Automatic ELECTRONIC Drilling LINE CNC

BIESSE Techno FDT + SDT

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: Gisdjd Nviqepfx Ah Hjl VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum operating convenience. CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all standard cleaning granulates. Joint processing unit for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Double end trimming unit with automatic 0° / 3° swivel. Flush milling unit for flush trimming - 12mm. Fine radius milling - profile knives R2 - R5. Automated copying milling - corner rounding. Scraper unit - radius / bevel. Surface scraper unit. Sliding agent spray unit - PU. Cleaning set with fine polishing unit. Very stable workpiece support with roller conveyors - FRONT with scissor extension. Complete set of tools included. Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION. First commissioning in 2009, very few operating hours, approx. 1600. Machine from lease return / leasing option available. Godpsxy Iw Usfx Ah Heil Ex stock Lieboch.

Condition: excellent (used), Year of construction: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drill 3. MORBIDELLI - ZENITH F2 CDM through-feed drill 4. MAHROS - BRUSH SF unloading system Machine connected - works daily in one shift. The first drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs The second drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs rear horizontal heads - 6 pcs Below are details of the machine and a video The possibility of seeing the machine every day. Godpsgb D Afofx Ah Hjil Line availability August 2021

Condition: used, Year of construction: 2002, functionality: unexamined, machine/vehicle number: 27233, travel distance X-axis: 5,047 mm, travel distance Y-axis: 2,060 mm, travel distance Z-axis: 275 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 30 m/min, table width: 1,650 mm, table length: 4,500 mm, rotational speed (max.): 24,000 rpm, overall weight: 600 kg, For sale is a high-quality Biesse Rover 35 L, a powerful CNC machining center ideally suited for precise processing of wood, plastics, and composite materials. The machine stands out for its robust construction, high precision, and versatile application possibilities – perfect for medium-sized and industrial manufacturing operations. The Biesse Rover 35 L has not been used in the past 5 years due to an upgrade to a larger CNC machine. Gedpfx Ahjxpf Rwj Hoil The tools shown in the pictures are included in the sale price. Known defects: - C-axis defective - Safety mats defective - Vacuum suction cups should be replaced. Availability: immediately

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Biesse Rover K FT 2243 Machining Center The machine is equipped with one working area with two left-side origins, front and rear. Pneumatic stops WORKING UNIT: C-Axis electrospindle with 9.0 kW power BH10 boring head 1 circular saw blade, 120 mm diameter Automatic Loading and Unloading System (Sweeping Arm + Loading Suction Cups) Type A loading station – 3 reference columns Scissor lift Control system: BH660 fully PC-based Standard remote control panel Automatic lubrication system Vacuum system with zone clamping Electrical system Giodpfxex I Iu Ss Ah Hsl bSolid software 250 m³/h vacuum pump Working table dimensions FT: X 4298 mm; Y 2203 mm Available end of July 2026

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops Gsdpfx Aohvi Dujh Hjil The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: used, machine/vehicle number: 006158, Max. panel width: 1000 mm Gedpeiwptujfx Ah Hoil Max. panel length: 2500 mm No of injectors: 14 Positioning of Units by NC: yes

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Gedpfjidqf Rsx Ah Heil Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,315 mm, travel distance Z-axis: 150 mm, Equipment: chip conveyor, Number of milling spindles: 1 Main motor power kW: 10 kW Max rotation speed: 24,000 rpm Aggregate heads: 1 4th axis: C-axis Tool clamping system: HSK-F63 Tool change positions: 12 10-position disc changer: 1 Number of interchangeable heads: 2 Vertical drilling heads: 12 BIESSE drilling unit BH 19 L: 1 Horizontal drilling bits X: 4 Horizontal drilling bits Y: 2 Grooving saw blade in X Giedpox Ir Sujfx Ah Hsl Lock drilling group: Changeable aggregate Worktable: Console table Workpiece support aid: 1 Number of rails: 6 Positioning assistance: 1 LED number display on consoles: 1 Number of vacuum pumps: 1 Vacuum pump capacity: 90 m³/h Safety device: Safety mat Control: BIESSE XP 600

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Used Biesse Rover 35L CNC machining centre for woodworking, year 2001, in very good condition as shown in the photos. Machining range X 4500 mm, Y 1650 mm, Z 180 mm. Equipped with 10 HP air-cooled electrospindle, 21-position chain tool magazine, drilling head, pod & rail vacuum table and Becker VTLF 2.250 vacuum pump (2011). Machine details Brand / model: Biesse Rover 35L Year of construction: 2001 Type: CNC machining centre for routing, drilling and milling of panels and solid wood Condition: very good, complete, as in the photos Working range: X = 4,500 mm Y = 1,650 mm Z = 180 mm Composition / equipment 10 HP electrospindle, air cooling, ISO30 Chain tool magazine with 21 positions Pod & rail vacuum table with several vacuum pods ATS predisposition for vertical or horizontal pneumatic clamping (doors, frames, edges etc.) Drilling head (multi-spindle boring unit) Dust extraction hoods on the machining head Vacuum system Vacuum pump: Becker VTLF 2.250 Year: 2011 Capacity: approx. 250 m³/h Gsdpsx A Ap Rsfx Ah Hoil Power: 5.5 / 6.4 kW Max. vacuum: 200 mbar Technical data Approx. dimensions on site (L × W × H): 7,580 × 4,570 × 2,800 mm Approx. weight: 3,000 kg Other information Used machine in very good condition, ready for dismantling and loading More photos and video available on request Location: Lithuania, at our factory (ex-works) Availability: by agreement Price: on request