Used Pierce Reacti-Therm 18840 for sale (1,023)

Condition: like new (used), UV-Vis spectrophotometer Thermo Scientific Nanodrop 8000. Used only once, the device with laptop and software is fully functional. Codpfx Apow Udq Ustehb

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, Cjdpfxezlccie Aptjhb magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: like new (used), Thermo Scientific metal detector Cjdofiud Eepfx Aptehb Model: Apex 500 Stainless frame, elevates from 300mm to 950mm, pneumatic blow reject with reject bin, 450mm x 160mm, belt dimensions 3300mm x 320mm, 3Ph, mobile

Year of construction: 2009, condition: used, functionality: fully functional, For sale is a Thermo Scientific iEMS Incubator/Shaker (Type 1410), ideal for ELISA applications and other microplate-based assays. Csdpfx Apszyahretshb Condition: Function-tested, heats and shakes flawlessly, incl. 9 original microplate holders. • Capacity: Up to 9 x 96-well microplates (3 levels with 3 slots each) • Temperature range: Programmable from 14 °C to 40 °C, controlled incubation range: ambient +3 °C to 40 °C (resolution 0.1 °C, accuracy ±0.3 °C) • Shaker: Orbital shaker with variable speed (400–1400 rpm in 250-step increments), programmable up to 48 hours • Dimensions: 400 x 400 x 450 mm • Weight: approx. 30 kg • Ideal for: ELISA, assays, diagnostic labs, research, routine lab work The unit was regularly serviced in laboratory operation, shows only minor signs of use, and is technically in very good condition. Shipping or pickup by arrangement; please inquire for international shipping. Feel free to get in touch with any interest or questions!

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity Chjdpfx Apoyxl Epjtjb -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Condition: ready for operation (used), Nabertherm N 120 / 85 HA Muffle furnace, convection chamber furnace, hardening furnace, furnace Chodozxn Azepfx Aptsb Max. temperature: 850 °C 13 kW Space requirement: 1400mm x 1000mm x 1500mm (W x D x H) Internal dimensions: 480mm x 710mm x 480mm (W x D x H) Diagonal: 950mm You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.

Year of construction: 2017, operating hours: 7,760 h, condition: used, functionality: fully functional, machine/vehicle number: 4012321, Please state your offer price. Sale only within Europe, including Turkey. Technical data as per attached handout. The machine is offered without packaging; any warranty or guarantee rights are excluded. Should you wish to dismantle the equipment yourself, please indicate this clearly in your offer. Csdpfxszkiz As Aptehb We do not guarantee the accuracy of the technical data, the completeness of tools and accessories, or compliance with all safety and environmental protection requirements as stated in accident prevention regulations.

Condition: new, Year of construction: 2026, total height: 3,000 mm, total length: 4,900 mm, total width: 2,400 mm, volume flow: 3.6 m³/h, type of input current: three-phase, power: 1.1 kW (1.50 HP), Equipment: cabin, Wet paint spray booth in cabin with extraction and supply air filter, lighting. Csdsrvi Riopfx Aptjhb

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Codpshzbq Tsfx Aptehb Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW Chsdpfx Aezvcknoptjb • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec. Chsdpfxjzlud Ej Apteb

Condition: good (used), Year of construction: 2007, machine/vehicle number: 194354, Offer 26187 Technical data: - Nominal temperature / Continuous temperature, stepless, up to 900 °C - Temperature control via NABERTHERM Controller C 40 - Heating from both sides, back wall, door, and floor - Motorized lift-up door - T. max. approx. 120 min - Drive: 400 V / 59 kW Cedpozw D H Hsfx Aptehb - Internal dimensions approx.: W 1000 x H 550 x D 1900 mm - Usable volume approx.: 950 L - Space required approx.: W 2100 x H 2800 x D 2800 mm - Weight approx.: 2900 kg

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. Chjdpfsxcbnrex Aptsb It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Condition: ready for operation (used), Year of construction: 1985, Used high-temperature chamber furnace - Tmax 1280°C - Volume 5000 liters - Internal dimensions: w x d x h 1250 x 1250 x 3200 mm - External dimensions: w x d x h 1600 x 2200 x 4000 mm - Weight 7000 kg - Rated power 198 kW - Documentation Inspection possible at any time by appointment. Furnace, furnaces, hardening furnace, annealing furnace, industrial furnace, chamber furnace, firing furnace, enameling furnace, tempering furnace, chamber furnace, chamber dryer. Chedpfjhwwltox Aptob

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, 12 months warranty, in-stock item, new unit -Model on wheels -Maximum temperature: 300 °C -Oven chamber volume: 1050 liters -External dimensions: 1470 x 970 x 1920 mm (W x D x H) -Oven chamber dimensions: 1200 x 670 x 1400 mm (W x D x H) -Controller B510 (5 programs, each with 4 steps), also available with C550 (10 programs, each with 20 segments) Chsdsiqkr Iepfx Aptsb -Horizontal, forced air circulation results in a temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with closed exhaust flap) -Permissible batch weight: 250 kg with distributed load -Load per grid shelf: 30 kg with distributed load -Reinforced floors and rails for 80 kg distributed load available upon request -Grid shelves included: 4 pcs -Maximum number of grid shelves: 14 pcs, available for short-term delivery -Connection power: max. 9.3 kW -Fan capacity: approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Weight: 450 kg -Documentation, CE declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg The oven is not to be used for materials containing solvents or for heating food, animals, wood, grain, etc. Oven, industrial oven, heating cabinet, heating oven, laboratory oven, drying oven, temperature oven, testing cabinet

Condition: used, Year of construction: 2012, functionality: fully functional, Fully refurbished, 12 months warranty -Unit on base frame -Maximum temperature: 1300 °C -Oven chamber volume: 120 liters -Oven chamber: 500 x 500 x 500 mm (W x D x H) Chedpfxoyn Emqs Apteb -Control cabinet separate -Eurotherm 3504 -Parallel swing door for opening in the hot state -Slot in the oven collar, bottom right (for retrofitting CO2 and N2 gas supply in a gas supply box, not included!) -Power: 15 kW -Connection: 400V 3/N/PE 50 Hz -Weight: 410 kg -Documentation, CE declaration Oven, furnaces, industrial oven, muffle furnace, heat treatment oven, chamber furnace

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle Cjdpezbr U Ujfx Aptshb -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a complete industrial RITTAL TopTherm switchgear cooling system, consisting of a central RITTAL chiller/cooling unit and a total of 16 RITTAL air/water heat exchangers. The system comes from an industrial production facility and was used for the central cooling of several switchgear cabinets. The entire system was in trouble-free operation until it was professionally dismantled. RITTAL Chiller / Cooling Unit Manufacturer: RITTAL GmbH & Co. KG Type: SK 3336.459 Design: KRAE0200TT00V480EF Year of manufacture: 2020 Date of manufacture: 07/15/2020 Serial number: 2020K000069533 Technical data: Nominal cooling capacity: 24,400 W / 24.4 kW Operating voltage: 3 × 400 V / 50 Hz Max. current: 22.3 A Starting current: 111.7 A Max. power consumption: 11,330 W Refrigerant: R410A Tank volume: 78 liters Temperature range: -20 to +43 °C Noise level: 76 dB(A) Protection class: IP44 Weight: 326 kg 16 RITTAL Air/Water Heat Exchangers The scope of delivery includes a total of: 10 × RITTAL TopTherm SK 3210.500 Air/Water Heat Exchanger Useful cooling capacity: 4.0 kW Operating voltage: 230 V Cooling medium: Water Protection class: IP55 6 × RITTAL TopTherm SK 3209.500 Air/Water Heat Exchanger Useful cooling capacity: 2.5 kW Operating voltage: 230 V Cjdpfxozwaa Aj Aptjhb Water flow rate: 400 l/h Cooling medium: Water Protection class: IP55 Weight: approx. 23.5 kg The heat exchangers were mounted on the respective switchgear cabinets and supplied with cooling water via the central RITTAL cooling unit. Scope of delivery: 1 × RITTAL TopTherm Chiller SK 3336.459, 24.4 kW 10 × RITTAL Air/Water Heat Exchanger SK 3210.500 6 × RITTAL Air/Water Heat Exchanger SK 3209.500 Existing cooling water pipes and hoses Existing connection fittings and connecting parts Other existing installation and connection accessories as shown in the pictures This offers a largely complete central switchgear cooling system with a total of 16 cooling points. The components come from a professionally installed industrial system, manufactured in 2020. The condition is used; minor optical signs of wear or damage to individual plastic covers can be seen in the pictures. Inspection is possible by appointment. The complete system is preferred for sale. Price: €14,900 net, negotiable Subject to prior sale and errors in the technical data. Technical data according to nameplates and available manufacturer documents.

