Used Kingsland 45 Xa Hydraulic for sale (22,468)

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Nwodey E T A Aspfx Akfof Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Nwsdpfx Akjyizxrjfef Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Nwjdpex A U Ncofx Akfsf Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 1977, centre height 450 mm centre distance 6150 mm spindle bore 140 mm turning diameter over bed 900 mm turning diameter over slide 660 mm Nsdoy Hl N Rjpfx Akfewf spindle drive 15 kW external dimensions Breite 1750mm length 9000 mm height 1650 mm weight 8000 kg spindle speed: 11-500 UpM With a chuck, collet, and faceplate

Condition: ready for operation (used), functionality: fully functional, center height: 700 mm, center width: 800 mm, spindle speed (max.): 240 rpm, bed width: 700 mm, overall weight: 10,000 kg, TECHNICAL DETAILS Njdpjy Hhitsfx Akfswf Swing diameter over bed: 1,400 mm Swing diameter over cross slide: 640 mm Centre height: 700 mm Distance between centres: 800 mm Bed width: 700 mm Spindle bore: 80 mm Spindle speed: 110 – 240 rpm MACHINE DETAILS Power: 11.5 kW Control: Conventional Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,500 x 2,500 mm Net weight: 10,000 kg EQUIPMENT Digital readout Quick-change toolholder

Condition: new, sheet length: 2600sheet thickness: 6upper roll diameter: 190Side Roll: 170prebending: 4motor: 3messurements (LxWxH): 4450 x 1080 x 1160weight approx.: 3350 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- Nwjdpfxsd Ab Tns Akfef - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: used, Machines for Export from Liquidation Stock No. 62506 = Double Mitre Saw RAPID Type DGL 5000 / 500 = Weight approx. 1,200 kg = Special price EUR 1,800 Stock No. 58052 = Eccentric Press MÜLLER GEFREES = Weight approx. 4,700 kg = Special price EUR 2,400 Stock No. 59408 = Eccentric Press Weingarten = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58984 = Eccentric Press Müller Gefrees = Weight approx. 1,400 kg = Special price EUR 1,000 Stock No. 58309 = Eccentric Press MÜLLER GEFREES = Weight approx. 1,000 kg = Special price EUR 1,000 Stock No. 60975 = Eccentric Press 16 tons (Year 2017) = Weight approx. 800 kg = Special price EUR 1,000 Stock No. 62267 (1) = Eccentric Press Weingarten 75 tons (Machine 1) = Weight approx. 4,800 kg Stock No. 62267 (2) = Eccentric Press Weingarten 75 tons (Machine 2) = Weight approx. 4,800 kg Stock No. 54183 = Hydraulic Press MÜLLER 10 tons, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = Hydraulic Press MÜLLER Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic Press – Hydraulic power unit standing alongside = Weight approx. 3,000 kg Stock No. 60507 = WEBO Drilling Machine with 4 heads = Weight approx. 1,900 kg = EUR 1,600 Nedpfoy Erzdsx Akfjwf Stock No. 57592 = ALZMETALL Drilling Machine with 2 heads = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = Column Drilling Machine WEBO MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = Radial Drilling Machine WEBO Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines for immediate export available. For example: 10 units welding equipment CLOOS, ESS, etc. 2x CNC lathe HITACHI SEIKI

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Nattheim Njdpfxsx It Auj Akfowf

Condition: new, bending length: 4100sheet thickness: 9upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls Njdpfx Aked Ab S Hofowf - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 10.250,00 We have many references!

Condition: excellent (used), Year of construction: 2009, 373 USED Flow pack packaging machine. EXTERNAL DIMENSIONS (in cm): Nwsdpfx Akjy E E Nujfof - height: 185, - width: 115, - length: 236, - tape width: 20. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, deck ovens, confectionery ovens, shop ovens, bakery machines, bread lines, roll lines, cake lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, croissant machines. We invite You to check all our ads.

Condition: new, Year of construction: 2026, machine/vehicle number: H4-400_1, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 300 mm, operating speed: 100 mm/s, reverse speed: 80 mm/s, table width: 4,100 mm, throat depth: 400 mm, clearance between the columns: 3,600 mm, oil tank capacity: 180 l, total length: 6,150 mm, total width: 2,700 mm, total height: 3,400 mm, overall weight: 23 kg, Equipment: CE marking, documentation/manual, safety light barrier, Cone H4-400 Hydraulic Press Brake - DA-66S CoastOne - Finland Technical Specifications Cone H4-400: Bending force: 400 tons Bending length: 4100 mm Cylinder spacing: 3600 mm Stroke: 300 mm Width: 500 mm Throat depth: 400 mm Table height: 985 mm Length: 6150 mm Width: 2700 mm Height: 3400 mm Approach speed: 100 mm/s Return speed: 80 mm/s Bending speed: 10 mm/s Oil tank: 400 l Weight: 22.5 tons Main motor: 30 kW Standard Equipment: - CNC-controlled X, R, Z1, and Z2 axes - 2 backgauge fingers - Delem DA-66S Graphical Control - CNC-controlled crowning device type 1 - AMADA Promecam tool holder - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front lighting Delem DA-66S Graphical Control: - 24-inch high-resolution touchscreen - 2D graphical programming interface - 3D machine visualization in simulation and production - Supports 3- to 8-axis control - Includes offline programming software Profile-T Lite – T2D - USB and peripheral interfaces - User-specific application support in the control's multitasking environment Nodpfx Akoy Efczofowf - Interface for sensor bending and automatic angle correction

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 05/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Nwedoyy Sh Hopfx Akfsf Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, 3-jaw wedge bar power chuck FORKARDT type HGF 160-45-3 HI GRIP Njdpfx Aksy Ehypofswf No. 109452 Diameter: 165 mm Internal diameter: 46 mm Cylindrical centering ring mounting: Ø 140 mm Max speed: 5,500 rpm - Wedge bar chuck with centrally adjustable clamping jaws - 1 set of stepped jaws, reversible for use as hard or soft jaws (can be reversed by 180°) - 3 mounting holes Ø 11 mm, bolt circle 105 mm Weight: 9.3 kg Very good, as-new condition

Condition: used, Year of construction: 1990, pressure 150 t distance between table / ram 660 mm Nwodpfx Akey Erv Iefef table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press - hole in table Ø 120 mm

Condition: new, Year of construction: 2026, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 47 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck 8-position turret head soft jaw kit Nwodpjf Ey Umjfx Akfof hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, functionality: fully functional, Year of construction: 2023, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Nwodpfxowuykxj Akfjf

Condition: used, Punching force: 300 kN Nedpfx Akoy Epkgjfjwf Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Support table Assortment of tools is included in the price

Condition: used, Year of construction: 2023, Dener XF 30125 - Hydraulic CNC Press Brake - Control unit (swiveling): ESA S640 CNC 15" 2D graphical display / touchscreen - CNC axes: Y1, Y2 and X - Motorized crowning system with CNC control - Hydraulic press brake valve with CE safety signals - MCS PLC safety control - Laser safety system - Backgauge X-axis: 500 mm (manually adjustable) - Upper tool clamping: L = 150 mm (Promecam) - Upper tool: Eurostamp 1260 / standard (835 & 805 mm, divided into 595 & 210 mm) - Lower die holder: standard width (Promecam) - Lower die: Eurostamp 2067 / standard (835 & 805 mm, divided into 100 mm left, 395 mm, 210 mm & 100 mm right) - 2 front supports, manually adjustable in height and lateral position - Power-on hours: 1184 h - Operating hours: 673 h - Year of manufacture: 2023 Nedpfxey A Rc Ue Akfowf Technical data: - Press force: 125 t - Bending length: 3020 mm - Distance between uprights: 3050 mm - Number of axes: 3 - Oil capacity: 200 l - Total power requirement: 11 kW - Dimensions (W x H x D): 3660 x 2500 x 1340 mm - Weight: approx. 7000 kg

Year of construction: 2006, condition: excellent (used), machine/vehicle number: FR.EAA0-00271, Pr. No.: 1224418281 Nwsdpfjhrnbcex Akfef

Condition: new, Year of construction: 2025, pressure 100 t stroke 380 mm Nwjdpfx Aexu Nv Iokfjf table surface area 1100x424 mm dayligth 180/750 mm distance between columns 1100 mm diameter of piston 90 mm

Condition: new, Year of construction: 2025, pressure 060 t stroke 350 mm table surface area 750x344 mm Nwsdpjxu Nvzefx Akfef dayligth 197/750 mm distance between columns 750 mm diameter of piston 75 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,311 kg, axle configuration: 3 axles, first registration: 03/2023, total length: 13,310 mm, total width: 2,490 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Nsdpfsy E Hwgox Akfewf Plastic toolbox with cover holder, sleeves and drawer behind the unit SCHMITZ black plastic fuel tank 245l 1 filling neck ; BIO-Diesel proof 385/65R22.5 13311 mm 2490 mm 2650 mm Pallet rack for 36 Euro/ 24 ISO pallets ROTOS SCB running gear (disc brakes) 1 insulated ventilation flap in the left hand rear door at the top

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,311 kg, axle configuration: 3 axles, first registration: 03/2023, total length: 13,310 mm, total width: 2,490 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit Nwedpfxey E Hwao Akfjf SCHMITZ black plastic fuel tank 245l 1 filling neck ; BIO-Diesel proof 385/65R22.5 13311 mm 2490 mm 2650 mm Pallet rack for 36 Euro/ 24 ISO pallets ROTOS SCB running gear (disc brakes) 1 insulated ventilation flap in the left hand rear door at the top

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,358 kg, axle configuration: 3 axles, first registration: 07/2022, total length: 13,550 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 45 SMART. CARRIER VECTOR 1550, with E-Motor and battery. Installation package for mono temp fridge,SKO. FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Nsdpoy E Hv Nofx Akfewf Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4009mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes).

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm total power requirement 37 kW weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm Nedpfx Aey Diahokfewf