Used Mahros Brush for sale (1,629)

Condition: used, mileage: 24,678 km, power: 184 kW (250.17 HP), first registration: 10/2023, overall weight: 16,000 kg, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 09/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Steering arrangement RIGHT, ASR, BrakeMatic, single-tone horn, ESS, EBA, MAN Tronic, MAN Media Truck Radio with 7-inch color display, LGS IV, BT hands-free system, TBM3/RIO ready, dual engine configuration, side brooms left and right. High-pressure washer 100 bar with approximately 30 l/min, hand lance, spray bars on the sweeping material pick-up unit and cylindrical brushes. Bjdpfxot Hcdvs Af Aedh

Condition: used, mileage: 2,314 km, power: 118 kW (160.44 HP), first registration: 04/2025, fuel type: diesel, overall weight: 10,400 kg, next inspection (TÜV): 04/2027, gearing type: automatic, emission class: euro6, Equipment: air conditioning, navigation system, 50 km/h version: suspended and soundproofed driver's cab, air-suspended driver's seat, steering column adjustable in height and angle, window in the cab floor, 7" color display with multifunction indicator, reversing and suction mouth camera, 2x LED reversing lights. 80 km/h version, CD radio with Bluetooth and including TomTom navigation, pulled suction mouth in front of the front axle 400mm adjustable with the side brushes left and right, 3rd front brush, stainless steel container with integrated suction fan 4.3m³, high-pressure water system with lance, 4.8m suction hose on the sweepings container that can be rotated 360°. Fresh water tank 880l, sweepings container 930mm tipping height. Bjdpfxjwcikkj Af Asdh

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 1,000 kg, Equipment: CE marking, documentation/manual, For sale: Pilous ARG 290 CF-NC Automat automatic bandsaw Czech-made, fully automatic NC bandsaw for series cutting. The cutting length and piece count are programmed on the control panel; feeding, clamping, and cutting operate hydraulically in an automatic cycle. Stepless blade speed control is achieved via a frequency inverter. General Manufacturer: Pilous (TMJ), Czech Republic Model: ARG 290 CF-NC Automat Control: Unitronics Vision 230 Technical data Cutting capacity at 90°: round [290 mm], flat [approx. 290 x 290 mm] Miter cutting: [stepless 90°–45°] Blade size: [2,910 or 3,110] x 27 x 0.9 mm Blade speed: [15–90 m/min], stepless Main motor: [2.2 kW], 400 V / 50 Hz Length setting: NC-controlled, 0.1 mm accuracy, multiple feed for long pieces Hydraulic clamping, saw bow movement, and material feed Coolant system Weight: 1,000 kg Equipment Bodpfx Ajz H Nc Aef Asdh Blade cleaning brush Chip container Spare blade included

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L Bedpevu Hccjfx Af Ajdh

Condition: reconditioned (used), functionality: fully functional, overall weight: 2,200 kg, fuel type: diesel, maximum load weight: 500 kg, empty load weight: 1,380 kg, fuel: diesel, loading space volume: 0.6 m³, Year of construction: 2014, operating hours: 179 h, Equipment: all wheel drive, second-hand vehicle warranty, HAKO CITYMASTER 600 4x4 Multifunctional Municipal Street Sweeper (2014 Model) – Excellent Condition INSTALLED EQUIPMENT: Dual-brush sweeping system – New hard brushes with added wire bristles are ideal for removing dirt from public roads, parking lots, and pathways. Hydraulic controls inside the cab allow for working width adjustments between 1,380 mm and 1,800 mm, while the spray system binds loose dirt and prevents airborne dust. Multifunctional hopper – A versatile 600-liter capacity hopper made from a corrosion-resistant aluminum alloy (resistant to water and salt) suitable for various tasks, including collecting sweeping debris, grass clippings, or leaves. The hopper can be filled to its full capacity. Emptying is effortless thanks to hydraulic lifts that raise the unit and open the tailgate—a fully automated process. Manual suction hose – A Ø125 mm suction hose mounted on a movable boom functions like a vacuum cleaner, making it ideal for collecting leaves or smaller waste items such as packaging and bottles. Work and spot lighting – Full road lighting enabling travel on public roads, complemented by optional work-area lighting to improve working comfort during twilight or in conditions of poor visibility. Windshield wiper with washer, Bluetooth/USB radio, warning beacon, horn, operator seat with mechanical height adjustment TECHNICAL DATA: Model: Citymaster 600 Year of manufacture: 2014 Sweeping module operating hours: 57 h Total operating hours: 179 h Working width: 1380 mm – 1880 mm Debris hopper capacity: 600 l / 500 kg Fresh water tank capacity: 150 l Curb weight: 1380 kg Gross vehicle weight: 2200 kg DRIVE: Engine: Yanmar 3TNV88C-ZMHW – 1642 cc – Diesel Bodpfx Ajz Ia Ufsf Asdh Fuel tank (l): 41 Number of cylinders: 3 Power: 24.2 kW (32.91 hp) Engine speed: 2630 rpm (max) / 1900 rpm (Eco) Torque: 104.8 Nm Driving speed (forward/reverse): 25 km/h / 10 km/h Gradeability: 25% Hydraulic oil tank capacity: 35 l Hydraulic oil type: HVLP 46 DIMENSIONS: Length: 3899 mm Width: 1090 mm Width with brushes in transport position: 1380 mm Height: 2269 mm INCLUDED: Refurbished suction nozzle with new rubber skirts and a new suction hose leading to the hopper NEW 4m suction hose for the handheld vacuum (Ø125 mm) NEW side brushes (PPL 1.8 + wire bristles) (2x) NEW KENDA 23X8.5-12 10PR TL E K500 Super Turf tires (4x) NEW 12V 71Ah starter battery NEW air, fuel, and oil filters, plus an oil change service Windshield wiper and washer, Bluetooth/USB radio, warning beacon, horn, operator seat with mechanical height adjustment A full photo gallery is available upon request.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bsdpfx Ajvvi N Isf Aedh

Condition: used, Year of construction: 2019, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 150 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 460 kg dimensions of the machine ca. 1150 x 1970 mm Features: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIE) - With miter cuts from 45° right to 60° left * Mitre adjustment via a large turntable - MEP EVO microprocessor control for managing all functions * Front right, swiveling - Optional manual or automatic lowering of the saw frame * Stepless adjustment of the saw frame lowering - Saw blade guide made of carbide plates - Hydraulic saw blade tensioningâ??includes digital display - 2 saw blade speeds - Coolant system - 1 angle stop - Chip removal brush - Machine base frame with forklift pockets Bjdpfx Aezvhkmof Asdh - Operating instructions in German - Replacement saw bands Semi-automatic operation: - Electro-hydraulic clamping of the vise - Electro-hydraulic lowering of the saw frame - Electro-hydraulic lifting of the saw frame - Electro-hydraulic opening of the vise *Optional equipment: - 2000 mm feed roller conveyor - 2000 mm discharge roller conveyor, including stop

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 23200 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Bdsdpfowirkgsx Af Ajh Details:

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release Bdjdpfoxz Hhzex Af Aeh - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: used, sweeping width 800 tenb. container volume 114 l total power requirement 3,0 kW 2759 m²/h max. 5232 m²/h Sweeper - scrubber dryer Operating hours: approx. 400 hours incl. 4x brush + charger including new battery pack (consisting of 6x gel battery) !! Bjdpfxjg Ti Ihe Af Asdh

Condition: excellent (used), EDGE BANDING and CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Flexa 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Flexa 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Flexa 912: mm 100 /1350 (o 650+650) 238000A) “DOUCET” motorised roller conveyor for feeding panels to the “HOMAG” edge-bander 238000B) “HOMAG” edge-banding machine, Model KL 73/A3/S2 238000C) “DOUCET” motorised roller conveyor for feeding edged panels to “MORBIDELLI” Flexa 912 238000D) “MAHROS” 90° transfer unit (infeeding “MORBIDELLI” Flexa 912) Bdedszza Rvjpfx Af Ajh 238000E) "MORBIDELLI" Gantry (Portal) CNC (Drilling and Routering) Mod. Flexa 912 - N. 2 upper working head, EACH consisting of: - 1 type T35M drilling head with 35 vertical spindles (21 on the Y-axis + 14 on the X-axis) - 1 (movable) drilling head with 14 vertical spindles (on the Y-axis) for fittings - 2 heads with 2 horizontal spindles each (4 total) on the Y-axis - 1 HKS 63 vertical electric spindle (6.6 kW) - N.2 horizontal units (1 R + 1 L) EACH with 21 drilling spindle (21 + 21 = total 42) 238000F) “MAHROS” 90° transfer unit (outfeeding “MORBIDELLI” Flexa 912) 238000G) "RBO (BIESSE)" Stacker (Bridge Frame), double station Mod. Selecta SC

Condition: good (used), Front brush, front sweeper, sweeping roller, sweeping brush -Suitable for: Kramer Tremo, Multicar, Iseki, Hako and other tractors -was on duty: at Berlin Airport -PTO drive: -hydraulic: swiveling -Recording: Three-point -hydraulic: swiveling -Broom width: 2000 mm Bdjdpfx Ajb I Iifjf Ajh -Dimensions: 2100/1070/H1060 mm -Empty weight: 310 kg

Condition: used, Year of construction: 2001, Second-hand machine Year of manufacture: 2001 Features and technical specifications: Constant working height with combined unit with steel contact roller and electronic CPS articulated pressure beam with 25 mm pitch Sanding width 1100 mm Abrasive belt length 1900 mm Workpiece thickness min./max. 3–150 mm Feed speed: infinitely variable 2.5–13 m/min Grinding unit 11 kW Paint package: - infinitely variable belt drive speed via frequency converter - Belt blow-off device Bdodozk Nlbopfx Af Ash - Vacuum conveyor belt with blower Control system: - Terminal with 50 programme memory slots - simple menu control via plain-text display - visual display of the active elements in the processing line - Fully automatic PLC-controlled start-up sequence for all drives - digital time and attendance recording with cleaning brush Roller table at the inlet Roller table at the outlet Extraction capacity 1850 ³/h Extraction connections: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Compressed air connection 6–8 bar Air consumption 10 l/min Weight 2,200 kg Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Bdsdpfezzz Ivex Af Aoh Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6153102135, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102135, excellent condition, very little used, it is delivered with the roller from the pictures Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Bodpfx Asvyl Dvef Asdh Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 15.428 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), MAWEG SATURN DUO grinding machine - after the technical review - very good condition - belt length 1800 mm Bodpfx Afof N Nflj Aedh TECHNICAL SPECIFICATIONS: grinding width 200 mm grinding height 145 mm 2 x sanding aggregate with shoe 1 upper brush 1 lower brush shoe electric height adjustment feed speed from 4 - 16 m / min feed speed adjustable on the gear motor pneumatic oscillation blowing on the tape 2 x 4 kW main engines 0.55 kW feed motor connection diameter 4 x 80 mm dimensions (length / width / height) 190 x 110 x 210 cm weight ~ 1300 kg

Condition: used, Year of construction: 2010, operating hours: 1,00,000 h, functionality: fully functional, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 50,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 65,000 mm, total width: 2,700 mm, power: 365 kW (496.26 HP), input frequency: 50 Hz, input current: 930 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, complete lacquering line: 2x Costa K7 sanders (2010, 1st- 2x roller / 2x pads, 2nd- 2x brushing, 1x pad ) 1x Heesemann sander (LSM8 2006.12.161) 2x Wikoma hot air drying tunnel (2002) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRIM+TN 3500/HT / 2lamps UV 2000 M2+CRIM+TN 3500/HT / 1lamp UV 2000 M1+CRIM+TN 3000/HT / 3lamps UV 2000 M3+CRIM+TN 4000/HT) 2x stain roller coaters ( Smartcoater M) Bodpfx Ajv Tbgyef Ajdh 2x heavy putty roller coaters (Smartcoater SP1) 3x lacuer roller coaters (Smartcoater MF) 8x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: Bdjdpfx Afozt Nbzs Aeh - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1725 € 16 mm The extended entry level with added value in the set configuration for the most common work steps and applications. Consisting of: 8 screw clamps 180° HIS16Z3000 2 screw clamps 45° HIS16Z3045 2 V-support HIS16VP100 4 stop brackets 90x37, 5mm HIS16WA9037 6 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 2 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 20 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH Bdodpfx Afjyq Sqbj Aoh 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: new, neu ca. 2 Wochen ab Auftragse Bdodpfx Asyq Sumof Aeh 5442 € 105.03 € 28 mm Accessory set consisting of: 14 pcs. screw clamp180° HIS28Z3000 8 pcs. screw clamp45° HIS28Z3045 6 pcs. V-support HIS28VP100 30 pcs. quick clamping bolt shortHIS28SB100 6 pcs. connection bolt HIS28BS100 4 pcs. mangnetic bolt HIS28MB100 8 pcs. stop rail 150mm HIS28FA150 8 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 500mm HIS28FA500 6 pcs. stop angle 175mm HIS28WA175 1 pc. stop angle 325mm HIS28WA325L 1 pc. stop angle 325mm HIS28WA325R 1 pc. support angle 600mm HIS28W600L 1 pc. support angle 600mm HIS28W600R 1 pc. support angle 800mm HIS28W800L 1 pc. support angle 800mm HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH 1 pc. tool cart HIS28WW1000 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 250 mm capacity 90 degrees: square 250 x 250 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 260 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: * semi-automatic * semi-automatic dynamic * manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) * MEP Direct control technology * User interface with intuitive 10" touchscreen display * Mechanical buttons for saw operating functions * Guarantees reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Pivoting arm allows for convenient and safe operation * Display and logging of alarm and error messages * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic, and manual cycles * Miter cuts from 45° right to 60° left - Selectable manual or semi-automatic dynamic cycle * For performing cuts without programming - Protective enclosure for operator safety - Infinitely variable cutting speed regulation from 15 to 100 m/min * Via frequency inverter - Latest-generation hydraulic power unit * High performance with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposed ball bearings * Repeatable 600 mm single stroke for cutting any length - Saw head positioning and feeder movement via joystick - Automatic detection of the initial cut position - Manual band tension monitoring with display readout * Via electronic transducer Bsdpfx Afsz Albis Aedh - Automatic cutting load monitoring * Via a servo valve mounted directly on the cylinder - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = +/- 0.1 mm per feed stroke Manufacturer information – please note: If this saw is installed on a mains circuit equipped with a residual current device (RCD), the RCD must be universal-current sensitive (Type B) and rated at no less than 300 mA.

Year of construction: 2019, condition: ready for operation (used), overall weight: 3,500 kg, total width: 2,850 mm, total height: 2,220 mm, product length (max.): 2,000 mm, Metal Band Saw manufactured in 2019. This Behringer HBE 511 A features a cutting capacity of up to 510 mm for round and flat materials. It includes a single feed stroke of 650 mm and operates with a band speed of 15–150 m/min. The machine is equipped with a servo-controlled saw frame feed and hydraulic clamping vice. If you are looking to get high-quality cutting capabilities, consider the Behringer HBE 511 A machine we have for sale. Contact us for more information. • Cutting capacity at 90°: • Round: up to 510 mm diameter • Flat: up to 510 × 510 mm • Minimum material size: • Round: 10 mm diameter • Flat: 10 × 8 mm • Material feed: • Single feed stroke: 650 mm • Minimum remnant length (automatic): 80 mm • Material feed via ball screw • Band speed: 15–150 m/min • Main saw motor power: 5.2 kW • Total connected load: 6.5 kW • Material support height: 800 mm • Saw blade dimensions: 5,730 × 41 × 1.3 mm • Features: • Servo-controlled saw frame feed via ball screw • Hydraulic clamping vice • Electrically driven chip-removal brush for saw blade cleaning Bdjdpfxsz Dg Dlo Af Ajh Additional equipment • Infeed roller conveyor • Outfeed roller conveyor

Condition: excellent (used), Year of construction: 2011, cutting diameter 400 mm capacity 90 degrees: flat 500 x 400 mm saw band length 6220 x 41 x 1.3 mm speed 15.0 - 150 m/min work height max. 750 mm workpiece weight ca. 250 - 300 kg/m Control MEBA NC coolant tank capacity 80.0 ltr. oil volume 30.0 ltr. power capacity 5.5 kW weight of the machine ca. ca. 2250 kg range L-W-H 3100 x 1620 x 2150 mm Bjdpez Dkzusfx Af Asdh Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic "two-column linear guide system" * Fully automatic machine for 90° cuts only - User-friendly NC dialog control * With plain-text display 5.7-inch CE panel * Program memory with 50 programs, each with 20 steps - Automatic material feed * Minimum cutting diameter .. Ø 5.0 mm * Residual piece length without bundle clamping .. manual 25.0 mm * Residual piece length without bundle clamping .. automatic 110 mm * Automatic movement of the clamping blocks - Rapid-feed lowering of the saw frame * With automatic material detection - Band saw speed via frequency-controlled AC drive (15-150 m/min) - Automatic cutting pressure and feed monitoring - Driven chip-clearing brush via friction wheel - Hydraulic full-stroke material clamping - Saw blade angled 3° relative to the material support surface - Saw blade idler rollers with carbide guides - Manual saw blade tensioning - Removable coolant tank for easy cleaning - Operating instructions

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter Bsdpfx Ajwyda Uef Ajdh pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: new, Year of construction: 2026, Condition: New Machine type: Twin-column bandsaw fully automatic Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (rectangular): 325 x 380 mm Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Cutting speed: 15 - 100 m/min (stepless) Main drive motor power: 3.7 kW Table height: 800 mm Coolant capacity: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC Automatic Single cut length: 0-403 mm Bdedpfxeyc Hd Tj Af Ajh Multiple cut length: 0-9,999 mm Residual piece: 50 mm Weight: approx. 1,950 kg Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard Equipment: - Touchscreen control - Stepless cutting speed adjustment (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic kerf compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide blade guide - Hydraulic chip conveyor - Vibration damper - Manual in English - Machine feet - CE Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor