Used Kallfass Kw 5050 for sale (34,770)

Condition: good (used), Balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: KW, spring balancer type F2 with locking mechanism -Load: 98-176 N -Cable extension: 1.9 m -Quantity: 2x spring balance available Price: per piece Hedpeir E S Iofx Af Esfh -Dimensions: 225/125/H340 mm -Weight: 10.3 kg/pc.

Condition: good (used), Year of construction: 2009, operating hours: 4,500 h, I have 5 Kaeser HB 950 blowers for sale with 110 kW and 132 kW motors. Hjdsv Rmkxepfx Af Esfh

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Hedpfow Nykmjx Af Ejfh

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Hjdpfx Aexc Ni Ref Eofh

Year of construction: 1993, condition: used, Material: regular steel Hfjdegb D Hijpfx Af Eeh Driving force: 55 kW Dimensions: approx. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.5 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 1/min, stroke: 105mm

Year of construction: 1990, condition: used, Material: regular steel Driving force: 55 kW Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Hedpsgb D Irsfx Af Eofh Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm

Condition: used, Used stainless steel three decks tumbling screen by GKM Siebtechnik GmbH (Germany) model KTS 2000/3. Decks and contact parts are made of AISI 304 (1.4301) stainless steel. Upper deck cover is made of carbon steel. Machine has 3 levels of separation with an internal diameter of 1820 mm. Central top inlet and 4 side outlets. Machine is driven by electric motor with power 4 kW, 1460 rpm 230/400 volts, 50 Hz. Screen is mounted on carbon steel based. Specifications: Material of Construction: Stainless steel / carbon steel Number of Decks: 3 Hjdpfxszbuf Nj Af Eefh Diameter: 1820 mm Horse power: 4 kW

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump Hodpszdt E Ssfx Af Eofh -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 11 kW 1470 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 940/400/H425 mm Hfsdpfxezdt Efj Af Esh -Weight: 169 kg

Condition: good (used), Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans -Cooling capacity: 70 kW -Air flow rate: 39,673 m³/h Hodpfx Afsb Nx Hmj Esfh -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm -Housing: made of stainless steel -Drip tray -Number: 2x coolers available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece

Condition: excellent (used), Year of construction: 2018, electric motor, three-phase motor Hfedpszdq Tysfx Af Esh -Manufacturer: Weg, electric motor type W20-250S/M-04 -Power: 55 kW -Speed: 1485 rpm -Shaft: Ø 65 x 135 mm -Design: B3 -Protection rating: IP55 -Quantity: 1 electric motor available -Price: per piece -Dimensions: 920/920/H505 mm -Weight: 422 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Hsdpfx Aszdq R Eef Esfh -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 740 mm -Engine power: 7.5 kW / 2925 rpm Hfedpfx Aszdq Rlef Eeh -Volume flow rate: m³/min -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 740 x 40 mm -Dimensions: 600/1050/H1000 mm -Weight: 152 kg

Condition: excellent (used), Year of construction: 2021, DMU LASER TECH Fiber Laser Welder Like new - Year 2021 CE. Hjdpfxsv Amxme Af Ejfh 1 Kw MT 1000P Complete with cable and torch.

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer gearbox Bonfiglioli type: MVF49/F -Manufacturer Engine Fimet Type: MOF71A4 -Speed: 197 rpm -Power: 0.37 kW -Design: B5 angle -Shaft diameter: Ø 18 mm -Protection class: IP 44 -Number: 2x motors available Hfedpfeci Dk Usx Af Eeh -Price: per piece -Dimensions: 400/198/H200 mm -Weight: 16.3 kg

Condition: excellent (used), Year of construction: 2022, electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 315S/M-04 -Power: 132 kW Hjdpfx Aouhr R Tsf Eofh -Speed: 1488 rpm -Shaft: Ø 80 x 170 mm -Design: B3 -Protection class: IP 55 -Dimensions: 1280/640/H845 mm -Weight: 991 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, power supply unit, inverter, servo drive, drive controller -Manufacturer: KEB, Frequency converter Drive Controller Combivert Type: F4 -Part No.: 16 F4 C1G-M440/2 2 Hodpswcx Rmefx Af Esfh -Power: 23 kVA / 15 kW -Quantity: 1x frequency converter available -Price: per piece -Dimensions: 415/180/H335 mm -Weight: 14.9 kg/pc.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Hodpfszdny Rjx Af Eofh Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 4,700 kg, total width: 2,400 mm, total length: 6,100 mm, total height: 2,550 mm, type of input current: three-phase, input voltage: 400 V, warranty duration: 6 months, tank capacity: 800 l, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, hot water, type plate available, We offer a fully equipped, modular pellet boiler house with a 40 kW capacity, built in an ISO sea container and ready for immediate operation. The boiler house has been used as an exhibition sample and for demonstration purposes, and is therefore in very good technical and visual condition. The module is suitable for heating residential buildings, offices, workshops, warehouses, construction sites, agricultural facilities, and other buildings. It can be used as a permanent or temporary heating solution, as well as a backup boiler house for emergency situations. Included: * DEFRO pellet heating boiler with automatic pellet feeding * Nominal power: 40 kW * DEFRO storage tank – 800 l * Kospel hot water boiler – 140 l * Expansion tank * Circulation pumps * Automation and control system * Electrical distribution panel * Flue gas exhaust system * Natural ventilation * Gas extinguishing system for added safety Hjdpfxezdc Tgo Af Eofh Technical data: * Container dimensions: 6100 × 2400 × 2550 mm * Total weight: approximately 4700 kg * Power supply: 3N+PE 230/400 V * Frequency: 50 Hz * Power consumption: approximately 5 kW * CE compliance * TÜV NORD conformity assessment The current system configuration allows for increasing the heating capacity in the future, as the installed components are suitable for operation with a higher-capacity boiler. The boiler house is easily transportable and can be quickly installed on-site. Only the connections need to be prepared, and the system is ready to operate. The boiler house is equipped with an automatic gas fire extinguishing system, which provides additional protection for electrical and technological equipment. The system is in working order and ready for use. Upon agreement, it can be dismantled before sale, which would reduce the price accordingly. Available for inspection in Riga by prior arrangement.

Condition: used, Baumüller frequency inverter 55-88 kW, BUM63A-150- removed from Krauss Maffei KM 18 C3 - removed from running machine - fully functionalmanufacturer: Baumüller Nuremberg type: BUM63A-150 spare part no.: 6443081 manufacturer no.: 345449 Hfjdpfx Afeltrpzo Eeh Dition: gebraucht

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor Hfedjx Rw H Nepfx Af Eeh -Manufacturer: Chiaravalli, worm gear motor -Speed: 54 rpm -Transmission: Type CBFV040 i 25 -Engine: Type CHT 63C4 B14 0.22 kW -Protection class: IP 55 -Hollow shaft: Ø 18 x 78 mm -Quantity: 1x geared motor available -Price: per piece -Dimensions: 315/118/H155 mm -Weight: 7 kg/pc.

Condition: new, spindle mount: MK 4, total width: 1,020 mm, total length: 610 mm, total height: 2,450 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, clearance between the columns: 375 mm, mount diameter: 50 mm, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Hjdszdq Tmepfx Af Eefh Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 1997, condition: good (used), Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun, cooling unit -Individual components: see photos -Manufacturer: Deltatherm, Deltatherm Type: DE-HI Hfsdpfx Afozcwu No Eoh -Power: 1.7 kW -Dimensions: 1300/800/H1760 mm -Weight: 321 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan, fume extractor -Manufacturer: Exhausto Exodraft, smoke extractor Hedpfx Aozcvw Nsf Eefh Type: RS -Motor: 0.03 kW 1350 rpm -Inlet connection: Ø 280 mm -Dimensions: 360/360/H290 mm -Weight: 11.7 kg

Condition: used, New three-phase electric motor 37 kW three-phase motor SIEMENS Heavy-duty motor, electric motor, squirrel cage, asynchronous motor Type 1LE16032AA534GB4 Design V1 Frame size 200L Motor speed 2955 rpm Current draw 65 amps Motor power 37 kW Mains connection 400 Volt, 50 Hz Shaft diameter Ø 55 mm Hfodjyhq Awopfx Af Eeh Shaft projection length 110 mm Keyway width in shaft 16 mm Flange diameter 400 mm Centric diameter 300 mm Pitch circle diameter Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall housing length without shaft 640 mm Overall housing length with shaft 740 mm Required installation space (L x W x H) 740 x 400 x 520 mm Net weight 250 kg Excellent condition – new, unused from stock clearance