Table router including feed

Kölle F 45

Condition: used, Year of construction: 1997, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Height display: digital Swivel angle display: digital Milling stop display: mechanical counter Spindle diameter: 30 mm Speeds: continuously variable Power consumption: 8 kW Motor brake: Yes, automatic Ijdsz A Eaiopfx Ahnetl Dust extraction connection: 2 x 120 mm Machine length: 1400 mm Machine width: 1400 mm Weight: 1100 kg

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded Itsdpfx Ajxabc Rjhnel construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence Iodpszt Ai Eefx Ahnstl with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: new, Technical data: Max saw diameter: 400 mm Min saw diameter: 250 mm Saw spindle diameter: 30 mm Scorer diameter: 120 mm Scorer spindle diameter: 20 mm Scorer on a separate engine Manual saw height adjustment Tilting saw at an angle from 0° to 45° Manual adjustment of the saw angle Carriage length: 3200 mm Carriage lock Work table: 1450 mm x 1030 mm Table height: 920 mm Table extensions 2 x Culaga Guard Safety switch Itedpfx Aev S Uz Iohnel Power supply: 380 V Main engine power: 7 kW Overall dimensions: Length: 3430 mm Width: 1900 mm Height: 1560mm

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Balz BG 90 with feed block conveyor Still in use today Min. log diameter: 140 mm Max. log diameter: 900 mm Shortest wood length: 2000 mm Feed speed: 10 or 16 m/min Itsdpsygli Nefx Ahnsl Rotor with 5 knives

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Itodpfexu Nc Isx Ahnjl Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Subject to price changes, errors, misprints and typographical mistakes excepted. Iodpjwzzh Eofx Ahnjtl

Condition: good (used), Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg Itsdpscl Svvefx Ahnol

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray / RAL5008 gray-blue Mach. No.: 52860/08 Milling head number: 7296/80 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis digital display Itodpfx Aomhfrrjhnjl FAGOR Innova 30i-M, new - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine corresponds technically to the state of the year of manufacture.

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table Itedpfx Ahjghtvaenel - Coolant pump in the machine base - Adjacent control cabinet Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition