Used Renner Reko 700D/90 for sale (10,756)

Condition: used, Year of construction: 2008, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain output 22 kVA weight ca. 5.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kjdpfxey Ty Ize Algjlt Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2000, workpiece weight per basket 250 kg Kledpfx Asy Ty Dielgjt basket dimensions max. mm voltage pneumatisch weight of the machine ca. 400 kg dimensions of the machine ca. 1,35 x 1,50 x 2,35 m

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): Kljdpfxod N Dnhe Algjt - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.

Condition: good (used), Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 90 mm -Transport width: 630 mm Kledpfx Asy Tvcnjlgst -Photographs: 15/12 mm see photos -Quantity: 147 pieces available -Price: per piece -Dimensions: Ø 90 x 655 mm -Weight: 6.9 kg/pc.

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Kledpfxey Tig Hs Algst Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Year of construction: 2011, overall dimensions 135x89 mm; Kljdpfx Aloy Txnajgjt power supply 230 V,50/60 Hz, 0,5 A; Compressed air supply 6 bar; Calibres 25-85; Clipps E200-243; weight 100 kg.

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Kodpfx Aley Th Enjgjlt Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Year of construction: 2015, machine/vehicle number: 29156, 27781, Decoiler Coil weight: 2 x 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1800 mm Expansion range: 460 - 525 mm Leveller / Straightener Material width : 30 - 500 mm Number of levelling rolls: 11 pcs. Diameter of the levelling rolls: 90 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 90 mm Number of pinch rolls: 2 pcs. Diameter of pinch rolls: 90 mm Material thickness: 0,8 - 8,0 mm Feeding speed: 3 - 30 m / min Standard configuration Year of manufacture of the decoiler 2015The straightening machine was delivered in 2009 and adapted to the decoiler in 2016 Kjdpfsvg Iqxox Algjlt Extended machine accessories Insertion aidLoop bridge

Condition: used, High-voltage tester, high-voltage testing device, high-voltage tester for HV, PE, IS measurement Testing console, testing station, measuring station, testing device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The PE/IS/HV / 91-3J.3 device is used to measure voltage strength, insulation resistance, and the voltage drop of the protective conductor in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The SHV 16 / 90-1V.3 device provides a highly stable DC voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground potential and can be set to a maximum of 300 V. Serial No.: Year of manufacture 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Klodpfx Aljd Dc Unegjt Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact, on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices are available under storage numbers 57820 and 57821.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Grundfos, Multi-stage submersible centrifugal pump -Type: MTH2-90/7 AWA-AUUV -Drive: 1.1 kW 2850 rpm -Max. flow rate: 2.5 m³/h -Max. delivery head: 64.6 m -Immersion depth: 250 mm -Dimensions: 230/180/H490 mm -Weight: 13.9 kg Kedpfxoy Ti I Ro Algolt

