Used Material Dryer for sale (18,213)

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) Fsdpfex R D Efox Aptjgg C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: good (used), Year of construction: 2016, 2x screw compressors, Kaeser, 10 bar, with integrated refrigerant dryer, compressed air tank, SIGMA AIR MANAGER 4.0 control system – used: Price per compressor, ex-works: €5,950 (net), dismantled, packaged, and loaded! Price for the compressed air tank, ex-works: €1,450 (net), dismantled, packaged, and loaded! SIGMA AIR MANAGER 4.0 main control system, price ex-works: €2,500 (net)! Price for the complete system (2x compressors, 1x compressed air tank, 1x SIGMA AIR MANAGER 4.0 control system) = only €13,500 (net)! Manufacturer: Kaeser Type: SK 25 T Fedpjzbyd Refx Aptegg Year of manufacture: 2016 Serial No.: 7201 Material No. SK.2 Operating hours: unknown, will be provided later Rated power: 15.0 kW Motor speed: 2,960 1/min Max. operating overpressure: 11.0 bar Dimensions (according to manufacturer's data sheet) W x D x H (mm) 750 x 1240 x 1260 Option K1 T2 C3 Option K1: Special coolant filling Option T2: Transformer / voltage adjustment Option C3: Connection of the control system (Sigma Control 2) to higher-level control or remote monitoring systems SIGMA AIR MANAGER 4.0 main control system: Control of compressed air stations – for optimum efficiency. Adaptive, efficient, and networked – with the SIGMA AIR MANAGER 4.0, demand-oriented compressed air management gets a new name. The compressed air management system controls the operation of several compressors as well as dryers or filters with unprecedented efficiency. Compressed air tank (data still to be verified) Kaeser, 1000L, max. operating pressure: 11 bar Condition: good Available: from Q4/2026 Location: Hamburg

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 332/18, Plastic regranulation line prepared for processing both film flakes and regrind. Machine capacity: 800–1200 kg, depending on the material. Equipment: 1. Forced feeder 2. 160/54D extruder with two independent degassing zones 3. Cutting system on head, model OR1000 4. Centrifugal dryer 5. Vibrating sieve 6. Additional plasticizing unit (screw + cylinder + feed hopper) Not included in the offer: 1. Automatic mesh filter GB1000 (equivalent to Britas ABMF1050-09) Fsdoy N T Uyjpfx Aptjgg

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material Fgjdpozylxijfx Aptsg 1 Tonne per Hour

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Fsdpoxwaikofx Aptjgg Corona treatment – during coating of film with water-based dispersions Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Due to a change in production, we are selling our almost new Fessmann smoking/cooking unit T3000, oil-heated Year of manufacture: 2022 Internal dimensions: 100 cm Chamber size: 198x104x102 Control system: FoodCon.2 Touch 12" Including cooling coil and cooling unit 3.3 kW Automatic pneumatic door opener Voltage: 400 V Front door hinge on the left Smoke inlet: top >> All technical details and description can be found in the attached document. The complete system package from 2022 consists of the following parts: >> including matching shredder/smoker: RR325 M suitable for beech/oak/fir wood >> including matching refrigeration dryer from Beko, model DPRA50 >> including matching refrigeration unit / outdoor installation, 3.3 kW The unit is available immediately. New price for the complete system including refrigeration unit, refrigeration dryer, and shredder/smoker: approx. €85,000. Dismantling and loading onto a forklift can be carried out by the seller. Organization of transport is the responsibility of the buyer. The unit is fully functional and in technically perfect condition. The unit can (currently) be inspected while in operation. ..... An official invoice with VAT will be issued. The price is quoted net plus VAT. Fgedpfx Asyycgyeptsg The sale is exclusively to entrepreneurs within the meaning of § 14 of the German Civil Code (BGB), excluding any liability for material defects. No guarantee is given. Sold as is.

