Used Tajfun Gap 110 for sale (6,162)

Condition: used, Year of construction: 2025, Overview New complete filling and packaging line for beer and carbonated soft drinks in aluminium cans, with an output of 6,000 cans/h at 500 ml and 8,000 cans/h at 330 ml. The line runs from the depalletizer through can rinsing, filling and seaming, tunnel pasteurization, inspection and drying to sleeve labelling, tray shrink wrapping, ABB robot palletizing and pallet stretch wrapping. Two-floor layout: depalletizing on the upper floor, a clamping conveyor lowers the cans to the ground floor for all following machines. All machines are built by Ningbo Cixi except the ABB robot. Technical data - Year of manufacture: 2025 - Capacity: 6,000 cans/h at 500 ml Standard, 8,000 cans/h at 330 ml Standard - Can formats: 330 ml Standard (Ø 66 x 115.2 mm), 500 ml Standard (Ø 66 x 168 mm) - Lid size: 202 for all formats (plug Ø 52.40 mm) - Electrical supply: 380 V / 220 V, 50 Hz - Filler: compressed air and CO2 at 0.4 MPa - Pasteurizer heating: steam at 0.4 MPa, steam boiler not included Scope of Delivery - Depalletizer | XD400 | automatic tier sheet removal and empty pallet stacking, Siemens PLC and touch screen, 10,000 cans/h, 7.8 kW, approx. 8 x 4 x 3.3 m - Can lowering conveyor | JSJ-A | S-type clamping conveyor from the upper to the ground floor, fits both can formats - Can rinser | CX-1 | inline spray rinser, 2 sets of can cages, approx. 4,000 mm total length - Filler-seamer monoblock | AXW20-4Q | 20 filling valves, 4 seaming heads, automatic lubrication, change parts for Ø 66 mm cans, 7.5 kW, approx. 5,000 kg, 3,050 x 2,000 x 2,000 mm - Tunnel pasteurizer | BG-PLG | 8 temperature zones, 4 plate heat exchangers, 25 kW, 16,000 x 2,400 x 1,800 mm including heat exchangers and piping - Fill level inspection | YMXS-180G | inline - Leak inspection | inline internal pressure check - Can inverters | FGJ | 2 units - Air knife dryer | CG-1 | 24,000 cans/h, 7.5 kW fan - Can conveyors | magnetic chain conveyors, approx. 97 m up to the labeller with 13 drives and control cabinet, plus 22 m of belt conveyor from the labeller to the shrink wrapper - Sleeve labeller | SLM-150 | up to 9,000 cans/h, PM-1800 steam shrink tunnel with steam generator, mandrels for both can formats - Tray shrink wrapper | BT25 (TPM-250A) | film-only packs and tray with film, up to 25 packs/min, max. pack size 420 x 280 x 350 mm, approx. 3,000 kg - Robot palletizer | ABB | IRB 460 | 4-axis robot, 110 kg wrist load, 2.4 m reach, vacuum gripper for 6, 12 and 24 packs in both can formats - Pallet magazine | automatic, holds 8 to 10 empty pallets - Pallet conveyors | heavy-duty roller conveyors - Pallet stretch wrapper | automatic inline turntable wrapper, 2,000 mm turntable, loads up to 1,200 x 1,200 x 1,800 mm, 20 to 30 pallets/h, Siemens PLC and touch screen Condition New and unused, packed in export wooden cases. The photos show reference machines of the same models from the manufacturer's documentation. Kdedpoz Dv Uysfx Af Hjt Availability Immediately. Location: Serbia.

Condition: good (used), Year of construction: 2008, Used SCM Record 110 NT TVN Prisma Year of manufacture: 2008 (in operation since June 2009) 5-axis CNC machine Working area: 6110 x 1250 mm F18 drilling unit Rapid 24 tool changer Laser cross positioning aid UniClamps Kdedeztxzqjpfx Af Het Reinforced vacuum pump, 250 m3 Chip conveyor Machine is available immediately, disassembled and stored.

Condition: used, Year 1989 Center height on the bed: 225 - 250 mm Distance between centers: 1500 mm Maximum turning diameter in the gap: 660 - 710 mm Maximum turning diameter on the bed: 455 - 505 mm Maximum turning diameter on the carriage: 270 - 290 mm Fixed steady rest bore diameter: 200 mm Traveling steady rest bore diameter: 130 mm Bed width: 330 mm Gap width: 250 mm Gap width at the carriage: 160 mm Maximum spindle diameter: 140 mm Spindle bore: 105 mm Reduction sleeve for spindle / Morse taper: No. 5 Tailstock Morse taper: No. 5 Speeds and Feeds • Spindle speeds: No. 16 • Speed values: from 23 to 1000 rpm (or 35 to 1500 rpm). • Longitudinal feeds: 0.06 - 0.84 mm/rev. • Transverse feeds: 0.03 - 0.42 mm/rev. Threads • Metric pitches: 0.5 - 28 mm. • Module pitches: 0.25 - 14. • Whitworth: 2 - 112 threads/inch. Kedpfx Afez Dwl Ts Hsdt Motor • Standard power: 7.5 HP. Machine comes with operating and maintenance manual. All technical data provided is indicative and may be subject to change without prior notice; therefore, it should not be considered binding.

Condition: new, power: 55 kW (74.78 HP), Year of construction: 2026, A hammer crusher is a machine that uses high-speed rotating hammers to crush and break materials into smaller pieces. It is commonly used in various industries, including mining, cement, construction, metallurgy, and chemical processing. The basic principle of a hammer crusher involves a central rotor with hammers or blades that rotate and impact the material being crushed against a hard surface. Here are the key features and components of a typical hammer crusher: 1. Rotor: - The rotor is a central component of the hammer crusher. It usually consists of a shaft with multiple discs or hammers attached. Kedpsq I Nxdofx Af Hsdt - The rotor's rotation causes the hammers to swing outward, impacting the material. 2. Hammers: - Hammers are the striking or crushing elements attached to the rotor. They can be fixed or pivotally attached. - The material is crushed as the hammers impact it, generating kinetic energy. 3. Casing or Housing: - The casing or housing encloses the rotor and hammers, providing structural support and safety. - It also serves to contain the crushed material and direct it to the desired discharge point. 4. Grate Bars or Screens: - Positioned at the bottom of the crusher casing, grate bars or screens control the size of the crushed material by allowing smaller particles to pass through while keeping larger ones inside for further crushing. 5. Impact Plate: - Located near the bottom of the crusher, the impact plate absorbs the impact energy generated by the hammers and prevents excessive wear on the casing. 6. Drive System: - The hammer crusher is powered by a motor connected to the rotor through a drive belt or coupling. - The motor provides the necessary power to rotate the rotor, enabling the hammers to crush the material. 7. Adjustable Discharge: - Some hammer crushers feature an adjustable discharge, allowing users to control the size of the crushed material by adjusting the gap between the impact plate and the hammers. 8. Applications: - Hammer crushers are used for crushing a variety of materials, including coal, limestone, gypsum, aggregates, and various minerals. - They are commonly employed in the mining industry for primary and secondary crushing of ore. - In the cement industry, hammer crushers are used to crush limestone and other materials before they are mixed into the raw meal. 9. Maintenance and Safety: - Regular maintenance is essential to ensure the efficient operation of a hammer crusher. This includes checking and replacing worn hammers, inspecting the rotor, and lubricating moving parts. - Safety features, such as access doors and safety guards, are typically incorporated to prevent accidents during operation and maintenance. Technical Specifications (Typical MINGYUAN Series) Model Category,Max Feed Size,Capacity (t/h),Motor Power (kW),Rotor Speed (rpm) Small (PC-400), ≤100mm, 5 – 10, 11, "1,000" Medium (PC-800),≤200mm, 20 – 50, 55, 750 – 900 Heavy (PC-1200),≤350mm, 80 – 110, 132 – 160, 600 – 750 Heavy Hammer,"≤1,200mm", "500 – 1,000+ ","400 – 1,000" ,Variable

Year of construction: 2003, condition: good (used), This band saw, from our renowned brand SICA S.p.a., is currently stored at Plastima Used Machinery. The saw was manufactured in 2003 and is in used, but good condition. Brand: SICA S.p.A. Model: TRS/U 110-800 Year of construction: 2003 Power: 5.5 kW Kodpfszunwdsx Af Hsdt Maximum pipe outer diameter: 110 to 800 mm

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t Kdsdpez Duxwsfx Af Het

Condition: used, functionality: fully functional, Year of construction: 2022, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 320 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: centralized greasing system, cooling unit, We offer this used laser cutting machine with a rotary table, manufactured by Otinus, model VF1530-3000W, year of manufacture 2022. Machine name: Fiber laser cutting machine Model: VF1530-3000W Working area: 1500×3000 mm Laser power: 3000 W Serial number: 2022011503J Date of manufacture: 2022,1 Kdsdozzx Ruspfx Af Hjt If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), HERFRAGA SM-110 Automatic Packing Machine – Canning Industry The HERFRAGA SM-110 automatic packing machine is designed to automate the placement and packaging of products into containers within industrial processing and canning lines. Manufactured by HERFRAGA, a specialist in machinery for the canning industry, the SM-110 incorporates a continuous feeding and transport system that manages the product during the packaging operation, reducing manual handling and facilitating a regular flow to the subsequent production stages. Its industrial construction, primarily in stainless steel, allows it to be integrated into automatic processing and packaging lines. MAIN FEATURES -Manufacturer: HERFRAGA -Model: SM-110 -Type: Automatic packing machine -Application: packaging of products into containers -Automatic and continuous operation -Product feeding system -Controlled transport during the process -Guiding and positioning system -Integrated conveyor -Motorized drives -Construction primarily in stainless steel -Robust design for industrial use -Access to mechanisms for cleaning and maintenance -Designed for the canning industry -Integrable into existing production lines PROCESS The HERFRAGA SM-110 is designed to automate the packaging operation within a canning industrial line. The product is fed and transported in a controlled manner to the work area, where the machine's various mechanisms perform the placement and packaging operation into the container. Once this phase is completed, the containers can continue directly to subsequent operations such as filling with liquid, sealing, and heat treatment. It can be integrated with: -Product feeding systems -Container conveyors -Preparation and cutting equipment -Liquid, oil, or brine dosing systems -Can sealers -Container washers -Inspection systems -Autoclaves and sterilizers -Labeling machines -End-of-line equipment APPLICATIONS Kodpezxchrsfx Af Hjdt Particularly suitable for canning industries and food processing plants that need to automate the packaging and placement of products into containers. The HERFRAGA SM-110 can operate as a stand-alone unit within the process or be integrated into a complete automatic line for the production and packaging of canned goods, reducing manual operations and improving the continuity between the different production phases. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, CORMAK 460 × 1500 is a professional universal lathe designed for precision machining of metal components in industrial facilities, machine shops, and toolrooms. Featuring a rigid cast iron construction, a large spindle bore, and a 3-axis Digital Readout (DRO), this conventional lathe delivers outstanding stability, repeatability, and productivity for demanding machining applications. Key Features Heavy-duty cast iron bed, hardened and precision-ground, provides excellent vibration damping, rigidity, and long service life. Rigid cast iron base ensures exceptional machine stability and reliable accuracy, even under heavy cutting loads. 1,500 mm distance between centers allows machining of long workpieces in a single setup. 80 mm spindle bore accommodates large-diameter shafts, tubes, and bar stock. 3-axis Digital Readout (DRO) with optical scales provides accurate positioning and improved machining repeatability. 250 mm 3-jaw chuck offers secure workpiece clamping and fast setup. High-quality spindle bearings ensure smooth, stable operation across the full speed range. 5.5 kW (S1) main motor delivers reliable performance during continuous industrial operation. Rapid longitudinal and cross feeds increase productivity and reduce machining cycle times. Removable gap bed enables machining of workpieces up to 690 mm in diameter. Construction and Technology The CORMAK 460 × 1500 has been engineered for intensive industrial use. The large-bore spindle is supported by reinforced precision bearings, while power is transmitted through a multi-speed gearbox equipped with hardened and precision-ground gears, ensuring quiet operation, durability, and efficient torque transfer. Machine functions are controlled from an ergonomic operator panel, providing convenient access to spindle speeds, feeds, and threading functions. The robust construction guarantees long-term dimensional accuracy and reliable performance in demanding production environments. Technical Specifications Specification Value 3-jaw chuck 250 mm Swing over bed 460 mm Swing over cross slide 260 mm Swing over gap 690 mm Distance between centers 1500 mm Maximum workpiece length 1400 mm Bed width 300 mm Spindle bore 80 mm Number of spindle speeds 12 Spindle speed range 25–1700 RPM Individual spindle speeds 25, 40, 55, 75, 115, 170, 250, 375, 560, 750, 1100, 1700 RPM Spindle nose D1-8 Camlock Spindle taper MT7 Tool post dimensions 110 × 110 × 42 mm Maximum tool size 25 × 25 mm Top slide travel 125 mm Cross slide travel 295 mm Longitudinal carriage travel 1120 mm Metric threads 41 pitches, 0.1–14 mm Imperial threads 60 pitches, 2–112 TPI Module threads 34 pitches, 0.1–7 MP Diametral Pitch (DP) threads 50 pitches, 4–112 DP Longitudinal feed rates 42 feeds, 0.031–1.7 mm/rev Cross feed rates 42 feeds, 0.014–0.784 mm/rev Rapid traverse Yes Tailstock quill travel 130 mm Tailstock quill diameter 60 mm Tailstock taper MT4 Main motor (S1/S6) 5.5 / 6.6 kW, 400 V Coolant pump motor 0.1 kW Machine dimensions (L × W × H) 2700 × 1080 × 1650 mm Net weight 2125 kg Standard Equipment 3-axis Digital Readout (DRO) with optical scales Six vibration isolation mounts Fixed steady rest Follow rest MT4 dead center MT7/MT4 reduction sleeve Change gears Coolant system with pump LED work light Oil can and service tools Ksdpovzzqbefx Af Hodt CE-compliant safety guards User manual CE Declaration of Conformity

