Used Okuma Lvt 300 for sale (229)

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Hodpfjku Aaaox Akrel Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2005, number of axes: 2, This Okuma LVT 300 was manufactured in 2005. It features a stable, precise design with recent upgrades including a new SMW clamping cylinder and chuck in 2020, and a completely overhauled Z-axis with new guideways and spindle. Additional features include an EWAB conveyor for automated parts logistics and extensive tool holders. Consider the opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. • 2020: SMW clamping cylinder replaced • 2020: SMW chuck replaced • Z-axis completely overhauled: new guideways, new spindle • Stable, precise Okuma design Additional equipment • EWAB conveyor for automated parts logistics • Original Mayfran chip conveyor (replaced in 2022) • Many jaws included • Extensive tool holders included Hodpfx Asynbdrjkrsl

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Turning length: 200 mm Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Turret head: Yes, 12 positions VDI 40 Hsdpfx Aewufc Tekrjl Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm X-axis travel: 210 mm Y-axis travel: 330 mm C-axis travel (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Hedjxnlh Tspfx Akrel Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Feeder belt Three pallets Note: The tool holders and tools visible in the working area are not included in the scope of delivery or sale. Any oil mist extraction unit or pallets shown on the feeder belt in the photos are also not included in the sale or delivery.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Hedpox I Axrefx Akrel Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Hodpfoyyk I Ejx Akrel Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Year of construction: 2000, CNC Lathe Okuma LB 300-M Control: OSP-U100L Year of manufacture: 2000 Internal machine no.: 16 Hsdpfx Ajylv Utekrol Turning length: 1,000 mm Turning diameter: 430 mm Spindle speed: 4,200 rpm Tool turret: 12 positions (driven) Mount: VDI 40 Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck Tailstock Parts catcher Short bar loader Samsys 3000 (optional)

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 5,000 rpm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, total height: 2,330 mm, overall weight: 10,000 kg, product length (max.): 3,530 mm, number of axes: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information. • Distance between centers: 1,200 mm • Max turning diameter: 350 mm • Rotating diameter over guards: 550 mm • Spindle / counter-spindle: ASA 8 • Bar capacity: 65 mm • Tailstock / counter-spindle travel (W axis): 940 mm • X axis travel: 270 / 230 mm • Y axis travel: ±60 mm Hjdsx Imriopfx Akrsl • Z axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Rapid traverse Y axis: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret indexing time: 0.25 s • Live tooling speed / power: 100–4,500 rpm, 7.0 / 3.3 kW

Condition: used, Year of construction: 2001, turning diameter 80 mm turning length 800 mm control OSP-U100L Hodpfx Aoymgcdekrol total power requirement 22 kW weight of the machine ca. 6,3 t

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,810 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 1,144 mm, rotational speed (max.): 4,500 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 300 mm Spindle bore: 68 mm X-axis travel: 235 mm Z-axis travel: 1,144 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 MACHINE DETAILS Power-on time: 33,509 h NC run time: 10,810 h Spindle run time: 9,643 h Control: OSP P300L-R Hsdpjx Exqfsfx Akrjl Weight: 6,300 kg Required footprint: 3.55 m x 2.35 m x 1.93 m EQUIPMENT Chip conveyor Chuck (diameter: 250 mm) Touch setter Tailstock

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OKUMA V-Turn LVT 400 CNC Vertical Turning Lathe Hsdsxwy S Eopfx Akrol (2 machine cell) Model: LVT 400 Control: OKUMA OSP 1000L Year: 2006 12 – tool turrets Hi – Power 60 Bar High Pressure coolant Swarf Conveyor Work Measurement Carousel System linking with both machines with turnover station

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: Hodpoxxifkofx Akrjl In operation

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Hjdoxxh Udopfx Akrol Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min Hjdpfx Asxxrbbokrel - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm - Weight: 1,500 kg

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges Hsdpfx Aksxxiiierol - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools Hedjxxihfopfx Akrsl - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: Hodpfxsxxidas Akrol - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 1,000 mm, turning diameter: 630 mm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, rotational speed (max.): 10,000 rpm, Equipment: rotational speed infinitely variable, Technical specifications for Okuma Multus B300-W with Y-axis and bar loader Year of manufacture: 2010 Machine configuration: • Control: Okuma OSP200A (including simultaneous use of Hi-Cut PRO and CAS) • Tool spindle: 10,000 rpm with HSK-A63 • Air blast through spindle center • Tool magazine: 60 stations • Workpiece catcher • Renishaw 3D probe RMP60 including preparation for in-process measuring • Swarf conveyor: hinge belt Interlit • High-pressure pump: Brinkmann TM26/180 • Preparation for oil mist extraction • Short bar loader: SAMSYS Multi-3000LR 1240/65 Main spindle: • BigBore with A8 spindle nose – speed: 38-3,800 rpm • A8 add-on kit for through-hole clamping for max. 65 mm bar diameter Hsdpfx Aeyiayxokrjl • SMW collet chuck, axial draw – Hainbuch Spanntop system Counter spindle: • Max. speed: 5,000 rpm with A6 spindle nose • A6 add-on kit for through-hole clamping • Workpiece ejector for counter spindle, Ø 52 mm Working area: • Maximum turning diameter: Ø 630 mm • Swing diameter over cross section/bed: Ø 630 mm • X-axis travel: 580 mm – rapid traverse 40 m/min • Z-axis travel: 935 mm – rapid traverse 40 m/min • Y-axis travel: 160 mm (+80/-80) – rapid traverse 26 m/min • W-axis travel: 1,000 mm – rapid traverse 20 m/min • B-axis is incremental, 0.001 degree Weight: approx. 10,300 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Hodpfx Aksy Ewy Sorel Control: OSP-P 300SA Year of manufacture: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,100 kg, product length (max.): 3,900 mm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details. • Control system OKUMA OSP P200L • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 stations • Number of revolvers 2 • Tool holder BMT 60 • Number of tools 24 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Y-axis travel mm • X-axis travel 200 mm • Z-axis travel 1000 mm • Hydraulic clamping Y-axis • Sub-spindle with W-axis • Spindle configuration twin spindle • Main spindle bore 110 mm • Spindle bore approx. 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 4200 rpm • Main spindle drive VAC 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 360 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mmMachine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight approx. 6100 kg • Maintenance contract yes • Utilization 60% Additional equipment • Bar feeder • OPTIONAL for an additional charge: Approx. 200 tools available, collets, power tools Technical Specification Counter Spindle No Hedpfxjy Ddtvs Akrsl Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 925 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 600 mm, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of axes: 5, This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details. • Table/C-axis diameter: 630 mm • Max machinable dimensions: Ø 830 x 550 mm • C-axis rotation: 360,000 positions / 360° continuous • A-axis rotation: +90° to -120° • Table–spindle distance: 60 – 660 mm • Rapid feed (X/Y/Z): 50 m/min • Max working feed: 50,000 mm/min • Positioning accuracy (X/Y/Z): 0.004 mm (Std JIS) • Repeatability (X/Y/Z): mm (Std JIS) • Spindle taper: BT50 Big Plus Hjdpfjy Dc Niex Akrsl • Tool magazine: Matrix, 98 positions (expandable to 166) • Axis feedback: X–Y–Z optical scales • Operational hours: Power on 25,683 h; Operating 10,364 h; Cutting 9,209 h • Included control/software options: 5-axis continuous Super-NURBS kit, Center tool programming, Tool length compensation, DNC-DT connection, Tool orientation command Additional equipment • Mayfran MT10 chip conveyor • Renishaw TS27R tool setter • Renishaw RMP60 workpiece probe • 5-axis calibration kit • Shower wash • Pallet changer ready (preparation) • Industry 4.0 kit (registered 2026) Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm Hedpfoy Aaxrjx Akrjl • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2008, 2008 Okuma LB3000 EX CNC Lathe with Driven Tooling and Okuma OSP-P200L Control Hsdpey Dr I Ijfx Akrsl Max. turning ø340mm. Max. turning length: 1,000mm. Swing over bed: 580mm. Swing over carriage: 470mm. Spindle bore: ø80mm. Spindle capacity: ø120mm. Spindle speed: 45–5,000 rpm Z-axis: 1,065 mm. Y-axis: 260mm. Turret: 12-station (all driven tooling). Driven tool speed: 45–6,000 rpm. C-axis: 360° indexing. Tailstock: MT5. Spindle motor power: 22 kW. S/No. 141960 (2008) Machine weight: 6,150 kg. Overall dimensions (L x W x H): 3,500 x 1,900 x 2,000mm. Includes swarf conveyor: Approx. 4,700 x 600 x 1,500mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC turning centre with driven tools, workpiece removal paddle, automatic tool alignment eye, chip conveyor, and material feeder. OSP-P300L CNC control system with 15” colour touchscreen panel Motor hours Power-on time: 65,458 h (as of 18.03.2026) NC operating time: 36,054 h Spindle running time: 19,533 h Cutting time: 16,582 h Power consumption 33.1 kVA Max. swing diameter: 480 mm Max. machining diameter: 340 mm Max. turning length: 785 mm Collet chuck + 10” hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through cylinder SS 1770, draw tube Main spindle: JIS A2-6 spindle nose, bore diameter 80 mm, built-in motor Spindle speed range: 45 - 5,000 rpm Power/continuous rating: 22 kW/15 kW Continuously controlled C-axis, 3,600 s with 0.001° increments Sub-spindle Speed range: 50 – 6,000 rpm Power/continuous rating: 11 kW/7.5 kW Spindle nose diameter: 140 mm, bore 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6” hydraulic chuck B206-01, 3 sets of soft jaws (Schunk KM-WBL 62) Hydraulic through cylinder SS1243, draw tube Hjdpoy A N Hxjfx Akrsl Sub-spindle travel - NC axis W stroke for W450: 595 mm Spring-operated part ejector from sub-spindle W-axis overload monitoring (drive torque) Tailstock clamping in sub-spindle Turret head Number of tool stations: 12, fixed and driven BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Driven tools Drive power: 7.1/4.1 kW Speed range: 45 – 6,000 rpm Rapid traverse speeds Rapid traverse in X and Z axes: 25/30 m/min Rapid traverse in C axis: 200 rpm Travel distances X axis: 260 mm Z axis: 510 mm Y axis: 115 mm (+70 mm / -45 mm) Machine data Width: 3,330 mm – without feeder and conveyor Depth: 1,800 mm Height: 2,250 mm Machine weight: 5,250 kg Accessories: - OSP-P300L Advanced One Touch CF-M-E set includes: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Machining time overrun control Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Cycle time reduction function Hi-Cut Pro function Spindle speed control function - High-pressure cooling, max. 20 bar, max. 50 l/min - ILS material feeder type MUK 7012 with bar magazine 6-70 mm/1250 mm, built in 05/2014, manufacturer: Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. - FILTERMIST FX4002 extraction unit Machine equipment: - Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on main spindle) collets dia.(mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets dia.(mm): 55-60-65 - Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on sub-spindle) collets dia.(mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 - Holders: Axial tool holder – 5x Turning tool holder – 5x Cut-off blade holder – 2x Double-sided face driven holder – 3x Cross driven holder – 3x - Reducer adaptor tube (custom-made) - Reductions – nylon dia.(mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 06/2019 spindle repair due to defective bearings. 06/2025 replacement of control unit U4. 10/2025 replacement of control unit M. Repairs were carried out by the manufacturer’s (supplier’s) service technicians, replacement parts used were genuine after overhaul.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 515 mm, turning diameter: 520 mm, spindle bore: 66 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 565 mm, overall weight: 4,400 kg, One-Touch IGF (soru-cevap diyalog programlama özelliği var) 2024 model OKUMA LB3000EXII CNC TORNA KONTROL OSP-P300LA KATALOGUNU EKLEDİK İNCELİYEBİLİRSİNİZ. 2 EKSEN ÇEVİRME ÇAPI 520 MM İŞLEME ÇAPI 410mm İŞLEME BOYU 515 mm Hodpoywhfiefx Akrel FENERMİLİ DELİK ÇAPI 66 mm PUNTA KONİGİ MT-5 PROGRAMLI PUNTA VAR 5000 DEVİR AGIRLIGI 4400 KĞ Almanya ve Fransa' da referans verebiliriz.