Condition: used, Year of construction: 1990, functionality: fully functional, overall weight: 9,700 kg, COGEIM E.O. 2000 VACUUM PADDLE DRYER – PHARMACEUTICAL DESIGN – 2,380 L High-quality horizontal vacuum paddle dryer from COGEIM, Italy, in a pharmaceutical design. The dryer features a horizontal, heated/cooled stainless steel container with a large front-opening lid, as well as a robust paddle agitator with scrapers. The parts in contact with the product are made of stainless steel 1.4435, and the inner surfaces are highly polished. The system is suitable for demanding drying, mixing, and vacuum processes in the pharmaceutical, chemical, and fine chemical industries. TECHNICAL DATA Manufacturer: COGEIM, Italy Type: E.O. 2000 Year of manufacture: 1990 Project/Job No.: C.89/040 Working/Nominal volume: approx. 2,380 liters Total container volume: approx. 3,100 liters Container: Operating pressure: -1 / +6 bar Operating temperature: -20 / +165 °C Product-contact material: Stainless steel 1.4435 Inner surfaces: Highly polished HEATING/COOLING SYSTEM The container can be heated or cooled via an external half-pipe coil. Volume of heating/cooling chamber: approx. 150 liters Operating pressure of heating/cooling chamber: up to +6 bar Material of heating/cooling chamber: Stainless steel 1.4306 Temperature range: -20 / +165 °C AGITATOR Robust horizontal paddle agitator with scrapers Large-area mixing of the product Agitator shaft seal via mechanical seal Laterally arranged gearbox/motor drive EQUIPMENT / SCOPE OF SUPPLY The existing scope of supply includes, among other things: - Filter for solids / dust filter - Feed device - Discharge valve Fodpfsr Nclaox Aptsgg - Rotary valve - Compensator - Drive and gearbox - Pneumatic fittings and components - Large front-opening lid - Support frame - Existing connection components - Existing technical documentation - Original installation/connection drawing The large front lid provides very good access to the interior and to the agitator for inspection, cleaning, and maintenance. CONDITION Used system in operational condition. The interior and the paddle agitator appear to be in very good condition in the available images. Technical documentation and original drawings are available. Further technical information, detailed photos, and excerpts from documentation can be provided upon request.

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Fjdsy R Tdwopfx Aptogg

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 865 mm, area performance: 10,000 m²/h, total height: 900 mm, total width: 1,005 mm, total length: 1,796 mm, water tank capacity: 160 l, battery voltage: 24 V, noise level: 65 dB, battery capacity: 320 Ah, empty load weight: 838 kg, Ride-on Scrubber-Dryer Comac Optima 90S – Professional Cleaning Machine in Nearly New Condition. This machine was originally used as a demonstration model at trade fairs and events, which is why it has only 100 operating hours. It is in excellent condition and is fully operational. Technical Data and Features: - Model: Comac Optima 90S - Year of manufacture: 2021 - Operating hours: 100 h - Drive: Battery-powered (24 V) - Brush width: 2 x 450 mm (total approx. 900 mm working width) - Clean/dirty water tank: 160 liters - Cleaning performance: up to 10,000 m²/h - Brush pressure: up to 150 kg - Complete with battery, brushes, and battery charger Condition: The machine is in a very well-maintained, nearly new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was acquired in the context of an insolvency auction. It is an original Comac product. Fgedpoxw Rndofx Aptsg Country of manufacture: Italy Note: The technical information and descriptions are based on manufacturer data. All details are provided to the best of our knowledge, but no guarantee is given for completeness, accuracy, or specific properties. The machine is sold as described and inspected; warranty and liability for material defects are excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 Fjdpfx Ajzvc R Ujptogg MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Fgsdoxl Eltjpfx Aptog

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Fgedpfxowg Sgco Aptjg Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 133 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in near-new condition. The machine was originally used as a demonstration model at trade fairs and events and has therefore only 133 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 133 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 litres - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in very well-maintained, as-new condition. All functions have been tested – the device is ready for immediate use. Provenance: The unit was purchased as part of an insolvency auction. This is an original Comac product. Country of manufacture: Italy Fgsdpoxw Rmysfx Aptsg Note: The technical data and descriptions are based on manufacturer information. All details are provided to the best of our knowledge and belief, but without guarantee of completeness, correctness or specific characteristics. The unit is sold as described and inspected; warranty and liability for material defects are excluded. Subject to prior sale, typographical errors and mistakes.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 48 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in almost as-new condition. This machine was originally used as a demonstration unit at trade fairs and events, and therefore has only 48 operating hours. It is in excellent condition and fully functional. Technical Specifications and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) Fgodpexw Rkrsfx Apteg - Year of manufacture: 2018 - Operating hours: 48 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh water/waste water tank: 300 litres - Surface performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete with battery, brushes and charger Condition: The machine is in a very well-maintained, almost new condition. All functions have been tested – the unit is ready for immediate use. Origin: The unit was purchased at an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical details and descriptions are based on manufacturer information. All information is given to the best of our knowledge and belief, however, we do not guarantee completeness, accuracy, or specific characteristics. The device is sold as described and inspected; warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and omissions.

Condition: excellent (used), Year of construction: 1994, Dryer material Lanco Type: LT 50 Fgedpfeuvg I Rex Aptjg Year 1994

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-201-08-1422, functionality: fully functional, operating hours: 17,952 h, number of slots in tool magazine: 24, working width: 1,600 mm, spindle motor power: 15 W, number of spindles: 2, working length: 4,760 mm, Machining center with automatic material handling (serial number: 0-205-08-1424) TECHNICAL DETAILS Travel in X-axis: approx. 4,760 mm Travel in Y-axis: approx. 1,600 mm Main spindles: 2 Power of main spindles: 15 kW each Tool interface: HSK F63 Number of drilling heads: 2 Tool changer: 2 × 12-position MACHINE DETAILS Fgedpfx Aszx Anfoptsg Control system: PC85 / woodWOP Operating hours CNC: 17,952 h EQUIPMENT Automatic AP console tables Chip and waste disposal Safety enclosure Associated HOMAG handling and return conveyor system Portal handling Vacuum crossbar Conveyor technology C-axes FLEX-5 preparation Automatically positionable vacuum clamps Liquid ring vacuum pumps Note on machine designation: BOF 712/48/16/AP was the actual historical machine type. CENTATEQ E-500 is the later/current model designation, which is now visible on the machine.

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Fsdsyhd Dbopfx Aptegg Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: used, Year of construction: 2007, Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T The Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T is a shrinkable capsuling machine designed to optimize high-performance bottling lines. In fact, this model delivers an advanced technical solution, providing precise and reliable application of PVC shrinkable capsules on bottles of various sizes and types. This machine handles bottle formats with diameters ranging from Ø55 to 120 mm and heights from 220 to 360 mm. Fjdpfxsvxz Afs Aptjgg Main Technical Features Manufacturers produced the machine, model Monostadio Z9T, in 2007. It features a rotary multi-bell distributor with 9 heating heads. Consequently, this configuration ensures uniform heat distribution, which allows the capsules to shrink evenly and adhere perfectly to the bottle neck. Moreover, the multi-bell system optimizes capsule handling, minimizes downtime, and maintains continuous production without interruptions. Engineers designed the clockwise rotation to optimize the capsuling machine’s integration into existing bottling lines. In this way, it reduces the necessary plant modifications and enhances the overall flow of the production process. Production Performance of the used shrinkable capsuling machine The Used Shrinkable Capsuling Machine Robino & Galandrino Monostadio Z9T achieves a production capacity of 15,000 bph. Therefore, it proves ideal for companies that require high production volumes while ensuring precise capsule application. Capsule Types and Compatible Materials This capsuling machine supports the use of standard PVC shrinkable capsules and features an advanced distribution and shrinking system. The machine precisely positions the capsules onto the bottle neck through a rotary distribution mechanism, ensuring accurate placement before initiating the heat-shrinking process. The shrinkable material securely seals the closure and enhances the product’s aesthetic presentation. Furthermore, the machine includes a standard capsule storage system, which facilitates refilling and handling of consumables while minimizing downtime. Operational Advantages of the Robino & Galandrino machine  This used shrinkable capsuling machine offers operational reliability through its robust design and advanced heating technology. Indeed, the 9 heating heads allow precise temperature control, preventing overheating or uneven capsule shrinkage. Additionally, the rotary distribution system aligns the capsules perfectly on the bottle neck. Consequently, it reduces production waste and improves the line’s overall efficiency. This improvement is particularly important for large-scale operations, where even small efficiency enhancements can translate into significant cost savings. This machine also features a built-in dryer, which serves the crucial function of drying the bottle surface before the capsule application.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 1,451 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,245 mm, total width: 900 mm, total length: 1,796 mm, water tank capacity: 160 l, battery voltage: 24 V, noise level: 65 dB, battery capacity: 320 Ah, empty load weight: 815 kg, Ride-On Scrubber-Dryer Comac Optima 85B – Professional Cleaning Machine in Very Good Condition. Fgsdpfxsxw Rnks Aptjg The machine has been regularly used as a demonstration unit and, with 1,451 operating hours, is in very good and fully functional condition. Technical data and features: - Model: Comac Optima 85B - Year of manufacture: 2018 - Operating hours: 1,451 h - Drive: Battery-powered (24 V) - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 160 liters - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Incl. battery and charger (brushes not included) Condition: The machine is well-maintained and fully operational, with normal signs of use. All functions have been tested – the unit is ready for operation. Origin: The unit was acquired as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: Technical specifications and descriptions are based on manufacturer information. All details have been provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy, or specific features. The machine is sold as described and inspected, with warranty and liability for material defects excluded. Subject to prior sale, typographical errors, and mistakes.

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ hour.High quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Fodpfx Asx D A N Teptjgg Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: excellent (used), Year of construction: 2017, Koch Technik safety (protective) filter type SA3. Its main tasks are: -Vacuum pump protection: Protects blowers and suction pumps against the ingress of fine dust, plastic residues or impurities that could lead to engine failure or seizure -Material dust removal: Filters return air from feeders and material separators, ensuring the cleanliness of the entire pneumatic system. These devices are usually installed in transfer lines before the vacuum generator (pump), most often in granulate dryers (e.g. CKT series) or central raw material feeding systems for injection molding machines and extruders. 4 pieces available - years 2008, 2008, 2010 and 2017 Fgsdszkutdjpfx Aptsg Sold complete with 4 Koch pumps and controls

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 35 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near mint condition. This machine was originally used as a demonstration model at trade fairs and events and therefore only has 35 operating hours. It is in excellent condition. Technical Data and Features - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2019 - Total hours: 35 h Fsdpfx Apsxw Rmastsgg - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (total working width 850 mm) - Fresh/dirty water tank: 300 liters - Area coverage: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Incl. brushes - Battery and charger not included Condition: The machine is in a very well-maintained, like-new condition. Origin: The device was acquired as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical data and descriptions are based on manufacturer information. All details are given to the best of our knowledge and belief, but without guarantee of completeness, accuracy or any specific properties. The device is sold as described and inspected, with no warranty or liability for material defects. Subject to prior sale, typographical errors, and mistakes.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 1 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber-Dryer Comac C85 B NSC – professional cleaning machine in near-mint condition. This machine was originally used as a demonstration model at trade fairs and events and therefore has only 1 operating hour. It is in excellent condition. Technical data and features: - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 1 h - Drive: 36 V battery powered - Brush width: 2 x 430 mm (total 850 mm working width) - Fresh/dirty water tank: 300 liters - Area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling Fgjdpfsxw Rm Hjx Aptog - Includes brushes - Battery and charger not included Condition: The machine is in a very well-maintained, as-new condition. Origin: This unit was acquired as part of an insolvency auction. It is a genuine Comac product. Country of manufacture: Italy Note: All technical data and descriptions are based on manufacturer information. The details are provided to the best of our knowledge and belief, but without guarantee for completeness, accuracy or specific properties. The machine is sold as described and inspected, with warranty and liability for material defects excluded. Subject to prior sale, typing errors and mistakes.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Fsdpfey Iplfjx Aptegg Very little use Ex Pharma Facility

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2 h, functionality: fully functional, working width: 850 mm, area performance: 6,800 m²/h, total height: 1,630 mm, total width: 961 mm, total length: 1,917 mm, water tank capacity: 300 l, battery voltage: 36 V, noise level: 70 dB, Ride-on Scrubber Dryer Comac C85 B NSC – professional cleaning machine in near-new condition. This machine was originally used as a demonstration model at trade fairs and events and has only 1.5 operating hours. It is in top condition and fully functional. Technical Specifications and Equipment Fsdpfx Apoxw Rmtjtjgg - Model: Comac C85 B NSC (Non Stop Cleaning System) - Year of manufacture: 2020 - Operating hours: 1.5 h - Drive: 36 V battery-powered - Brush width: 2 x 430 mm (Total working width 850 mm) - Solution / recovery tank: 300 liters - Theoretical area performance: approx. 6,800 m²/h - Brush pressure: up to 150 kg - Non Stop Cleaning System with water recycling - Complete including battery, brushes, and charger Condition: The machine is in a very well maintained, almost new condition. All functions have been tested – the device is ready for immediate use. Origin: The device was purchased as part of an insolvency auction. This is a genuine Comac product. Country of manufacture: Italy Note: The technical specifications and descriptions are based on manufacturer information. All details provided to the best of our knowledge, but without guarantee for completeness, accuracy, or specific properties. The device is sold as described and inspected. Warranty or liability for material defects is excluded. Subject to prior sale, typographical errors, and mistakes.