Used Single-Stage Screw Clamping Device As Tech for sale (38,667)

Condition: good (used), Heavy duty high pressure washer. Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Bdsdpfx Ajh Rkiledgec Delivery is available.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Bsdsg Ewwrjpfx Adgsdc Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. Bdodpfjy H Aizjx Adgoc FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Bdjdpfx Adoww Tziogsc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1 x AL Tech UK Labelling Technologies Ltd high-performance 'print and apply' label applicator with infeed conveyor and Zebra ZE500 printer. Used to apply labels onto the short and long sides of pre-formed cardboard boxes. Model - ALritma S. Serial number - 2012050125405. Date of manufacture – 2020. Bdsdjy Uni Nspfx Adgsc Controls - 40 x programs, controlled by colour 4.3'' touch-screen. Label width - 20 mm to 107 mm wide. Speed - 50 m/minute. Electrical requirements - 110-230 V / 50-60 hz / 1 phase. Video available on request.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PLASMA CUTTING, Equipment: documentation/manual, The PROCUT model plasma cutting machine is designed to operate under all conditions. Its main advantage is a robust frame structure, making it suitable for heavy industrial use. Rails and frames are the most critical factors during the cutting process. They ensure that the machine remains stable and in good condition for a longer lifespan. It can be equipped with high-capacity power sources in sizes ranging from 1,500mm x 3,000mm up to 3,000mm x 12,000mm. All customer requirements can be integrated into the strong construction of PROCUT. This allows it to meet customer demands in the best possible way. Custom manufacturing in requested dimensions is possible, depending on your requirements and workspace. Bodpeyzhl Dsfx Adgjdc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 70000121, number of ink cartridges: 6, color channels: 6, number of print heads: 8, resolution (max.): 360 dpi, paper width (min.): 400 mm, paper width (max.): 2,800 mm, paper height (min.): 400 mm, paper height (max.): 3,700 mm, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, raster image processor, DIP-TECH GlassJet PRO 16PH – Industrial Digital Glass Printer A professional solution for digital ceramic ink printing, designed for medium to large-scale glass processing facilities. Digital Ceramic In-Glass Printing: Technology that makes the print as permanent and durable as the glass itself. Design Flexibility: Capable of printing photorealistic images, vectors, textures, and imitations (e.g., sandblasted glass effect). Robust Construction: The roller conveyor system (flatbed gantry) ensures maximum precision even with heavy glass loads. General Specifications: Manufacturer: Dip-Tech Model/Type: GlassJet PRO 16PH Serial Number: 70000121 Year of Manufacture: 2009 Number of Print Heads: 8 installed (expandable up to 16) Bdsdpfx Ajy Ia E Aodgsc Ink Type: Digital ceramic ink (requires tempering/firing after printing) Control Language: English Maximum Glass Size: 2800 x 3700 mm Minimum Glass Size: 400 x 400 mm Glass Thickness: 2–19 mm Performance & System: Print Resolution: Up to 360 dpi Number of Color Channels: 6 channels (BGWORK: Blue, Green, White, Orange, Red, Black) Control Software: GlassJet Operating System / Durasst RIP Print Head Type: Spectra Nova Transport System: Automatic roller conveyor Condition: The machine is in very good visual and technical condition, regularly maintained through its control system. It is sold with all accompanying documentation and technical drawings. A set of spare parts is also available upon request. For more information, please call: +387 63 335 445

Condition: excellent (used), Servatechnik extraction Bodpfx Adex Nbnnogedc

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Equipment: CE marking, documentation/manual, * COMBO offers customers the most innovative technological solutions and features a wide range of models. * It is a highly advanced machine equipped with a 6- and 12-station automatic tool changer ISO 40 drilling system, offering capabilities such as drilling, tapping, countersinking, plasma cutting, OXY cutting, and ±45° bevel cutting. * The COMBO has a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty machine frame. * High-durability cutting table designed for easy replacement. * Dual drive system with linear rails, rack and pinion. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optional 12-station). * CNC-controlled automatic coolant spraying system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). Bedpfxoyy Rn Se Adgjdc * Drilling depth: 100 mm * Drilling speed: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC controls. * Possibility to import .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. Bjdpfeyy Nrvex Adgsdc * 21.5'' touch screen for easy operation. * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. * Bevel cutting option available. * User-friendly design, easy access to the cutting area. * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER 1500x3000mm / 1500x4000mm / 2000x4000mm / 2000x6000mm / 2500x6000mm, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, type of cooling: water, Equipment: CE marking, documentation/manual, * The MASTER series fiber laser cutting machines deliver high cutting performance, thanks to their robust frame construction and compatibility with power sources up to 30 kW. * Equipped with an automatic, rear-exchange dual shuttle table. * The standard configuration of the MASTER includes a rear table exchange system and the option to integrate automated loading and unloading systems. * Customizable cutting areas are available. * Working ranges: 1,500x3,000 mm / 1,500x4,000 mm / 2,000x4,000 mm / 2,000x6,000 mm / 2,500x6,000 mm. * Available with Raycus, MaxPhotonics, and IPG resonators. * Compatible with Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC control units. * Enhanced usability with a 21.5'' touchscreen interface. * Compliant with CE standards. * Can be equipped with fiber laser sources ranging from 2 kW to 30 kW. * User-friendly design ensures easy access to the cutting area. * Rigid, monoblock, welded steel frame with heat treatment ensures high durability and mechanical stability. * Aluminum bridge design provides added rigidity and excellent dynamic performance. * Designed for energy efficiency with low power consumption. * Remote service capability. * Automatic lubrication system included. Bsdpfxsyy I N He Adgjdc * As design and manufacturing are performed in-house, customization according to customer-specific requirements is possible.

Condition: used, Year of construction: 2007, with feed unit for molded parts with hot melt glue specification Top condition cleaned, function tested, tested, trial run used, good condition Manufacturer: Artech-Biesse Type: Single Year of manufacture: 2007 Machine no.: 91009 CE type tested with automatic edge trimming, round edge banding tilt-adjustable worktable – for bevel edge banding extendable table extension with roller support feed system – steplessly adjustable edge thickness 0.4 - 3.0 mm workpiece height min. 10, max. 120 mm required space approx. 1400 mm x 1000 mm x 1600 mm weight approx. 320 kg total connected load 5.2 kW Bodpfx Ajvwgizodgodc Location 97447 Gerolzhofen, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee.

Condition: good (used), Year of construction: 2014, DIP TECH GlassJet NOVO digital printer: Bdjdpjiukuusfx Adgoc Print resolution: 720 dpi Ink color: black, similar to etching, white and other spot colors Maximum glass size: 2200x1200 mm (width x height) Minimum glass size: 400 x 400 mm Glass thickness: 2-19mm Print speed: up to 30 m2/h (in the context of 8 print heads for one color) Number of required operators: one Overall dimensions: 2,500 x 4,700 x 2,000 mm (width x length x height) Image format: All common image file formats including: PDF, PS, EPS, TIff, BMP, JPEG Ambient temperature 18-25 degrees Celsius Power supply: Single-phase 400VAC x 16A 50/60 Hz

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos -Dimensions: 200/145/H110 mm -Weight: 1.4 kg Bdjdpfsxvp S Esx Adgsc

Year of construction: 2015, condition: excellent (used), Dip-Tech GlassJet AR6000, Digital Printer for Glass, year 2015 Print resolution: 360 dpi (real) DIP SPECTRUM INK: Ceramic ink for both tempered and fired annealed glass Ink colors: Black, white, etch imitation, and various spot colors There are currently 7 print heads in operation: 4 black and 3 white. They enable the printing of black and white. Maximum glass size: 3300 x 6000 mm Minimum glass size: 400 x 400 mm Bederhkp Eepfx Adgjdc Glass thickness: 2 – 19 mm Operators: 1 Inline functions: Continuous conveyor Overall dimensions: 6071 x 7746 x 1600 mm (width x length x height) Image format: All common graphic formats including: PDF, PS, EPS, Tiff, BMP and JPEG Ambient temperature: 18 – 25 C Installed power: 400 VAC x 16A, 3 Ph. 50/60Hz In very good condition. Dismantled in February 2024. Available: NOW

