Used Okuma Lu 15 M for sale (202)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Okuma LU15-MY Year of manufacture: 2001 Commissioned: 2002 Nwedpfx Aaozh Iwke Ujk Control system: U100L A video of the machine can be viewed on our website. Machine features: ▪ IGF dialog programming ▪ Movable tailstock ▪ Powered tools – 12 stations on the A-turret ▪ C-axis ▪ Y-axis ▪ Touch probe ▪ Preparation for steady rest on the B-turret ▪ Internal chuck ▪ Signal tower ▪ Mayfran chip conveyor Technical details: • Max. turning diameter: 340 mm • Max. turning length: 1000 mm • X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) • Z-axis travel: upper 1,040 mm; lower 1,015 mm • C-axis travel: 360° • Spindle – number of speed steps: 2 – automatic • Bore diameter: 62 mm • A-turret (upper): 12 tools, all suitable for M-tools, VDI 40 • B-turret (lower): 8 tools, VDI 40 • Rotating tool speed: 45~4500 min -1 • Rapid traverse feed rate: mm/min X: 15,000 Z: 20,000 C: 200 min -1 • Tailstock quill diameter: 90 mm • Tailstock quill stroke: approx. 100-120 mm ▪ Machine dimensions including chip conveyor L x W: approx. 4300 x 2200 mm ▪ Machine height: approx. 2230 mm ▪ Weight: approx. 7900 kg Optional: ▪ Transportation organization and execution ▪ Machine delivery and installation ▪ Machine commissioning

Condition: used, 4 Axis Njdpfx Aajy Drune Ujwk Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Nsdpfjwmdv Njx Aa Uewk

Condition: excellent (used), functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, CNC Lathe Manufacturer: Okuma Model: LB15 II-M 1SC-1000 Year of Manufacture: 1996 Control: OSP-7000L Country of Origin: Japan Delivery: Ex-stock Machine Features - Long turning length - Tailstock - Chip conveyor - Live tooling - One touch - IGF - Touch setter Technical Specifications - Working Areas Nwjdezmgcvepfx Aa Uok - Swing diameter: 340 mm - Max. turning diameter: 350 mm (chuck work) - Max. turning length: 1000 mm Travel Distances - X-axis: 260 mm - Z-axis: 1020 mm Spindle - Speed: 45~4500 rpm - Standard spindle bore diameter: 62 mm - Spindle front bearing bore diameter: 100 mm - Chuck passage: 52 mm Turret - Number of stations: 12 - Tool holder: VDI40 - Indexing time station to station: 0.1 sec Feed Rates - Rapid traverse X/Z: 15,000/20,000 mm/min Tailstock - Quill diameter: 90 mm - Quill stroke: 120 mm Main Drive - Spindle motor: 15/11 kW Machine Dimensions: approx. 3315 x 1895 mm Machine Height: approx. 1905 mm Weight: approx. 5700 kg Optional - Transport organization and handling - Machine installation and setup - Commissioning of the machine

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1938, turning length: 850 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, workpiece length (max.): 850 mm, workpiece diameter (max.): 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 850 mm Turning diameter: 340 mm Spindle speed max.: 4,500 rpm Workpiece diameter max.: 300 mm Workpiece length max.: 850 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 MACHINE DETAILS Control system: Okuma OSP 7000L Nedpfxey R Uxio Aa Ujwk Power max.: 22 kW Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption max.: 30.1 kVA Total current consumption: 43.4 A Motor current consumption max.: 106 A Current interruption at: 10 kA Note: Since other machines need to be moved to allow for loading, the stated disassembly and loading costs apply.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Nwsdpju U E Avsfx Aa Uok Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Nwodpfox Hx Dnjx Aa Uek Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) Nwedpjyviigofx Aa Uok ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Nwodpsyu N Uxofx Aa Ujk

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Chip conveyor: [YES / NO] Tailstock: [YES / NO] Nwodpfxezwdw Ee Aa Uok Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction CNC turning and milling capability C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing The machine has a 3-year-old refurbished main spindle and X-axis.

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: MW137, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle Nedpfx Aaexxh Udj Uewk - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of positions: 12 lower turret stations, all driven - Maximum speed: 4,500 rpm; Milling spindle power: 4.5 kW Electrical Equipment - Operating voltage: 400V (3-phase), fuse protection: 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm; Weight: 5,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip evacuation, parts catcher + custom-made conveyor belt - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Swarf (chip) extraction conveyor - Fire suppression system - Tool measuring system (Q SETTER) - Broken tool detection: Load monitoring with auto-learning analyzer via OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Electronic and print manual available Optional: - Bar feeder: FMB Model: Turbo 10-72XT/3200/A - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm; Weight: 1,500 kg Machine status: NOT OPERATIONAL - X-axis encoder: faulty

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm Nodpfx Aaoxxidas Uowk - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 0607.1447, turning diameter over cross slide: 340 mm, turning length: 520 mm, turning diameter: 530 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance Y-axis: 260 mm, travel distance Z-axis: 520 mm, spindle motor power: 15,000 W, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 20 m/min, total height: 1,750 mm, total length: 3,000 mm, total width: 1,700 mm, type of input current: three-phase, overall weight: 5,000 kg, Equipment: documentation/manual, Control: OKUMA OSP5020L 12 tools Automatic chip conveyor Nedpfx Ajy Stxqsa Ujwk

