Used Mvd I-Bend D for sale (76,686)

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please provide your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs made of painted square steel profiles Fpjdpfxjftb Ebo Adrsk - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hoods, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry. Below, you can select the cyclone with the appropriate size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Year of construction: 2020, condition: refurbished (used), Paint booth on wheels Ready for connection, 230 V Fpsdpfx Adjfuhu Ajrsk Motor power: 1.1 kW Airflow rate: 2,500 m³/h Dimensions: 1200 x 1200 mm (W x H) Hose connection at the rear underside: 250 mm Double filtration system: paper filter and paint stop filter mat Spray booth, paint booth, paint mist extraction, dry spray wall, spray wall, paint wall.

Year of construction: 2018, condition: new, TECHNICAL CHARACTERISTICS • Punching capacity: 600KN / 60Tn • Punching: Ø40x11mm • Strokes per minute (15mm travel): 32 • Throat deep: 500mm • L angle at 90⁰: 120x120x10mm • Flat bars: 350x15mm Fpjdpfodx Rd Sjx Adrjk • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 100x42x10mm • Bending station: 150x10mm • Motor: 5.5KW • Net weight: 2012Kg

Year of construction: 2018, condition: new, TECHNICAL CHARACTERISTICS Fodpfx Asdx Rd Ujdrspk • Punching capacity: 500KN / 50Tn • Punching: Ø31x12mm • Strokes per minute (15mm travel): 34 • Throat deep: 177mm • Stroke: 50mm • L angle at 90⁰: 80x80x8mm • Flat bars: 350x10mm • Round bars: Ø35mm • Square bars: 30mm • Triangular notching: 90x42x10mm • Bending station: 100x10mm • Motor: 3KW • Net weight: 950Kg

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2014, total width: 2,470 mm, suspension: air, tire size: 385/55-R22.5, color: black, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = Nice 2014 D-TEC FLEXITRAILER 45FT HC chassis, BPW axles with drum brakes, ABS/EBS, 1st axle = lift axle, 3x extendable (front, middle and rear), 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC, unladen weight: 4,962 kg, permissible total weight: 43,000 kg, 385/55-R22.5 tires (R: 6/6/5mm; L: 5/6/5mm)), Dutch registration with valid technical inspection until 25-09-2026 = Further Information = Axle configuration Tire size: 385/55-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 35% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 35%; Tire tread right: 35% Weights Unladen weight: 4,962 kg Payload: 38,038 kg GVW: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable body: Yes Maintenance, History and Condition APK (Technical Inspection): valid until 09.2026 Technical condition: very good Optical condition: very good Identification License plate: ON-18-JZ Fsdpfxozinmzs Adrspk Further Information Please contact Arne Honingh for further information.

Condition: new, Year of construction: 2026, BIEGEMASTER double bender - Model XBend 6.1,25 Effective length: 6400 mm Bending capacity Steel 400 N/mm²: 1.25 mm V2A 600 N/mm²: 1.00 mm Aluminum 190 N/mm²: 2.00 mm Clamping capacity (closed seam): 0.5 mm steel Number of uprights: 4 pieces Driven upper bending joints: 4 pieces Driven bending joints bottom: 4 pieces Fsdpfxevhc Dpj Adrjpk Incl. touchscreen CNC control with automatic depth stop Incl. electric shears BIEGEMASTER Up- and Down- Bending machine - model XBend 6.1,25 Working length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm stainless steel 600 N/mm²: 1.00 mm aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Stands + Tension Arms: 4 pcs. Driven linkage joints upper beam: 4 pcs. Driven linkage joints down beam: 4 pcs. Incl. touchscreen control and automatic back-gauge Incl. electric cutter

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2014, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, color: black, Year of construction: 2014, Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.962 kg Carrying capacity: 38.038 kg GVW: 43.000 kg Maintenance APK (MOT): tested until 10/2026 Condition Technical condition: good Visual appearance: good Damages: none Identification Registration number: ON-83-LL Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS Fsdszhwciopfx Adropk - Extandable - Lift axle - Twist-locks = Remarks = D-TEC Flexitrailer 2014 3x uitschuifbaar: voor, midden en achter

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2015, total width: 2,470 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2015, Axle configuration Tyre size: 385/65R22.5 Make axles: SAF Fjdpfx Adjzhuxbsrepk Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.765 kg Carrying capacity: 38.235 kg GVW: 43.000 kg Maintenance, history and condition APK (MOT): tested until 05/2027 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks = Remarks = D-TEC Flexitrailer 2015 3x extendable: front, middle and back

Condition: used, axle configuration: 3 axles, first registration: 08/2015, color: other, Year of construction: 2015, Empty weight: 3.800 kg Fpjdpfxjzhv D So Adrek Axle 1: left 12 mm right 12mm Axle 2: left 12 mm right 12 mm Axle 3: left 12 mm right 8 mm We have the possibility to stack trailers!

Year of construction: 2025, condition: refurbished (used), Complete automatic Stirrup bender PRIMA 12, manufactured by SCHNELL (Italy) Full revamped “as new”, Up to 12 mm SCOPE OF SUPPLY Two pay-offs for wire coils. - Composed by basement & coil support. - Coils weight max. 3.800 Kg coils. - With automatic pneumatic brake controlled from the computer of the line. Rebar straightening & cutting machine Schnell PRIMA 12 - Straightening devices with mechanical setups and separate adjustment for each strand. - Serial interface to Minicontrol type computer. TECHNICAL SPECIFICATIONS Revamping year: 2025 Original manufacturing year: 2005 Wire diameter: - Single strand up to: 4 – 12 mm - Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Working pressure: 7 bar Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Dimensions: 3530 x 1330 x 2180 mm Weight (approx.): 2300 Kg Original manufacturing year: 2005 Revamping year: 2025 Wire diameter Single strand up to: 4 – 12 mm Wire diameter Double strand up to: 4 – 10 mm Max pulling speed: 120 m/min Central mandrels Ø: 20 – 50 mm Max bending angle: 180° Max Bending speed: 1650° / sec Average power consumption (400 V/50 Hz; 480V/60 Hz): 2 kW/h Fjdpsvtp Rmsfx Adropk Working pressure: 7 bar Weight (approx.): 2300 Kg Dimensions (approx.): 3530x1330x2180 mm

Condition: used, functionality: fully functional, power: 60 kW (81.58 HP), fuel type: electric, operation weight: 500 kg, maximum load weight: 500 kg, Year of construction: 2020, operating hours: 400 h, machine/vehicle number: 2020-2704-0001, Vacuum-Controlled Plasma Nitriding Furnace Fpsdpexz Divofx Adrok

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Capacity: 15-100 kg/h Year of manufacture: 1998-2006, multiple units available Please arrange an inspection by phone. We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical errors or data transmission errors. We will, of course, take care of all formalities. Fodpfxjh Ibgpe Adrspk Loading possible.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, suspension: air, tire size: 385/55R22.5, wheelbase: 8,810 mm, color: blue, Year of construction: 2015, Axle configuration Tyre size: 385/55R22.5 Make axles: Valx Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.800 kg Carrying capacity: 37.200 kg GVW: 41.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: ON-64-VV Additional information Please contact Arie or Pedro for more information Fpodszf Ic Uspfx Adrjk = Additional options and accessories = - Air suspension - EBS - Twist-locks = Remarks = 45 FT Only. Empty Weight: 3.800 KG!

Condition: new, Year of construction: 2026, neu 2026 090209 prompt, Zwischenverkauf v Italien 7780 € 150.15 € 1 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm 42 x 4 mm 42 x 2 mm 42 x 2 mm 50 x 3 mm 54 x 2 mm 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): Fodpfjwirzfsx Adropk MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: used, axle configuration: 3 axles, first registration: 08/2006, color: other, Year of construction: 2006, Empty weight: 5.600 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Fedjw Rn Hfopfx Adropk Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 10/2017, color: other, Year of construction: 2017, Empty weight: 6.250 kg Fedpfswzx Ipjx Adrepk Axle 1: left 8 mm right 8 mm Axle 2: left14 mm right 14 mm Axle 3: left 14 mm right 11 mm

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery Fpjdjwhcfxepfx Adrek

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks Fjdpfjyq Ufujx Adrepk * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator Fpedpfsyq Ufzox Adrsk * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,480 mm, loading space height: 2,303 mm, Year of construction: 2026, Equipment: ABS, Brand new D-Tec Flexliner Aluminium Tipper 57m³ with 3 Axles D-TEC Flexliner FL-3-S Aluminium * 3 axles * SAF axles * Disc brakes * Air suspension * Automatic lift axle * Wabco EBS * 57 m³ capacity * Aluminium load body * 7 mm wear-resistant aluminium floor * Internal dimensions approx. 10,300 x 2,480 x 2,303 mm * Tipping angle approx. 45–46° * Black sliding tarpaulin * Pneumatically locked combination rear door * 2 rear slides * LED lighting * LED work lamps * Toolbox * Load pressure gauge * Tyre pressure monitoring system (TPMS) * Broom/shovel holder * Access ladder * Steel rims * Tyres 385/65 R22.5 * Body colour: RAL 7001 silver grey Fsdpfey Nuqiex Adrspk * Frame RAL 7016 anthracite grey * Available at short notice * Errors and prior sale excepted We are always at your disposal for any questions.

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm Fpjdpfoyhi Huox Adrek * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector Fjdpfxeyq Ufnj Adrepk * Flashing side marker lights * Multi-chamber tail lights

Condition: used, maximum load weight: 38,274 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 11/2012, next inspection (TÜV): 04/2027, total width: 2,550 mm, Year of construction: 2012, Additional information: * Type | First axle: Goodyear R * Tire size | First axle: 385/55 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Goodyear R * Type | Third axle: Goodyear R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth inner left | Second axle: 40% Fodpfxozdm Igo Adrepk * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Drum brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Drum brakes * Brake type | Third axle: Drum brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Homepage * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors. The stated prices do not include BPM and are only valid for export.

Condition: new, flat steel 350 x 15 mm round bar steel 35 mm square edge steel 30 mm L-beam 80x80x8 mm hole diameter in sheet thickness Ø 27 in 13 / Ø 20 in 18 mm blade length 356 mm engine output 3.0 kW Stroke rate 34 Punching capacity max. 500 kN weight 950 kg dimensions 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) Fpodpjyv Nafefx Adrek

Condition: excellent (used), Year of construction: 2002, Weishaupt gas burner G7/1-D, with gas line Dungs DN 50 Design: ZMD-LN Fjdsy Uvt Njpfx Adrspk Output: 250-1550 kW Connection pressure: 15-500 mbar Year of manufacture: 2002