Used Crossbeam for sale (215)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Lrsdpfx Abozaz Tkjyjn Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Based on the tried-and-tested HANGLER welded construction using high-quality steel with forward-tapering welded longitudinal beams. Frame neck with double center web. Z-profile crossbeams punched through the longitudinal beam with welded special side frame. Replaceable 2" kingpin, beveled forward with a grinding plate, made of high-quality steel sheet. 18 pairs of lashing rings embedded in the outer frame, each with a capacity of 2.5 tons, 8 pairs of folding lashing rings embedded in the outer frame, each with a capacity of 5 tons, 24 tons. 2-speed support winch, single-side operation, with straight lower part, 2 support wedges with holder, aluminum side impact protection, plastic fenders in front of and behind each axle, with anti-spray flaps behind each axle, underrun protection at the rear, spray flaps at the rear over the entire width, coil trough approximately 8,000 mm long with cover, approximately 40 mm, divided by angled loading beams. Stanchion sockets and supports suitable for FR 80/80/4, completely hot-dip galvanized. Plug-in stanchions 80/80 including lower reinforcement, hydraulic angled loading device with 4 crossbeams: hydraulic supply via tractor unit using a 2-line pump system (supply and return) with a 2-way quick-release coupling. Angled loading beams with integrated extendable sections that can be locked in height. Hydraulic cylinders multi-stage, each beam with a universal joint suspension. Including supports - adjustable - with pin securing. Cylinder passages with strip brush seals on both sides, to protect against weathering and cleaning of the piston rods. 5-way control block for operating the angled loading device as well as for the folding device. Sliding tarpaulin, including tarpaulin rail cover, 1 set of coil floor holder with height-adjustable support bolts for various coil floor diameters, including storage. 1 piece of impact protection for angled plate - for securing at the front, BPW or SAF disc brake axles, at the manufacturer's choice, offset axle spacing 1310/1450 mm, air suspension, 2-line compressed air brake system, aluminum compressed air tank, spring brake parking brake, axle load recognition via EBS-CAN bus signal, for display on the display in the cab, the truck must be correspondingly pre-equipped, "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the tractor unit, via EBS, 435/50 R 19.5", manufacturer's choice, 24 volts, multi-chamber lights, yellow LED lighting on the side, yellow LED lighting on the side coupled with the turn signal "flashing side marker lights", 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, additional 7-pole socket (according to ISO 1724) in the underrun protection at the rear, pair of warning signs double LED illuminated and extendable to 3,000 mm, removable with a plug, LED beacon with holder, switched via parking lights, sieve-printed panels approximately 30 mm thick, flush-mounted with the side frame! Front wall made of aluminum hollow profiles, fixed height approximately 2,400 mm, with wooden slats above it. Inside reinforced with 3 mm aluminum sheet, approximately 630 mm high from the floor as a baseboard. 2 front VOLUMEN corner posts, permanently mounted, approximately 2,400 mm high, 3 pairs of Kinnegrip center posts, approximately 600 mm high with Kinnetop at approximately 2,000 mm, 1 pair of plug-in rear corner posts including reinforcement inside up to the 1st slat row, aluminum hollow profile, approximately 600 mm Ledpfei Riw Hjx Abyjrn

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT34202034509, empty load weight: 4,790 kg, maximum load weight: 33,210 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: red, 3-Axle Container Gooseneck Semi-Trailer Type SDS 420 Rigid 40" Chassis: Semi-trailer chassis Fine-grained steel welded construction, kingpin plate with interchangeable 2" kingpin and 2 kingpin positions Container receptacles: 1 x 20 ft in the center, without steel/diamond plate flooring in the rear area 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Front crossbeam with folding locks (not available with front extension), provided free of charge The transport of filled tank containers is excluded. Lrsdpfozazznjx Abysn Without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part, for load equalization, manufacturer: Jost 2 chock blocks with holders Side underrun protection Rear underrun protection Semi-shell fenders With anti-spray flaps according to EC Rear impact protection Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing 1310/1410 mm Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5" manufacturer Fulda with M+S marking Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable 2 additional LED work lights, at the rear on both sides, switched via reversing light Operating instructions Note: Transport of filled tank containers is excluded! Country of registration/Signs Germany With Dekra approval and certificate (according to §13 EC - FGV) Prepared for single-row license plate holder Warning sign according to ECE - 70 ADR warning sign at the rear, foldable Contour marking with reflective strips according to ECE R 048, yellow on the sides and red at the rear Paint Frame RAL 3020 traffic red "10-year warranty against rust-through" Landing gear black coated

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. Lodpfx Abjxxvp Noyern – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: excellent (used), Year of construction: 2003, AZO Single Big-Bag Unloading System – Complete with Screening and Dust Extraction System --> vacuum conveying. - Year of manufacture: 2003 - Dimensions L x W x H: 1600 (+1400 mast) x 1600 x 5000 - Material: Stainless steel - Double vibration motors - Condition: Excellent! - Including hoisting motor. For sale: a robust and complete AZO single big-bag unloading system, suitable for the low-dust and efficient processing of powders, granules, and other bulk goods. This system is equipped with a heavy-duty crossbeam with a lifting capacity of 2,000 kg, allowing larger big bags to be handled easily. The included lifting beam with electric hoisting motor and remote control has a capacity of 1,250 kg, which ensures safe and user-friendly lifting and positioning of the big bags. Ledpozb I H Tofx Abyorn For optimal product quality, the system is equipped with a vibrating screen installation, supplied with two different screen decks, making the system flexible for various products and applications. The installation has 2 vibration motors, one on the big bag saddle and one in the vibrating screen itself for optimal vibration. Behind the screen is a dust extraction system with a dust filter, which effectively limits dust formation during unloading and maintains a clean working environment.

Condition: used, mileage: 42,000 km, power: 175 kW (237.93 HP), first registration: 01/2025, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, loading space length: 7,270 mm, loading space width: 2,455 mm, loading space height: 2,588 mm, Equipment: ABS, electronic stability program (ESP), tail-lift, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and reasonably priced vehicle with a verifiable service history from us! MB ATEGO 1224 with sliding tarpaulin on the left side Loading capacity 1,500 kg Tow hitch Rear view camera Rear axle with air suspension, lifting and lowering function Special equipment: Trailer brake 2-line, trailer coupling: central axle trailer G 145, trailer socket 24V / 15-pole, audio system: CD radio (Bluetooth, USB), battery 165 Ah, side indicator lights white, vehicle outline lights LED, electric windows, transmission - mechanical gearshift, info display 12.7 cm with video function, frame extension, switch for loading platform, rear crossbeam for trailer coupling (central axle trailer), sun visor external, socket in cab 24V, daytime running light LED, underrun protection on the side, warning device for seat belts Additional equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, front mirrors, exhaust pipe to the center of the vehicle, exterior mirrors electrically adjustable, left, cockpit Classic, compressed air tank steel, two-step entry, driver assistance system: brake assistant (Active Brake Assist), driver assistance system: lane keeping assistant, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf spring / air, suspension: front springs 5.1 t, generator 100 A, transmission 6-speed - type: G 90-6, urea tank (AdBlue): 25 L, manual lift roof (steel), rear axle differential 390, body/superstructure: chassis, fuel tank: 120 L, light and rain sensor, heated air dryer, engine 7.7 L - 175 kW R6 diesel (OM 936), engine brake, engine compartment encapsulation, wheelbase 4760 mm, disc brakes on front and rear axles, seat cover / upholstery: fabric, seats in cab: passenger single seat, fixed, seats in cab: driver's seat, standard suspension seat, splash guard rear mudguard, stabilizer rear axle, control type cab, tachograph / EG control unit, underrun protection rear fixed, underrun protection front, preparation for toll collection, immobilizer, permissible total weight 11.99 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We will arrange your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING Upon request, we will gladly provide you with a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV / HU / UVV loading platform inspection / LGS inspection / tachograph inspection / installation of OBU device and service by our BRAND WORKSHOP before departure Ljdpfx Asy Hzl Ujbyjrn TOLL / ROAD FEES Toll can be booked on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale according to our general terms and conditions. The information on the internet is a non-binding description. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,500 h, machine/vehicle number: A1240A0666, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, table length: 4,000 mm, table width: 2,000 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 4,000 m/min, feed rate Y-axis: 2,000 m/min, overall weight: 14,500 kg, total length: 12,000 mm, total width: 5,300 mm, total height: 2,200 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TRUMPF TruLaser 3040 (L32) laser cutting machine with 4000 W power, year of manufacture November 2019, the machine has been in use only since 2020. The machine is in very good condition, fully operational, and has been serviced regularly every 6 months by an authorized service provider. Technical data: TRUMPF TruFlow CO2 laser - max. power TruFlow 4000 (programmable in 1% increments): 4000 W Working area: Lodpfx Absy D Ryvjysrn X axis: 4000 mm Y axis: 2000 mm Z axis: 115 mm Maximum sheet weight: 1800 kg Dimensions and weight: Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,500 kg TRUMPF CNC control system based on Siemens Sinumerik 840D: Maximum mild steel thickness: 20 mm Maximum stainless steel thickness: 15 mm Maximum aluminium thickness: 10 mm Gas consumption: Laser gas CO2: 1 l/h Laser gas N2: 6 l/h Laser gas He: 13 l/h Cutting gas: O2, N2 depending on application Laser cooling: closed-loop system Total device power consumption (including cooling unit): with TruFlow 4000 – max. 61 kW Compressed air consumption: with TruFlow 4000 – 31 Nm³/h Paint - color: Fixed machine parts, extraction, control cabinets, cooling unit: blue - RAL 250 20 20; frame crossbeam and laser unit: white - NCS S 0505 R80B.

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 7 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW 160 MM BEAMS HOOK AND STANDARD LANES CRADLE  REF.: 25-N-26 OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 4.20 m REAR CROSSBEAM WIDTH: 1.80 m with two rollers HOOK HEIGHT: 1.47 m / 1.48 m LANES: 1.06 m WEIGHT: 280 kg Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA Lrjdpowct Hvsfx Abysn operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Year of construction: 2020, condition: new, The ROMER company is also involved in the production of suspended transport systems. Cross traverses (Cross transports) are designed and manufactured for specific installations Examples of equipment are presented below: Transport systems Lredpfx Abefzcdtsyon Depending on the customer's requirements, the transport systems can move on the floor or be hung on poles. - For comfortable solutions for manual installations, we recommend suspended crossbeams (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have, for example, several cabins with different colors, flexible solutions are used with the use of a power-and-free conveyor. This is the most expensive solution.

Year of construction: 2020, condition: new, Transport systems Lodpsfz Dubofx Abyern Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, The ROMER company is also involved in the production of suspended transport systems. Cross traverses (Cross transports) are designed and manufactured for specific installations Oghxp Examples of equipment are presented below: Transport systems Depending on the customer's requirements, the transport systems can move on the floor or be hung on poles. - For comfortable solutions for manual installations, we recommend suspended crossbeams (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have, for example, several cabins with different colors, flexible solutions are used with the use of a power-and-free conveyor. This is the most expensive solution. Ljdpfx Abefz Difsysrn

Year of construction: 2020, condition: new, The ROMER company is also involved in the production of suspended transport systems. Cross traverses (Cross transports) are designed and manufactured for specific installations Lrsdjfz Dibjpfx Abysn Oghxp Examples of equipment are presented below: Transport systems Depending on the customer's requirements, the transport systems can move on the floor or be hung on poles. - For comfortable solutions for manual installations, we recommend suspended crossbeams (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have, for example, several cabins with different colors, flexible solutions are used with the use of a power-and-free conveyor. This is the most expensive solution.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. Lsdpfofz Dt Nsx Abyern In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Ljdjfz I D Depfx Abysrn Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Ljdpfx Ajfz I Edobyern The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Lrodpeflmdwefx Abysn All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Lsdefz Nb Topfx Abyorn Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. Ljdefz U S Ejpfx Abyjrn In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, functionality: fully functional, mileage: 6,23,500 km, fuel type: diesel, color: blue, driver cabin: sleeper cab, emission class: euro1, Year of construction: 2007, Equipment: crane, IVECO EUROSTAR 240E52 6x2 - Year 1995 DIESEL/ Euro 1 Mileage: 623,500 km Manual transmission/ Engine displacement: 17,173 cc/ Power: 378 kW Lsdpfx Ajzadtmsbyjrn GVW: 260 quintals Payload: 11,930 kg/ Wheelbase: 4,200 mm Accessories: - Sleeper cab Equipment: - TIPPING BODY: 5140x2550 mm - AV V819 3S crane + 2S antenna * Crane year: 2001 * Rear crossbeam * Remote control

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, Model: C12 Working Area: 12500mm*2600mm Laser Output Power: 40kW/30kW/22kW/20kW/12kW/6kW/3kW Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 110m/min Max. acceleration: 1.5G 1.Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost. 2.One-click Processing All functions of the system are distributed logically and orderly to achieve fully automatic mass production. 3.No Quiver when Cutting Thin Sheet C Series is capable of cutting edges of thin sheets and ensures no quivering marks. 4.Stretching Aluminum Crossbeam Rigidity increases by 60% Weight goes down by 20% Equipment running speed increases by 50% 5.Welded Bed with Tenon-and-mortise Joint Each frame of bed is welded after mortise-and-tenon joint to achieve better stability and firmness. Ledpfx Aog D Ny Tebyjrn

Condition: used, total length: 10,300 mm, total height: 4,000 mm, shelf height: 4,000 mm, frame width: 900 mm, This package includes: 4 x uprights, 4m high x 90cm deep 12 x crossbeams, 330cm each including accessories and grating Ledpfx Abezavi Hoyorn Results in a single row with 3 bays and 2 levels per bay, total length approximately 10300cm 400m available immediately! Manufacturer: Galler Type: Wide-span shelving Condition: used, good Height: 4 m Length: approx. 1 x 10.30 running meters Frame depth: 0.90 m Construction: Plug-in system Shelf load: 1200 kg per shelf Accessories such as: Floor fixing Connectors Load warning signs Impact protection Guardrails Grated flooring Rear panel grating Depth stops Barrier railings and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex warehouse. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and non-binding. Subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). No warranty for defects in used and IIa goods. The respective manufacturer's warranties apply to new goods.

Condition: new, maximum load weight: 73,540 kg, overall weight: 1,02,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: Lodpfxjxbmpls Abyjrn * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: new, Shelving frame column cover. The Mega-M storage rack leg bumper is made of yellow lacquered steel. It has 4 holes for permanent installation in the floor and lateral holes for attaching e.g. a horizontal beam. The buffer provides greater safety for forklifts to move around the warehouse, reducing the risk of serious racking repairs. -Made of yellow lacquered steel. -Universal and easy to install. -Mounted on the front side of the racking. -Makes it possible to attach horizontal beams. -Used in industry to protect shelves from mechanical damage. -Increases safety, reducing warehouse maintenance costs. The offer concerns the leg bumper: Product code: MTP001334 - Height: 400 mm - Width: 170 mm - Length: 300 mm - Metal thickness: 4 mm Ledpfxsm Sg Dhj Abysrn - Mounting hole diameter: 15 mm - Colour: RAL1023 yellow - Pallet quantity : 108 pieces Net price : 11 euro each. We have a wide range of shelving components, both new and used: frames, crossbars/beams and shelving fillings: crossbeams, WEMA gratings, mesh shelves or chipboards. Prices quoted are for the sale of wholesale quantities for export outside Poland, please contact us for details. Would you like to check wholesale and retail prices within Poland please contact us. * The above price is valid for a minimum purchase of one pallet. * Transport throughout Europe possible. * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: new, maximum load weight: 29,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, loading space volume: 54 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5696 New vehicle! Available for rent, purchase, or lease with an option to buy! 54 m³ Kempf grain tipper semi-trailer with a discharge gate / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Type: SKM 36/3 AK - High-performance discharge gate tipper with 3 compartments * First registration: - (NEW) * Volume: approx. 54 m³ (10.00 m x 2.43 m wide x 2.20 m high) * Total weight: 36,000 kg * Unladen weight according to manufacturer: 7,000 kg * Payload: approx. 29,000 kg * Axles: 3x SAF axles / 1st axle can be lifted / disc brakes * Tires: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with raising and lowering / quick release * EBS Wabco * Combination door (swinging + split door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Kempf 400 steel discharge gate with a throughput rate of 30-40 m³/h, with control panel on the rear right * 2x partitions with 3 locking positions * Open hose storage on the right * 1x grain slide with hopper * 1x vibrator * Saddle height of 1,170 mm - 1,230 mm * 1x approx. 4.00 m ladder on the left * 1x water tank on the right * 1x air connection on the rear left * 2x toolboxes on the left * Individual mudguards * Aluminum outrigger supports (full load supports) * Tarpaulin with central locking * Operating platform at the front with access ladder on the left * Folding tarpaulin supports * 3x crossbeams * Sight glass at the rear right * Loading pressure gauge * Shovel and broom holder * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights New vehicle! Also available for RENT! Note regarding potential errors in the advertisement: Ledpfx Aey U Dlyebyjrn Despite careful preparation of the advertisement, errors may have occurred in the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 2,800 mm, total height: 10,500 mm, load capacity per storage section: 1,800 kg, STOW 10500x1100 mm + beams 2800 mm 100x50 – pallet racking available immediately For sale: high-quality used STOW pallet racking originating from a modern class A warehouse. The system is in excellent technical condition, having been regularly used for a short period of time. Specification: - STOW frame: 10500 x 1100 mm - Upright profile: 100 mm - Beam / crossbeam: 2800 mm - Beam profile: 100 x 50 mm - System ideal for 3 Euro pallets per level - Suitable for constructing both high-bay storage and picking levels Available quantities: - approx. 580 frames - over 3,400 beams Advantages: - very fast material availability - solution up to 30–50% cheaper than new racking - ideal for new warehouses, expansions, and relocations - possibility to configure the system for a bespoke warehouse layout - compatibility with popular warehouse accessories This system is perfectly suited for both traditional pallet storage and creating order picking levels. Additionally, we offer: - dismantling and installation - domestic and international transport Ljdjy Enb Tjpfx Abyern - warehouse layout design - protection guards, mesh, backstops, and accessories - new and used racking systems Each project is approached individually — for high-bay storage, correct calculations, safety, and a proper configuration selection in line with current standards are crucial.