Condition: used, functionality: fully functional, input voltage: 380 V, cutting height (max.): 600 mm, cutting width (max.): 550 mm, control type: manual, actuation type: electric, total height: 2,600 mm, total length: 18,000 mm, total width: 3,500 mm, overall weight: 4,184 kg, Equipment: documentation/manual, motor brake, For sale: JAROMA DRCC-110 vertical wide-band sawmill. This is a saw with a feed carriage, log manipulation system, longitudinal feeder, and log infeed device. Designed for longitudinal cutting of logs into boards and squared timber. Saw wheel diameter: 1100 mm. Cutting speed: 38 m/s. Carriage working speed: 1–40 m/min. Bandsaw width: 130 mm. Very well-suited for cutting curved logs. Includes a cross-feed conveyor for the log storage area. Kedpfoyqx Uysx Af Hsdt

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 10,362 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,050 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,100 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 16 x 6 -8, overall weight: 3,288 kg, total height: 2,050 mm, total length: 2,100 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 316 K 110-310 ZZ – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.100 mm Closed height: 2.050 mm Free lift: 1.400 mm Mast: Duplex (2F310) Fork length: 1.100 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah v. 2016 Charger: Dreiphasig 48 V 100 A Tyres: Superelastik SE 18 x 7 - 8 (70%) / 16 x 6 -8 (70%) Service weight: 3.288 kg Length: 2.100 mm Width: 1.070 mm Year of manufacture: 2017 Kdsdpfxez Aprxj Af Het Operating hours: 10.362 h Condition: ready to drive EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308624 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Well-maintained, used plate shear from LVD. Type CS 3100 / 6 Capacity: 3100 x 6 mm Electrically adjustable back gauge and cutting angle Kodpfx Ajz Dwtqof Hedt Manually adjustable shear gap Rear safety guard

Condition: used, mileage: 1,53,000 km, power: 235 kW (319.51 HP), first registration: 12/2023, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Isuzu Citiport 18 articulated bus with 45 seats & 110 standing places - air conditioning - ZF EcoLife automatic transmission - matrix display system - Kdodjzwi Ivepfx Af Hjt * Diesel - 8,900 cc³ - 269 kW - 366 hp - Euro 6 - green environmental badge - new TÜV inspection - from first owner - * 45 seats + 1 driver + 1 wheelchair space with manual wheelchair ramp - 110 standing places * Auxiliary heater / radio / ABS / ASR - 3 x double-width doors - LAWO LED matrix display system - * Vehicles are equipped with ZF Ecolife transmissions and the large TECTOR engine * Vehicles are in their original white color and currently wrapped in pink for rail replacement service * Vehicle dimensions: Length: 18,200 mm x Width: 2,550 mm x Height: 3,136 mm * German vehicles - German vehicle registration documents - price is per vehicle - * Errors / printing errors & prior sale reserved - vehicles available immediately - * Please make an appointment for viewing & test drive * Contact person: Andreas Vogel * ATTENTION - Vehicles are stored outside - Please inquire about the exact location - ATTENTION -

Condition: used, Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 87 mm, turning diameter: 380 mm, turning length: 1,000 mm, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, travel distance X-axis: 190 mm, travel distance Z-axis: 1,090 mm, VICTOR VTURN-26 / 110 – LIVE TOOLING Kdodezvfrujpfx Af Hot - Manufacturer: Victor - Model: Vturn-26 / 110 - Year: 1998 - Machine Type: CNC Turning Center with Live Tooling - Number of Axes: 3 (X / Z / C) - C-Axis: Included - Live Tooling: 8 Driven Tools - Bar Feeder: Included - X-Axis Travel: Approx. 190 mm - Z-Axis Travel: Approx. 1,090 mm - Maximum Turning Length: Approx. 1,000–1,100 mm - Swing Over Bed: Approx. 520 mm - Maximum Turning Diameter: Approx. 380 mm - Spindle Speed: Up to 3,500 rpm - Spindle Nose: A2-8 - Bar Capacity: Approx. 75 mm - Spindle Bore: Approx. 87 mm - Spindle Motor Power: Approx. 18.5 kW - Turret: Live Tool Turret - Machine Dimensions: Approx. 4,400 × 1,700 × 1,900 mm - Machine Weight: Approx. 6,000 kg - Bar Feeder: Included

Condition: excellent (used), Year of construction: 2016, Ref: 11131 . 2016 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 196,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) Kodpfozq D Iqjx Af Hsdt * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour

Condition: good (used), functionality: fully functional, For Sale: Takisawa EX-110 CNC Lathe + LNS Bar Feeder, Year 2004 A Japanese-made Takisawa EX-110 CNC lathe in good condition, equipped with an LNS bar feeder. Specifications: - Control: Fanuc 21i-TB - Max turning diameter: 400 mm - Max swing over bed: 495 mm - Max turning length: 710 mm Ksdoyrgggepfx Af Hjdt - Bar capacity: 75 mm - Spindle speed: 30–3,500 rpm - Spindle power: 18.5 kW - Turret positions: 12 - Chuck size: 250 mm (A2-8") - Rapid traverse X/Z: 16/20 m/min - Weight: approx. 5,000 kg Included equipment: LNS bar feeder, tailstock, chip conveyor, tool setter, coolant system. Further information and pricing upon request. 📞

