Used Lugli 1997 Lugli 70Ce for sale (540)

Condition: used, functionality: limited functionality, Year of construction: 1997, operating hours: 4,180 h, load capacity: 2,700 kg, lifting height: 3,410 mm, fuel type: electric, mast type: duplex, construction height: 2,350 mm, battery voltage: 72 V, fork length: 100 mm, Equipment: cabin, pallet forks, sideshift, Brand: Nissan Model: RGM02L30U Capacity: 2700 kg Lifting height: 341 cm Overall height: 235 cm Drive: Electric Year of manufacture: 1997 Duplex mast Side shift Nsdpox Hyf Hjfx Ab Ujlg Operating hours: 4180 Fork length: 100 cm Voltage: 72 V THIS FORKLIFT IS SOLD WITHOUT CHARGING STATION

Condition: like new (used), Year of construction: 1997, functionality: fully functional, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, We offer this used Allen-Bradley SLC 500 control unit, manufactured in 1997. POWER SUPPLY INPUT MODULE Nsdpsyutfhofx Ab Ujlg OUTPUT MODULE Model number: 1746-P2 Series: C Input voltage: 85–132 V AC Input voltage: 170–265 V AC Frequency: 50/60 Hz Output current at 5 V DC: 5 A Output current at 24 V DC: 0.96 A Max. user current at 24 V DC: 0.2 A Replacement fuse: 250 V–3 A fuse Temperature code: T3C Class and division: I, Groups A, B, C, D, Division 2 Conductor insulation: copper, 75 °C Country of origin: Malaysia Year of manufacture: 1997 If you have any further questions or need more information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, mileage: 1,40,600 km, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, emission class: euro2, number of seats: 3, Year of construction: 1997, Equipment: crane, IVECO EUROCARGO 400E30 Nledpfx Abjzq D Svo Ujg 4x2 - Year 1997 DIESEL/ Euro 2 Mileage: 140,600 km Manual transmission/ Displacement: 9500 cc/ Power: 221 kW GVWR: 180 quintals Payload: 7,950 kg/ Wheelbase: 3,510 mm Accessories: - Differential lock - Air suspension Equipment: - TIPPING BODY, dimensions 4140x2550 mm - BONFIGLIOLI P15000/L 3SI crane * Radio

Year of construction: 1997, condition: used, Saw blade diameter: 450 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum quantity spray device Nledpfx Aohxzlbsb Ujg Table can be rotated on both sides with locking points at 45° Weight: approx. 650 kg Max. Saw blade diameter: 450 mm mass: about 700 kg

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic Nlodpfxjvt Dwbj Ab Ujg - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 Nsdsqcu Acopfx Ab Uelg 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, working width: 1,100 mm, We are offering this refurbished twin-belt calibrating machine SbF by ING STEFANI WK - 558, year of manufacture 1997, working width 110 cm. If you have any questions or require further information, please do not hesitate to send us a message or call us. Nlodpeyxn Dbjfx Ab Ujg

Condition: used, Year of construction: 1997, total width: 1,100 mm, total length: 1,350 mm, total height: 2,530 mm, Empty weight: 290 kg Nledpfox Ad E Hjx Ab Ujg - Year: 1997 - Documentation available: No - CE certificate present: No - Serial number: 450129 - Main motor power [kW]: 22 - Flow capacity [m³/h]: 13500 - Negative pressure [Pa]: 4100 - Connection diameter [mm]: 450 - Output diameter [mm]: 440 - Transport dimensions: 1350mm x 1100mm x 2530mm (l x w x h) - Transport weight [kg]: 290kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, functionality: fully functional, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 540 mm, quill travel distance: 130 mm, quill diameter: 80 mm, BRIDGEPORT ROMI POWERPATH 15 - Manufacturer: Bridgeport / Romi - Model: PowerPath 15 - Year: 1997 - Machine Type: CNC Turning Center - CNC Control: Fanuc Series 21i – To be confirmed - Number of Axes: 2 - Chuck Size: Approx. 203 mm / 8" - Swing Over Bed: Approx. 440 mm - Maximum Turning Diameter: Approx. 280 mm - Maximum Turning Length: Approx. 540 mm - X-Axis Travel: Approx. 185 mm Nledozvf Dwjpfx Ab Ueg - Z-Axis Travel: Approx. 540 mm - Spindle Bore: Approx. 66 mm - Bar Capacity: Approx. 51 mm - Spindle Nose: A2-6 - Spindle Speed: Up to 4,500 rpm - Spindle Speed Range 1: Approx. 15–1,500 rpm - Spindle Speed Range 2: Approx. 45–4,500 rpm - Spindle Motor Power: 15 HP / approx. 11.2 kW - Turret Capacity: 12 tools - Tailstock: Included / To be confirmed - Tailstock Quill Diameter: Approx. 80 mm - Tailstock Quill Travel: Approx. 130 mm - Chip Conveyor: Included

Condition: used, Year of construction: 1996, 4 buckle plates Knife folding unit Additional buckle plate Additional knife folding unit Nlsdpfx Aoz Dikhjb Ujg Shingle delivery Available immediately Machine type: Folder Year of construction: 1997

Condition: used, functionality: fully functional, Year of construction: 1997, operating hours: 3,282 h, load capacity: 1,600 kg, lifting height: 4,770 mm, free lift: 1,690 mm, fuel type: electric, mast type: triplex, battery capacity: 625 Ah, battery voltage: 48 V, empty load weight: 3,250 kg, Linde E16C. Year of manufacture: 1997. Hours recorded: 3282. Lifting height: 477 cm. Nljdpfx Abszp Si To Usg Transport height: 210 cm. Triple mast. Full free lift. Side shift. 48-volt battery with 380-volt charger. In good optical and technical condition! Video also available via WhatsApp. Calling or sending a WhatsApp message is faster. Price net + 21% VAT or net for export. We are open to your price offer! We speak Dutch. We speak German. We speak English.

Condition: excellent (used), Rondamat R 934, year 1997, in very good condition. Nledexiv S Eopfx Ab Uog

Condition: good (used), Year of construction: 1997, operating hours: 30,475 h, functionality: fully functional, machine/vehicle number: 8277, total height: 3,355 mm, total length: 6,200 mm, total width: 3,920 mm, input voltage: 400 V, type of input current: three-phase, UNISIGN CNC bed milling machine UNIVERS 5, year of manufacture 1997 Control system: Siemens 810 MGA 3 X-axis travel: 4000 mm Y-axis travel: 750 mm Z-axis travel: 400 mm Feed rate: 5 - 28,000 mm/min Rapid traverse rate X-axis: 28,000 mm/min Rapid traverse rate Y-axis: 28,000 mm/min Rapid traverse rate Z-axis: 28,000 mm/min 51 tool changer positions SK 40 DIN 69871 A / ISO 7388-1 T-slots 1 x 18H9 / 4 x 18H12 T-slot spacing: 130 mm Maximum table load: 1,000 kg 400V / 3 phases / 50Hz / 60A Power consumption: 40 kW Air pressure: 6 bar - 20 ltr/min Nedpfx Aboylbf Rs Uslg Number of leveling elements: 8 pieces Operating hours: 30,475 hours Dimensions: 6200 x 3920 x 3355 mm Weight: 12,000 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Nljdpfx Absz Aaude Uog Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Stroke: 230 mm Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm With pin table

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Nljdpfx Abszu Tu Io Ueg Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Condition: excellent (used), functionality: fully functional, mileage: 1,88,147 km, power: 125 kW (169.95 HP), first registration: 06/1997, fuel type: diesel, empty load weight: 8,430 kg, maximum load weight: 770 kg, overall weight: 9,200 kg, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, emission class: euro2, number of seats: 2, Year of construction: 1997, Equipment: air conditioning, Mercedes-Benz 917 / Ruthmann T180 Top • Manufacturer: Mercedes-Benz • Type: 917 • Mileage: 188,147 km • First registration: 06/04/1997 • Power: 125 kW / 169 hp • Transmission: Manual transmission • Wheel configuration: 4x2 • Air conditioning • Superstructure: Anton Ruthmann T 180 Top • Working height: 18.4 m Nsdezn N Anepfx Ab Uslg • 1 telescopic boom • 4-point hydraulic outriggers • Load capacity: 265 kg • Number of persons: 2 • Emission standard: Euro 2 • Unladen weight: 8,430 kg • Payload: 770 kg • Permissible total weight: 9,200 kg • German vehicle • German documents • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Nledpfxjub S R He Ab Ueg Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 1997, machine/vehicle number: 2629, functionality: fully functional, power: 33.5 kW (45.55 HP), Equipment: saw blade guard, COSMEC SM 400 Industrial Circular Saw For sale: COSMEC SM 400 heavy-duty industrial circular saw This COSMEC SM 400 is a robust industrial circular saw designed for professional timber processing. The machine comes from a professional sawmill and is known for its solid construction, reliability, and long service life. Technical Specifications Manufacturer: COSMEC Model: SM 400 Year of manufacture: 1997 Serial number: 2629 Saw blade diameter: 300–400 mm Maximum speed: 3,400 rpm Installed power: 33.5 kW Voltage: 380 V Frequency: 50 Hz Weight: 2,800 kg The machine is suitable for continuous industrial use and is built to deliver accurate and reliable performance under demanding working conditions. The sale includes additional saw blades and spare parts. Njdpfx Aszq Rmteb Uolg The machine can be inspected while running by appointment. Serious inquiries are welcome, and interested buyers are invited to submit a competitive offer.

Condition: used, Year of construction: 1997, Used Machine Year of Manufacture: 1997 Features and Technical Specifications: - Electrohydraulic drive - Vertical press cylinders: 3 - Stroke of vertical cylinders: approx. 130 mm Nsdpfjzk Nkdsx Ab Uolg - Vertical cylinders adjustable via a hole pattern - Horizontal press cylinders: 2 - Stroke of horizontal cylinders: approx. 130 mm - Horizontal pressing force: approx. 2,000 kp - Center pressure beam: 1 - Control: manual via hand lever - Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The information provided is subject to change until the machine arrives at our warehouse. Availability: immediately Location: Röllbach

Condition: as good as new (ex-display), Year of construction: 1997, machine/vehicle number: 1MB241H-6D-A111-A1, spindle speed (max.): 5,000 rpm, input voltage: 380 V, overall weight: 400 kg, power: 18 kW (24.47 HP), Spindle from Weiss GmbH, type 174405B, year of manufacture 1997. Unused, stock. For further details see type plate / pictures. Packaging and loading included. Nledpfx Abstq H Sue Ujg

Condition: good (used), Year of construction: 1998, Wittmann robot W 433 X - 500 Y - 1600 Z - 2500 Available: 2 units Nljdpfjzz Rwasx Ab Ujg Year of manufacture: 1997, 1998 Without electrical cabinet

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine COSTA 71 CTT 1350, year 1997. Configuration: 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately. Nodexlk Rbopfx Ab Uolg

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Nljdpfx Abovyrtds Ueg Capacity 7.50 bar Power 245 kW Voltage 500 V

Condition: used, mileage: 1,61,117 km, power: 200 kW (271.92 HP), first registration: 01/1997, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: mechanical, total width: 2,500 mm, total height: 3,750 mm, Mercedes-Benz 2527 suction excavator. RSP 6x4 Suspension: leaf-leaf Wheelbase: 4.30 m Reschwitz suction excavator Type: FM8SK-1500 Year 1997 6588 operating hours + remote control Equipment: - Engine brake - Speedometer disk - M.F.H. - Radio - Sunroof - Sun visor - Heated seats - Heated exterior mirrors - Electric window lift Nlodpfxeqf U Ufo Ab Ujg - Trailer coupling (ABS power connection) We are also happy to support you in the area of financing/leasing with our partners. All information without guarantee. Errors and omissions excepted.

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Nledpfszx Smqsx Ab Ueg Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request VAT: exclusive Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Price in €: on request