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° Nedpexxihfofx Aa Uowk - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Njdpfx Aexxifkea Ujwk Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 Njdpfsxxiiisx Aa Uswk - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm Njdexxrbbepfx Aa Uewk - Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Swinging diameter over cross slide: 370 mm Turning length: 1,000 mm Swinging diameter: 350 mm Spindle bore: 62 mm Spindle speed (max.): 5,200 rpm MACHINE DETAILS Coolant pump: 8 bar EQUIPMENT Documentation/Manual Speed infinitely adjustable A-turret VDI40, 12 stations (all powered) B-turret VDI40, 8 stations Touch setter for A & B turrets Tailstock, manual Chip conveyor Extraction system Nwodpfx Aajy S S Ans Uok Bar feeder, Samsys Multi-3000

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Turning diameter: 340 mm Nedpsy Txycsfx Aa Uswk Spindle speed (max.): 4,800 rpm Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, OKUMA MU-6300V (2023.11) – Technical Specifications Model: MU-6300V Simultaneous 5-axis Vertical Machining Center Water-soluble coolant CNC Control: OSP-P500M Display language: Korean Power supply: 220V / 60Hz Operating voltage: 100V CE + EMC compliant Axis Travels X-axis: 925 mm Y-axis: 1,150 mm Z-axis: 600 mm A-axis: +90° / −120° C-axis: 360° continuous Simultaneous 5-axis machining Feed Rates Rapid traverse (X/Y/Z): 50 m/min Cutting feed: 50 m/min A-axis rapid speed: 10,800°/min C-axis rapid speed: 32,400°/min Table diameter: Ø630 mm Table configuration: 6 radial T-slots (18H7) Spindle taper: BT40 (MAS BT40) BIG PLUS dual-contact spindle Spindle speed: 50–15,000 rpm Main motor: 22 kW (10 min) / 18.5 kW (continuous) Spindle oil cooling TAS-S spindle thermal compensation TAS-C ambient thermal compensation Tool Magazine 32-tool Automatic Tool Changer (ATC) Air blow for ATC Taper cleaning air blow Standard tool release system JIS pull studs Measuring System Absolute linear scales on X/Y/Z axes Renishaw TS27R automatic tool setter and tool breakage detection Renishaw RMP60 wireless workpiece probing system Calibration reference tool included Manual measurement function 5-Axis Functions Tool Center Point Control II (TCP/RTCP) Hyper-Surface II Slope Machining Function Inverse Time Feed Manual Tool Center Point Transfer Table Coordinate System Transfer DNC-DT Accuracy & Compensation Five Tuning Kit Geometric error measurement Geometric error compensation Straightness compensation Dynamic displacement compensation Coolant System Through-Spindle Coolant (TSC): 1.5 MPa Through-spindle air blow Standard coolant pump: 390 W Wash-down pump: 800 W Through coolant pump: 1.1 kW Cyclone + sintered bag filtration system Chip Handling Floor-type hinge chip conveyor Conveyor height: 750 mm Right-side chip discharge Safety & Protection Full enclosure with roof Y-axis guide cover CE-compliant door interlock CE + EMC export specification 220–480V transformer KCS machine nameplate Operator Interface 21.5-inch adjustable OSP control panel Smart OSP Servo Navigation AI Servo Navigation SF ECO Suite Plus ECO Power Monitor OSP Software Features 4 GB program storage 10 MB operation buffer 999 tool offsets 200 work coordinate systems Tool Life Management Tool Wear Compensation Nedszhgh Iopfx Aa Uowk Real 3D Simulation NC Operating Monitor Simple Load Monitor Tool Damage Detection Programmable Messages Programmable Mirror Image Program Stroke Limit Automatic Program Update Automatic Power-Off Function Digital Twin Functions Digital Twin DMC Kit Hyper Simulation Quick Modelling Interactive MAP (I-MAP) OPC UA for Machine Tools Additional Equipment LED work lights Three-color status indicator Mist collector connection (Ø150 mm) Virus protection system

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning diameter: 340 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 38 rpm, total height: 1,745 mm, total length: 2,200 mm, total width: 1,720 mm, overall weight: 4,300 kg, Okuma SpaceTurn LB300-M Nwedpozh Hu Usfx Aa Usk CNC Okuma OSP U100L Controller Max. turning diameter 340 mm Max. turning length 480 mm Distance between centers 500 mm X-axis travel 280 mm Z-axis travel 500 mm C-axis 360° (0.001 increment) Rapid traverse X-axis 20,000 mm/min Rapid traverse Z-axis 25,000 mm/min Incremental feed rates for X and Z axes from 0.001 to 1.000 mm Spindle mounting A2-8 Speed 38-3800 rpm Power 22 Kw Powered tools Speed 45-4500 rpm Power 3.3 Kw Turret Type VDI 40, 12 Stations Square tool section 25 mm Bore section 40 mm Tailstock Bore diameter 90 mm Bore travel 120 mm Tailstock mounting MT5 Chip conveyor Kitagawa B210 chuck

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Nwjdpfxsztctqe Aa Ujk Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1997, spindle speed (max.): 6,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 240 mm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Okuma LB15i-M was manufactured in 1997. It features a spindle speed of up to 6000 rpm and a spindle power of approximately 15 kW. The machine includes 5 motorized front tools and 2 radial tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Okuma LB15i-M horizontal turning machine we have for sale. Contact us for further details. • Turret positions: 12 • Driven tools: Yes (5 front + 2 radial) • Tailstock: available (to be enabled) • Distance between centers: 500–1000 mm • Spindle nose: JIS A2-6 Nwjdpfxoywu Sis Aa Uek Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank Nwjdpfx Aaov S Svvs Uek - immediately available

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Nsdpfjy Suw Usx Aa Uswk