttsp Dewc - Lübbering flat-head gearhead for tight/difficult-to-access screw locations • Pneumatic pressing stations for joining and press-fitting operations • Pneumatic conveyor and transport system for workpiece guidance • Several ergonomic work and processing stations • Integrated control cabinet with Siemens LOGO! PLC control, Siemens SITOP 24V power supply, circuit breakers and safety relays TECHNICAL DATA: • Manufacturer: WENO Werkzeug & Maschinenbau GmbH (Viersen) • Year of construction: 2005 • Machine no.: 0197/02 • Order no.: 241992 • Electrical connection: 3 × 400 V / 50 Hz • Full load current: 32 A • Operating pressure: 6 bar • Total weight: approx. 3,500 kg • Wiring diagram no.: ELA 019702 • CE marking: Available CONDITION & SERVICE: • The system is in fully functional, well-maintained condition from ongoing operation. • An inspection is possible after prior appointment. • Disassembly, loading and transport can be arranged upon request. Upon request, transport and loading can be organized throughout Europe, for an additional charge. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: new, Year of construction: 2027, functionality: fully functional, TRANSFER TYPE POWDER COATING LINES The transfer type conveyor consists of a combination of conveyor rails. The effective powder coating system layout is designed by our project department according to your workshop dimensions based on the products to be coated and daily quantities. Workpieces are loaded onto the bars which are moved manually or automatically to bring the products to the needed, booth or oven. The advantage of this system is that the products are loaded on the conveyor and do not tire the operator as they move on the conveyor until the end of the process, so it is an efficient system. The movement of the bars can be automated at any point in the system, making the entire conveyor line a cost-effective alternative to power&free conveyors. In the painting system, automatic coating can be achieved by adding a conveyor system above the powder or paint booth and adding a reciprocator and automatic gun to the coating booth. We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations Dodpsvv H Uuefx Ap Dowc

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. Dwjdez Azx Ropfx Ap Dec The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.