Condition: new, Year of construction: 2024, machine/vehicle number: L24110255, HoKuTech band saw HoKu BS 640 AS with lower and upper "blue Gruber guide" Work table dimensions 600 x 885 x 840 mm, Flywheel D = 640 mm, max. cutting height 400 mm, max. cutting width 620 mm, Inclination of the work table 0° - 20°, Band saw blade length 4,770 - 4,810 mm, Band width 8 - 35 mm, Motor 2.2 kW (3 HP), Extraction nozzle 2 x D = 120 mm Dimensions 1,050 x 720 x 2,180 mm, Weight approx. 300 kg, from the Seevetal location, as viewed, Bdodpevmw Ugjfx Adgoc without transport, subject to prior sale

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: Bsdpfx Ajfnvvijdgodc - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) Bedpfjfnvwqsx Adgedc - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2025, machine/vehicle number: CATXQP20KXPZ00144, fuel type: diesel, motor manufacturer: Cat C2.2, General information Field of application: Construction Weights Empty weight: 815 kg Functional Generator capacity: 20 kVA Dimensions of cargo space: 172 x 100 x 130 cm CE mark: yes Other information Fuel consumption: 5.5 Liter / hour at 100% Load Generator: Cat LC1100 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 56 l Bdodpfx Adjzayxfegjc Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames - Noise Rating: 65 dB at 7m and 100% Load - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: new, Year of construction: 2025, machine/vehicle number: 2440236, fuel type: diesel, motor manufacturer: Deutz TD2.2L3-SV, General information Field of application: Construction Weights Empty weight: 1.500 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 254 x 114 x 165 cm Bdedpfxezaig Se Adgoc CE mark: yes Other information Fuel consumption: 6 Liter per hour at 75% Load Generator: LEROY-SOMER TAL042-C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: used, mileage: 4,34,500 km, power: 176 kW (239.29 HP), first registration: 02/2005, overall weight: 14,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2005, Equipment: ABS, air conditioning, all wheel drive, crane, * Euro Cargo 140 E 24 W * Single tires, 4x4 all-wheel drive * Atlas loading crane AK 65.2 A1 * Grab and rotary servo control * Grab and rotary servo control, 5th and 6th hydraulic circuit Bsdpfx Adey Svdisgjdc * Meiller 3-way tipper * Cab rear wall with window * Main exterior mirrors electrically adjustable * Access steps for construction vehicles * Trailer coupling (Rockinger) * Roof hatch/ventilation flap * Tachograph * Rotating beacon (yellow) * Exterior sun visor * Leaf spring suspension * Unladen weight: 8,530 kg * Towing capacity: 14,000 kg * Overall vehicle length: 6,800 mm * Width: 2,550 mm * Height: 3,550 mm * Three passenger seats (bench seat) * Halogen headlights * ABS * Disc brakes * Reinforced stabilizers on front and rear axle * Differential locks front and rear axle * Adjustable steering column * 6-speed gearbox * PTO, gearbox-dependent * 115 L diesel tank * Trailer braking system * Wheelbase: 3,690 mm * Air conditioning * Electric windows and mirrors * Radio * 395/85R20, 15 mm tread front and rear * Air-suspended and heated driver’s seat * Lumbar support * Front bumper with towing eye * One previous owner * Two vehicle keys * and much more * Subject to errors, changes, and prior sale!

Condition: used, mileage: 4,34,500 km, power: 176 kW (239.29 HP), first registration: 02/2005, overall weight: 14,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2005, Equipment: ABS, air conditioning, all wheel drive, crane, * Euro Cargo 140 E 24 W * Single tires, 4x4 all-wheel drive * Atlas loading crane AK 65.2 A1 * Grab and rotary servo control * Grab and rotary servo control, 5th and 6th hydraulic circuits * Meiller three-way tipper * Cab rear wall with window * Main exterior mirrors electrically adjustable * Steps suitable for construction site vehicles * Tow coupling (manufacturer: Rockinger) * Roof hatch/ventilation flap * Tachograph * Rotating beacon (yellow) * Exterior sun visor * Leaf suspension * Unladen weight: 8,530 kg * Vehicle overall length: 6,800 mm * Width: 2,550 mm * Height: 3,550 mm * Permissible trailer weight: 14,000 kg * 3 seats, passenger bench * Halogen headlights * ABS * Disc brakes * Reinforced stabilizers front and rear axle * Differential locks front and rear axle * Adjustable steering column * 6-speed gearbox * Air conditioning * Heated seats * PTO (transmission-dependent) * 115 L diesel tank * Trailer brake system with red, yellow, and Duomatic connections * Trailer hydraulics * 3,690 mm wheelbase Bjdoy Svdvepfx Adgjdc * Electric windows and mirrors * Radio * 395/85R20 tires, 15 mm tread depth front and rear * Driver's seat air-suspended and heated * Lumbar support * Front bumper with towing jaw * 1 previous owner * 2 vehicle keys * And much more. * Errors, changes, and prior sale reserved.

Condition: new, Year of construction: 2026, machine/vehicle number: 282285, fuel type: diesel, motor manufacturer: Yanmar 4TNV98C, General information Field of application: Construction Weights Empty weight: 570 kg Functional Generator capacity: 33 kVA Dimensions of cargo space: 210 x 87 x 117 cm CE mark: yes Other information Bdedpfxsy T Uxbs Adgoc Fuel consumption: 5,2 Liter/Hour at 75% Load Generator: Leroy Somer TAL-042C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 70 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2026, machine/vehicle number: 7735357, fuel type: diesel, motor manufacturer: Scania DC13 072A, General information Field of application: Construction Weights Empty weight: 5.215 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 467 x 160 x 245 cm CE mark: yes Other information Fuel consumption: 72 Liter / Hour at 75% Load Generator: Mecc Alte ECO40 3S4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1750 l Production country: IT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank Bjdpfey T D Dysx Adgodc = Remarks = Stage V Generator Stage V Aggregaat Stage 5 Generator Stage 5 Genset Stage V Gen set Stage V Generator set EU Stage V Generator StageV

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH spiral sand washers are reliable systems that offer high efficiency in separating and cleaning fine materials that need to be washed. These machines are designed to effectively clean gravel, sand, or crushed stone containing large amounts of clay, dust, and dirt. Thanks to their heavy-duty steel construction, they provide long-lasting performance even under harsh working conditions. Their durable body, wear-resistant structure, and easily replaceable spare parts minimize maintenance costs. Constmach spiral washers are manufactured with high-quality materials and superior engineering design, ensuring trouble-free operation in both stationary and mobile facilities. They adapt to different production needs with single or double shaft configuration options. Furthermore, the specially designed gearbox and replaceable rubber boots enable long-term, quiet, and efficient operation. Its simple assembly structure makes installation easy and allows for quick commissioning. Screw Washer Technical Specifications Model: CSW-50 Dimensions: Φ 500 x 5,000 Motor Power: 4 kW Capacity: 25 – 45 m³/hour Rotation Speed: 24 rpm Water Requirement: 25 – 45 m³/hour Weight: 2,800 kg Model: CSW-60 Dimensions: Φ 600 x 6,000 Motor Power: 2 x 5.5 kW Capacity: 40 – 75 m³/hour Rotation Speed: 20 rpm Water Requirement: 35 – 55 m³/hour Weight: 5,200 kg Model: CSW-75 Dimensions: Φ 750 x 7,500 Motor Power: 2 x 7.5 kW Capacity: 45 – 80 m³/hour Rotation Speed: 20 rpm Water Requirement: 40 – 60 m³/hour Weight: 5,800 kg Model: CSW-80 Dimensions: Φ 800 x 8,000 Motor Power: 2 x 11 kW Capacity: 50 – 90 m³/hour Rotation Speed: 20 rpm Water Requirement: 45 – 65 m³/hour Weight: 6,250 kg Why Choose a CONSTMACH Spiral Sand Washer? Constmach manufactures high-performance, low-maintenance, and durable machines with years of experience in the concrete and aggregate industry. Our helical sand washers combine quality with long-term usage assurance. Each of our European standard-manufactured equipment ensures energy savings with optimal efficiency. We also maximize user satisfaction with after-sales technical support and fast spare parts supply. For professionals seeking superior engineering, reliable performance, and long-lasting use, CONSTMACH spiral sand washers are the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Bdodsxpxv Tepfx Adgoc