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. Kdedsy Tnzcepfx Af Hjt The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12 276 / REV 13 976, power: 30 kW (40.79 HP), overpressure (max.): 0.5 bar, tank capacity: 110 l, No minimum price – guaranteed sale to the highest bidder! The distillation unit underwent an overhaul in 2024. TECHNICAL DETAILS Capacity: 110 l Water jacket volume: 180 l Operating overpressure: 0.5 bar Heating method: Electric heating elements MACHINE DETAILS Machine type: Column still with water jacket Power: 30 kW Kdjdpfxezzmk Ae Af Hjt

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 87, functionality: fully functional, EBERL vacuum dryer, manufactured in 2004. Underwent a major overhaul in 2024, performed by Eberl (purchased directly from Eberl). Kdsdsy Uc I Hopfx Af Het Fully operational, complete documentation available.

Condition: good (used), functionality: fully functional, mileage: 1,62,000 km, maximum load weight: 8,000 kg, Year of construction: 2009, operating hours: 15,200 h, Manufacturer: Liebherr Type: MK 110 Year: 2009 Capacity (t): 8 t Main boom: 52.00 m Kilometers: 162,000 km Crane hours: 15,200 h Undercarriage hours: 6,700 h Max. lifting height: 33 m Drive: 10 x 8 x 10 Kodpsz Ar Ddsfx Af Hedt

Condition: used, Year of construction: 1990, machine/vehicle number: 356.8.300, Single capping head; Working direction: left-right; Kodpfx Afjzz Rnfo Hodt Without cork orientator.

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/110 Tech / production line with robot Engel ER-HLI 41 and conveyor belt / machine in very good technical condition Year of manufacture: 2004 Injection unit: Screw diameter: 40 mm injection weight: 190 g Injection pressure: 1670 bar Metering volume: 201 ccm Clamping unit: clamping force: 110 t tie bar distance: 0x0 mm size of clamping platens: 790x680 mm ejector: hydraulic clamping unit: hydraulic Control system: CC 100 Additional equipment: Production line with integrated robot Engel ER-HLI 41 and conveyor belt. Tie-bar-less machine Hydraulic core puller x 1 Injection unit hardened - bimetal Machine serviced by authorized service Engel Machine with original protective housing to the robot and conveyor belt Dimensions: Weight: 7400 kg Length/width/height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating power: 9,2 kW Total power: 27,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request Kdjdpfx Aezy Iqbsf Hjt

Condition: repair required (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: 101121, travel distance X-axis: 230 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, spindle nose: BT40, number of spindles: 3, number of slots in tool magazine: 72, tool length: 220 mm, input voltage: 380 V, type of input current: three-phase, PORTACENTER is a 3-spindle CNC machining center designed for high-precision operations such as milling and drilling steel, brass, cast iron, aluminum, and more. The machine we are offering is no longer capable of producing reliably. Our Italian subcontractor offers a complete retrofit of this machine for €300,000. Today, a new equivalent machine costs around €800,000. Kdsdpfxjxg Rxne Af Hst

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition Kjdpfxewiq D Es Af Hodt • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: like new (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 45 mm, Engel Victory 500/110 Tech Horizontal injection moulding machine with 110 tons clamping force, brand Engel, model Victory 500/110 Tech. Year of manufacture: 2004. Approx. 69,000 automatic operating hours. Includes a fully equipped production cell: ENGEL ERC 43/1-EA Robot (2004), conveyor belt, and safety fencing. The injection moulding machine is delivered RE-conditioned by our expert technical team and in optimal working condition. We can offer our customers on-site commissioning service, ensuring proper machine operation upon installation completion. Technical Details: Kdjdpfx Afjw Hbiaj Het Screw diameter: 45 mm Year of manufacture: 2004 Operating hours: 69,000 Opening stroke: 507 mm Injection volume: 318 cm³ Injection pressure: 1016/(1603 increased) bar Maximum distance between platens: 800 mm Minimum/Maximum mould thickness: 300 mm (min) / 500 mm (max) Platen dimensions: 740x680 mm