Condition: good (used), Year of construction: 2013, Hazardous materials container, REI 90 / F 90 fire protection storage type WFP, cantilever racks, internal lighting, loading ramp, leakage sensor – used - : Price ex location: €29,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Model: REI 90 / F 90 Fire Protection Storage WFP-X 14 Room system surface finish External coating: RAL 9002 grey white Internal coating: RAL 9002 grey white Door coating (both sides): RAL 9002 grey white Dimensions (mm) Internal | External (without attachments) Width: 2,560 | 2,952 Depth: 5,500 | 5,938 Height: 2,500 | 2,924 Sump capacity Steel sump: 1,560 litres Door placement: short side Stainless steel door handle with anti-panic function: 1 pc Technical ventilation fire protection system: 1 pc Exhaust air monitoring: 1 pc Door holding device single-leaf door: 1 pc Loading grate for pallet truck, WFP 14: 1 pc Cantilever racks: 8 pcs Ex-proof internal LED lighting 42 watts: 1 pc Steel loading ramp suitable for pallet truck: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1-3) as well as flammable, toxic, and oxidizing substances according to GHS • Roof and sidewalls made of fire-resistant cladding (EI120) with fire protection from both inside and outside. Floor fire protection via suitable substructure on-site • Roof drainage via integrated gutter with internal downpipes at each short side • Manufactured to DIN EN 1090-2 • Flexible indoor or outdoor installation on a concrete surface • Frame structure designed to meet static requirements • Constructive potential equalization by grounding the steel frame structure • Hot-dip galvanized steel sump made from S235JR (material no. 1.0038) to DIN EN 10025, 5 mm material thickness, corrosion protection for at least 5 years • Leak tightness test of the sump according to EN ISO 3452-1 with factory certificate • No ground clearance. Not suitable for underpassing by industrial trucks • Front lugs for securing the room system to the concrete base • Corrosivity class C3-M according to DIN EN 12944, part 1 • Single-color 2K PUR coating in RAL color tone Klodpsyzc Dhefx Algot • Self-closing fire protection door with overhead door closer and anti-panic lever set, lockable by cylinder lock with Euro profile 17mm • Convenient access thanks to low door threshold of 147 mm • Storage area with hot-dip galvanized, removable grating supports • Demountable transport brackets on the roof section II 2(1) Ex emb[ia] IIC T6) Cantilever racks Internal lighting Loading ramp Leakage sensor SpillGuard Connect Original price: €49,000 Condition: good – very good. No spills; only closed containers were stored inside. Availability: immediately Location: 79312 Emmendingen, Germany Detailed offer data available as PDF on request.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Ksdpfouzn Nnjx Algslt Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Three-phase motor, electric motor Kledpey S Rl Isfx Algst -Manufacturer: Kracht, electric motor type MD 90-75 -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 16 x 18 mm -Dimensions: 305/230/H190 mm -Weight: 15.3 kg

Condition: new, sheet width 1050 mm plate thickness 3,3 mm pre-bending 3,0 mm roll diameter 90 mm min. dia. 130 mm total power requirement 1,1 kw weight of the machine ca. 570 kg dimensions of the machine ca. 2100 x 800 x 1130 mm Domestic equipments: - Asymmetrical 3-roll round bending machine with motor drive - Upper roller swung out - Conical bending device - Main engine with brake device Additional equipment: Kjdpfeyv Nfbsx Algolt - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: used, Cutting height max. ca. 100 mm Chain width 300 mm Klsdpow Ng T Ujfx Algjt Motor output 45 kW

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle) Kedpfxjfh Tmmj Algslt

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Klsdpfjd E Ixzox Algst Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1991, pressure 40 t distance between columns 930 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 665 mm ram surface 900 x 1200 mm side window 700 mm max. tool weight 7,0 t max. capacity of swivelling ram plate 3,5 t Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Working speed 0 - 10 mm/s oil volume 140 l power requirement 9,5 kW Klodpfxjvuul Ss Algst weight 7,0 t dimensions (WxDxH) 2,1 x 3,6 x 3,6 m with swivelling ram, movable table

Condition: like new (used), Year of construction: 2016, power: 200 kW (271.92 HP), overall weight: 7,500 kg, MEBOR multilame saw, year of manufacture 2016. In very good working condition! Almost like new. Klodpfx Aljy Sganegst

Condition: excellent (used), Year of construction: 2015, LAUDA Integral XT 1590 WS Manufacturer: LAUDA Dr. R. Wobser GmbH & Co. KG Klodpfx Aljy Rmimjget Model: Integral XT 1590 WS Order No.: LWP 551 Serial No.: LWP551-15-0010 Year of manufacture: approx. 2015 (derived from serial number) Design: Process thermostat / circulating chiller For sale is a used LAUDA Integral XT 1590 WS temperature control and cooling system for industrial applications in laboratory, research, chemical, pharmaceutical, and production environments. The unit is suitable for precise temperature regulation of external circuits, reactors, test benches, and process plants. Technical data as per nameplate: Voltage: 400 V / 3~ / PE / 50 Hz Power consumption: 13.8 kW Heating capacity: 8.0 kW Protection class: IP21C Refrigerant Circuit I: Refrigerant: R404A Filling quantity: 3.5 kg Refrigerant Circuit II: Refrigerant: R508A Filling quantity: 1.75 kg Technical data as per manufacturer: Operating temperature range: approx. -90 °C to +200 °C Cooling capacity: up to approx. 15 kW at +20 °C Max. pump pressure: approx. 2.9 bar Max. pump capacity: approx. 45 l/min Filling volume: approx. 10.5 – 17.4 liters Features: - LAUDA Command control system - Digital temperature regulation - Graphic display / LCD - RS232 / RS485 interface - Variable pump - Magnetically coupled pump - Connections for external temperature control circuits - Mobile floor-standing unit - Industrial-grade design Condition: Used device with age- and usage-related signs of wear. Visual condition as per photos. A full technical inspection under process conditions has not been performed. Scope of delivery: LAUDA Integral XT 1590 WS with control unit Scope of delivery as shown Dimensions & weight: Dimensions as per manufacturer: approx. 700 x 550 x 1600 mm (W x D x H) Weight as per manufacturer: approx. 280 kg Notes: Inspection possible by appointment. Loading and collection possible by prior arrangement. Commissioning, maintenance, and installation may only be carried out by qualified personnel. Commercial sale – sold without warranty. Subject to change and error.

Condition: good (used), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1 is 150 mm Swing steady 2 is 350 mm Swing steady 3 is 500 mm 3 units suitable for TPK 90 (or with spacers TPK 110) Spacers are not included 2nd tool post to be mounted on slide Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length Kljdpfx Alswrrbksgst 1200 mm Width 800 mm Height 1000 mm Weight 1800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: new, Type: MZ73031A Number of spindles 3 Distance between first and last spindle 50 mm Adjustable drilling speed Height of the working table 820 mm Table dimensions 735×440 mm Kljdjd R Rt Sopfx Algst Number of clamps 2 Motor power 1,5 kW 400 V Motor r.p.m. 2800 r.p.m Working air pressure 6-8 bar Weight 75 kg Transporting dimensions 900x700x1500 mm

Condition: new, Type: BM21S Number of spindles 21 Adjustable drilling angle Working width 700 mm Table dimensions 1000×900 mm Additional support fence 3000 mm Number of clamps 2 Motor power 1,5 kW 380 V 50 Hz Working air pressure 8 bar Drilling step 32 mm Kjdpfx Asfbubuolgelt Weight 150 kg Transporting dimensions 1200x1000x1300 mm

Condition: used, Year of construction: 2012, 90 running meters of Ramada pallet racking Used goods, very good condition, see pictures Height 4.6 m Depth 110 cm Beam length 2.7 m Load per compartment 3000 kg Frame blue Carrier orange Year of construction 2012 Negotiated price: € 8.150,-- net ex stock Offer consists of: + 33 pre-assembled frames, depth 110 cm, height 4.6 m +192 beams, second-hand, length 2.7 m, 3000 kg load per compartment +384 pcs. safety catches +132 concrete anchors Load plates Goods are in stock. Transportation and assembly possible on request. Kledpfx Aetql H Rslgot Inspection possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,103 kg, number of axes: 6, This 6-axis KUKA KR 90 R3100 extra C-F-HP was manufactured in 2016, featuring a load capacity of 90 kg and a reach of 3100 mm. It includes the KRC 4 controller, enhancing its operational flexibility. Consider the opportunity to buy this KUKA KR 90 R3100 extra C-F-HP robot arm. Contact us for more information about this machine. Additional equipment • 2 units available Machine Benefits Kodpfx Aleyaiiajgjlt Technical Machine Benefits • Range: 3100 mm Extra Information Machine still under power