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel Cjdpfxslc Dwvs Aptehb 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: used, Year of construction: 2007, Product Information "Annealing Furnace ThermConzept" Type/Model: WW 1000/06/A Condition: Used Year of Manufacture: 2007 Technical Data Maximum Temperature: 650 °C Internal Dimensions (W x D x H): 1000 mm x 1000 mm x 1000 mm External Dimensions (W x D x H): 2200 mm x 1800 mm x 3200 mm Volume: 1000 l Power: 47.0 kW Voltage: 400 3/N V Weight: 1900 kg Inquiry Item: Transportation costs will be provided in a separate, customized offer. Cedpfjzpynqex Aptohb

Condition: excellent (used), Saws and tools washing machine Rotatherm Cedjznm Tdepfx Aptehb

Condition: new, Year of construction: 2023, functionality: fully functional, We are offering this new thermofluid TTN120 + TTN200 pad printing machine, manufactured in 2023. Year of manufacture: 2023 We are selling 2 new pad printing machines + options: TTN200 pad printing machine, 2 colors Chjdpfozvpzmox Aptjb TTN200 pad printing machine, 1 color All details can be found in the purchase invoice shown in the photo. The equipment is brand new and has never been used, only for testing purposes. Purchase price in 2023 – the complete set, excluding VAT, is €18,800.00. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2015, machine/vehicle number: 15068203, operating pressure: 150 bar, type of input current: three-phase, input voltage: 400 V, fuel: liquefied natural gas (LNG), input current: 12 A, noise level: 77 dB, input frequency: 50 Hz, Two Thermat high-pressure cleaning units with control panel, pressure gauge and hose connections. Details: Brand: Thermat Model: HRG 800/150 Eco Number of units: 2 Fuel: natural gas Chedpfx Aezvf S Ieptjb Heating capacity: Bw 77.8 kW / ow 70 kW Electrical: 400V 3Ph N PE, AC 50Hz Nominal power: 4.2 kW Nominal current: 12 Amp. Max. operating pressure: 150 bar Working pressure: 150 bar (high-pressure), 30 bar (steam stage) Temperature: 90 °C (high-pressure), 105 °C (steam stage) Capacity: 13.3 l/min (high-pressure), 5 l/min (steam stage) Noise level: 77 dB(A) Machine number: 15068203 Product ID No.: CE0085AP0679 Year of construction: 2015 Contents: Various hoses/couplings 2 spray lances with handle Condition: Used

Year of construction: 2019, condition: ready for operation (used), There is a recirculating air cooling system consisting of an Alfa Laval plate heat exchanger and a Thermofin finned tube heat exchanger. 1) Alfa Laval M10-BW plate heat exchanger, year of manufacture: 2005, cooling capacity: 115kW, flow rate: 28.2m³/h, refrigerant NH3. 2) Finned tube heat exchanger Thermofin TBN, year of manufacture: 2019. Including panel housing and condensate drip tray. Documentation available. Chedpjt R Tr Sefx Aptjb

Year of construction: 2015, condition: ready for operation (used), A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible. Chsdpfexrf Iujx Aptob