Used Gunther Injector for sale (143)

Year of construction: 2020, condition: new, Pneumatic connection 1 " Fedpsfz U Swefx Afpjpi • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean

Condition: used, Year of construction: 2018, Wagner electrostatic powder coating system for enamel application, year 2018, serial number 30210, with a touch screen control panel, consisting of: Fpsdpfxey Tn Ats Afpsi • 1 PVC spray booth with overall dimensions of length x width x height: 3200 x 2130 x 4000 mm • Dimensions of the part entry/exit opening: 1000 x 1000 mm • 1 HERDING filter (cyclone) with automatic powder recovery • 1 shaker for powder suspension with extraction and powder recovery • 1 EP powder feeder with 32 pumps (injectors) • 12 automatic spray guns, model PEA-C2, for enamel application, with a double blade head • 9 universal EPG/S2 control units for powder guns • 1 GCA compressed air treatment unit used in the system (heating/humidification) • 1 overhead monorail transport system, 35 m long, serving the spray booth. The line is located at the parent company in Italy, near the town of Pordenone. Direct contact is possible, upon prior arrangement.

Condition: used, overall weight: 69,000 kg, Year of construction: 2007, operating hours: 9,379 h, Engine: Isuzu, 6 cylinders, 345 kW – AH-6WG1X – EPA and CE compliant Boom: 6.58 m Stick: 3 m Ground plates: 650 mm All hydraulic lines (hammer/grapple and rotation) Hydraulic quick coupler: OIL Quick OQ90 or Lehnhoff HS80 Deep digging bucket – 4.55 m³ SAE Transport weight: 69 tons Transport width: 3.93 m Working width (4.14 m with outriggers) Transport height: 4.37 m Fpjdpfx Afjul U H Tepji The machine has been overhauled and repaired in our workshop. Report available upon request. Major inspection performed: All oils and filters replaced, including 650 liters of hydraulic oil. CASE Germany, March 2026: The engine has 6 new fuel injectors (invoice available upon request).

Condition: new, Year of construction: 2024, functionality: fully functional, Price for the purchase of a powder coating system – Negotiable!! • Electrical data: 100-240V 50-60Hz • Powder feed rate up to: 200g / min • Air consumption up to: 250L / min at 6 bar • Air quality / moisture: less than 1.3 g / nm3 • Air quality / oil: less than 0.1 mg / nm3 Data for the powder coating gun • Output voltage: 100 kV • Max. output current: 100 µA • Hose length: 6 m - antistatic hose • Polarity: Negative • Conformity: ATEX 2mJ Description • Applicator for quick color changes, ready to use out of the box • Intuitive 7" touch display • Automatic cleaning function – gun flushing • Up to 20 user-defined programs • 3 automatic programs • Remote control of paint quantity and program change from the handle Equipment • Controller of the PSS series • ProfiJector RI-1 blunt powder injector • ProfiGun powder gun with quick coupling and remote control • Set of hoses • Stand with vibrator and extraction unit with fluidization PSS driver • 7-inch touch panel, operable with gloves • 3 automatic programs (overcoating, hard-to-reach areas, flat surfaces) • Graduation in 0.1kV and 0.1uA steps • Advanced pneumatic valves for air flow control (romer - patent pending) • Actual air flow measurement responds to errors such as pressure drops or system blockages • Extended diagnostic tools • Possibility to name programs • Possibility to control external master controllers with ModBus protocol (A series) ProfiGun PM-1 gun • A lightweight ergonomic gun, perfectly balanced with a contoured handle • The ceramic cascade with a voltage of up to 100,000V efficiently charges all types of powders • The new nozzle generation ensures perfect powder penetration into complex shapes Fjdpfxsg U I Uge Afpspi • The profiled nut provides a good grip • The conductive handle with a high carbon content offers excellent grounding for the painter • The spray gun is made of special materials with increased impact resistance • Fully disassemblable design with a replaceable powder path tube • The spray gun is patented in the USA and the EU • Cascade polarity - negative ProfiJector powder coating pump Description • Design of a new efficient injector • The most effective feed angle, proven by research • Saves paint and air compared to injectors with a right angle • Compared to other pumps, it is characterized by relatively low operating costs • The injector is covered by a European patent

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L Fpjdpfoxm Rwqox Afpji 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: excellent (used), functionality: fully functional, mileage: 4,56,000 km, fuel type: diesel, wheelbase: 3,800 mm, fuel tank capacity: 1,200 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, trailer coupling, Iveco S-Way 570 FP Fsdpey T E Sxjfx Afpopi 2022 Full air suspension Intarder Static climate control Full LED headlights Dual fuel tank New injectors, with Iveco invoice.

Condition: new, Year of construction: 2025, VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM The powder coating system is designed for powder coating applications with frequent color changes during the day. The equipment is on a wheeled stand for ease of operation. Powder coating is sucked directly from the powder box, which allows rapid color changes. The powder box is placed on the vibrating table, suction pipe fluidizes the powder coating in the box, ensuring effective mixing, and the powder coating is homogeneously sent to the gun through an injector placed on the suction pipe. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 55 Kg VG4 CONTROLLER AND MANUAL POWDER COATING GUN The VM manual powder coating gun is completely dismountable. The ergonomic gun handle design ensures ergonomic handling and does not tire the operator during coating application. The high voltage cascade has a long service life, its tightness prevents contact with dust and minimizes the risks in this area. The well-designed head assembly and nozzle ensure excellent polarization and homogeneous coating on surfaces during application. The electronic touch panel on the back of the gun provides ease of use during operation. The control unit is digital and allows precise adjustment of settings via the touch panel. TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Powder output (3,5 bar) 500 g/min Protection class : IP 54 Voltage cable length : 5 m Powder hose length : 5 m Fodpovv N Tyefx Afpepi Gun weight (gross) : 450 g Operating temperature :-20-50 ° C Nozzle :Flat jet or Ø16-20-24mm deflectör

Condition: used, Spare parts for shot blasting machine or impeller wheel, Gutmann Type: AGS SWL 501 Fodpfjbfkbbsx Afpjpi Impeller blades, impeller wheel housing, injector, impeller wheel, elevator cups, wear plates, etc. NEW!

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Fodpfjdg Itnsx Afpjpi Numerical Control Power Control, Software WoodWOP Panels (workpieces) feeding by No. 3 motorized belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 50 Motorized carpet to evacuate chips and wastes Total installed power (Kw) 60 WORKING GROUPS (BOTTOM) Drilling heads with vertical spindles: No. 6 Indipendent vertical drilling spindles: No. 40 x 6 heads (tot. No. 240 spindles) Drilling head motor power: No. 6 x Kw 2,7 WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles: No. 4 (4 x Kw 2,7) Horizontal drilling spindles - Right side: No. 13 x 2 heads (tot. No. 26 spindles) Horizontal drilling spindles - Left side: No. 13 x 2 heads (tot. No. 26 spindles) Inserting nozzle and glue injectors (Right side): No. 8 (high-pressure) Inserting nozzle and glue injectors (Left side): No, 8 (high-pressure) Storage tanks for automatic feeding of the dowels: No. 2

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. Fsdpsd Nviqofx Afpjpi VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet Fsdpfxew Ug A Hj Afpjpi - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system - Total installed power KW 5 ca.

Condition: excellent (used), AUTOMATIC Drilling and Dowels inserting LINE (2 machines): W12054A) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 5 bottom vertical units (each with 2 swivelling drilling heads at various spindles, HP 2.3 ea) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 5 top pressing devices - No. 2 endless screws to evacuate the wastes. Fpedpjvnq Txefx Afpsi With NC (software Modul Tooling System) to control, manage and run the 2 machines of this line W12054B) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 8 inserting nozzles, such as Glue injectors and dowel drivers) - No. 3 bottom units (each with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 1 top vertical unit (with 2 swivelling drilling heads at various spindles, HP 2.3 each) - No. 3 Top pressing devices - No. 2 endless screws to evacuate the wastes.

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Fpsdod Nvi Djpfx Afpoi Total installed power (Kw) 38 WORKING GROUPS (TOP): Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Fpsdpjgwbbqofx Afpsi Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: used, Year of construction: 2004, Format: 320 ?? 550 mm Equipment: Sheet feeder: Two drum feeders with gripper system Belt conveyor channel for product conveying Surface with rice paper structure to protect the product Front stop made of aluminum Side guides with sorting screws for sheet positioning Screw ejector for precise bow positioning Sheet control system: Double sheet inspection using mechanical thickness measurement Misaligned bow detection using photocell Photocell-controlled activation of the second feeder and glue injection timing Glue unit: Hot melt or cold glue application (configurable) Glue injector with digital keyboard setting Delivery: Fpedpfx Afsyxqxbjpsi Double roller press station for optimal adhesion Inclined conveyor belt for shingled product stacking at the exit Control system: SPS control unit Touchscreen control panel Safety system with light barriers Technical data: Min. Format 100 ?? 150 mm Max. Format 320 ?? 550 mm Max. sheet thickness 5 mm Maximum mechanical speed 6,000 cycles/hour

Condition: like new (used), Automatic injector 123 needles Loading width: 420 mm Max. product height: 200 mm Needles quantity: 123 - 3 mm Transportation type: walking beam Pressure range: 0,5 - 4,5 bar El. 230/400 V, 50/60 Hz Connection value: 11, 0 kW 50/60 Hz Machine dimensions, mm: Length: approx. 2 200 mm Fpsdpfx Afoumk Txopei Width: approx. 1 100 mm Height : approx. 2 350 mm

Condition: used, We offer an industrial NOWICKI vacuum tumbler, model MA-2000 PSCH, year 2003 – a device designed for massaging and curing red meat, poultry, and bone-in cuts under vacuum conditions. The 2000-liter capacity tumbler with cooling is ideal for large meat processing plants, poultry processing plants, and premium product manufacturers where high efficiency, uniform curing, and consistent quality of the finished product are important. Thanks to its vacuum operation, the NOWICKI MA-2000 PSCH improves protein binding, tenderness, and juiciness of meat, while minimizing oxidation and weight loss. A robust drum with mixing blades ensures gentle but intense mechanical action on the raw material, which shortens the massaging process. Installed power of 4.1 kW, which guarantees stable operation in continuous mode. Compact dimensions for its capacity – length 3150 mm, width 1400 mm, height 1750 mm – allow the device to be conveniently placed in an existing hall, also in lines with an injector, brine mixer, and smoking and steaming chambers. Technical data: Manufacturer: NOWICKI Model: MA-2000 PSCH Year of manufacture: 2003 Type of device: vacuum massager with cooling Drum capacity: 2000 l Power: 4.1 kW Power supply: 3×400 V Weight: approx. 1500 kg Dimensions (L x W x H): 3150 x 1400 x 1750 mm Fpsdpfx Asytqnkjfpei

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE15 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. Similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-series L/min CE15-150 bar 40 15 hp water blaster unit 50Hz CE15-150 bar 40 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 35 15 hp water blaster unit 50Hz CE15-170 bar 42 15 hp water blaster unit 60Hz CE15-170 bar 35 15 hp water blaster unit 50Hz with start/stop CE15-170 bar 42 15 hp water blaster unit 60Hz with start/stop CE15-200 bar 30 15 hp water blaster unit 50Hz CE15-200 bar 36 15 hp water blaster unit 60Hz CE15-200 bar 30 15 hp water blaster unit 50Hz with start/stop CE15-200 bar 36 15 hp water blaster unit 60Hz with start/stop CE15-300 bar 18 15 hp water blaster unit 50Hz CE15-300 bar 22 15 hp water blaster unit 60Hz CE15-300 bar 18 15 hp water blaster unit 50Hz with start/stop CE15-300 bar 22 15 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Fpodpfehf Na Sox Afpei Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high-pressure cleaner. This model is the ideal tool for general cleaning tasks. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotary nozzles, chemical injectors, and a sandblasting kit. It is similar to, but not a Dynajet, Falch, Kärcher, Oertzen, etc. Fpsdpfxehf Na Io Afpji Available models: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7.5 kW (50Hz) / 9 kW (60Hz) Voltage: 400V (50Hz) - 440V (60Hz) Amps: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Fpedpfxeyq Irhj Afpoi Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6106

Condition: used, Year of construction: 2016, working width: 5 mm, Equipment: lighting, -40 hollow discs, diameter 510 mm / -Maintenance-free, large-dimension bearings / -Injector positioned 250 mm behind the first disc / -Hydraulic folding mechanism / -Hydraulic transport lock / -Very compact design / -Low Fjdpfx Afjy Dgp Hopspi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm • Minimum spacing 16 mm Fpedpjyk Empofx Afpoi • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: excellent (used), mileage: 7,99,500 km, power: 301 kW (409.25 HP), first registration: 09/1996, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 1996, Equipment: ABS, air conditioning, differential lock, parking heater, power mirror, = Additional Options and Accessories = - 430-litre diesel tank - Aluminium fuel tank - Heated mirrors - Driver’s comfort seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Tipping hydraulics - Air-suspended seats - Hub reduction - Radio/CD player - Sun visor - Auxiliary heater - PTO (Power Take-Off) - PTO (Power Take-Off) - ZF16 manual gearbox = Notes = NICE CONDITION HEAVY DUTY M.A.N. 26.403DFT SLEEPER CAB 6x4 TRACTOR UNIT, REDUCTION AXLES & ZF MANUAL GEARBOX, HYDRAULIC KIT & AIR CONDITIONING!! 400 HP, EURO 2, 6-CYLINDER ENGINE (NO ELECTRONICS, MECHANICAL PUMP & INJECTORS)!! ZF MANUAL GEARBOX!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! SLIDING FIFTH WHEEL!! AIR CONDITIONING!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US – WE ARE A ONE-STOP SHOP COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ENGEL TRUCKS: "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,816 cc Transmission Gearbox: ZF16 manual transmission, 16 gears, manual shift Fpedpfxeymqm Te Afpji Axle Configuration Tyre size: 315/80R22.5 Front axle: Max. axle load: 7,500 kg; Steering axle; Left tyre tread: 40%; Right tyre tread: 40%; Brakes: disc brakes; Suspension: leaf suspension Rear axle 1: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Reduction: outboard planetary axles; Brakes: drum brakes; Suspension: air suspension Rear axle 2: Twin tyres; Differential lock; Max. axle load: 13,000 kg; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20%; Reduction: outboard planetary axles; Brakes: drum brakes; Suspension: air suspension Weights Kerb weight: 9,000 kg Payload: 17,000 kg Gross vehicle weight: 26,000 kg Functional Load compartment capacity: 400 l Loading height: 130 cm Condition Technical condition: very good Optical condition: very good Further information Please contact Sales Department or Erik Engel for further details.

Condition: excellent (used), mileage: 9,99,990 km, first registration: 08/1997, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 620 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 13,000 kg, Year of construction: 1997, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and equipment = - 2 bunks - 600-liter diesel tank - Heated exterior mirrors - Comfort driver's seat - Roof spoiler - Speed limiter - Radio/CD player - Sleeper cab - Sun visor - ZF16 manual transmission = Notes = GOOD CONDITION DAF FT95-380XF SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX, ROOF SPOILER & AIR CONDITIONING!! 380HP, EURO 2 (MECHANICAL PUMP AND INJECTORS)!! ZF16 MANUAL GEARBOX!! 620-LITER DIESEL TANK!! AIR CONDITIONING!! SPOILER ON CABIN!! ETC!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR THE HEAVY JOBS!! Fpodpfx Afsx H Sr Sopoi MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) IN STOCK FOR SALE!!

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. Fedpfjtw S Awox Afpopi The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.