Used Temsa Prestij Sx for sale (354)

Condition: ready for operation (used), Year of construction: 2005, Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible. Cjdswal Imspfx Ah Tjgu

Condition: used, functionality: fully functional, machine/vehicle number: AJ21460A, We are selling here in quantity 2 stackers from Agfa from the Elantrix series. They work perfectly and can be picked up immediately. Our price per piece is 2500,-€ on negotiation basis. Cgjdpfx Aotncgaeh Tou

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm Codpsq U Sa Sjfx Ah Togu square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Codpsq U R Ruofx Ah Tegu Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Cgsdpjq U R T Nefx Ah Teu Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: used, mileage: 56,000 km, power: 70 kW (95.17 HP), first registration: 11/2022, fuel type: diesel, overall weight: 1,820 kg, color: white, gearing type: mechanical, Total permissible weight: 1820kg Cgodpfx Ahoww Rvqo Teu

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, machine/vehicle number: SX8T_8, pressure (max.): 8 bar, Exhibit: Compressor Kaeser SX 8 T (8 bar) with integrated dryer with SIGMA CONTROL 2 Year of construction: 2024 Operating hours: 3 Bh Techn.Daten: Volume flow at 8 bar: 0.80 m³ / min Motor power: 5.5 kW pressure dew point: +3°C Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 915 x 970 mm Weight: 200 kg Cedpfxevntmuj Ah Tsgu Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Year of construction: 2023, operating hours: 11 h, condition: as good as new (ex-display), machine/vehicle number: MA0144_1922, Exhibit: Compressor Kaeser SX 8 (10 bar) with SIGMA CONTROL 2 Year of construction: 2023 Operating hours: 1 Bh Techn.Daten: Volume flow at 10 bar: 0.67 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. Cgjdpfx Ahjh Ey Rce Tju On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: new, Year of construction: 2025, functionality: fully functional, Exhibit: Cgedpfx Aowztt Hsh Tsu Compressor Kaeser SX 8 Special Edition (8 bar) with SIGMA CONTROL 2 Year of construction: 2025 Operating hours: 0 Bh Techn.Daten: Volume flow at 8 bar: 0.80 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: used, Year of construction: 2017, Blast Cabinet with Extraction System Blast Cabinet: Manufacturer: SGT Strahlmaschinen AG Model: SX-100 / DK / 4P Extraction System: Manufacturer: Gläsner Plant No.: 5V 3028 055 Cedpfoyddufox Ah Togu Voltage: 400 V Frequency: 50 Hz Power: 2.2 kW The blast cabinet is sold together with the extraction system. Purchasing individual components separately is not possible. Inspection is available by appointment.

Year of construction: 2024, condition: used, New: Yes Cedeykcg Hjpfx Ah Togu Applicable material: Manure Attachment suited for: Agricultural machines

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,41 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. With Linear guide of the saw head. •new system with head sliding vertically on linear guides Upstream slide rails with recirculating balls. •Double gear set for high transmission performance •4 speeds 15/30/45/90 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 350x32x2.5 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side •Turntable with additional central axis Cgodpsfg Rlbsfx Ah Tou

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader Cedpjx Suzasfx Ah Togu * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: new, Year of construction: 2025, Genie SX105XC all-wheel drive telescopic work platform, new, used, demonstration machines available Cedpfx Aewu Emxjh Tsgu

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Model: BSB-45 SX-2 Cgjdpfxoybbhqo Ah Teu Year: 2004 Total connected load: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Machine weight: 950 kg with roller tables

Condition: new, mileage: 500 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro3, Equipment: ABS, air conditioning, Mercedes Benz Arocs 5 4140 8x4 EURO3 with Schwing concrete pump S 43 SX III First registration: without registration (registration not possible in Europe) Csdpfx Ahoi Ti Ume Tjgu Km: 500 Color: Arctic white Technical data * KW 290 * HP 394 * Front axle tires 315/80R22.5 * Rear axle tires 315/80R22.5 * Total weight 41000 * Emissions class Euro 3 * Gearbox: Automatic (Mercedes-Benz Powershift 3) * Condition new vehicle * Wheelbase: 5750mm Chassis equipment * Two-disk clutch * M cab low roof, 2.30m, tunnel 170mm * Front axle 7.5t straight version * Rear axle, crown wheel 300, planetary 13.4t * Gear oil cooling * Servotwin steering * Tank 390L aluminum * Disc brakes front and rear * Sun visor * Air conditioning * ABS + ASR * Driver's suspension seat * Radio with USB, instrument cluster 10.4cm * CB radio pre-installation * Rotating beacons pre-installation * Cruise control Structure equipment * Schwing S 43 SX III 5-bend concrete pump * Number of joints: 5 * Mast pipe: Super 2000 DN 125 * Reach height: 42.30m * Reach from turntable: 37.55m * Distribution boom 43RZ * Pump type: P2525-120/85 * Delivery rate: 162m3/h * Vector control * B-Rock slide system * Electric vibrator system on funnel grate * Swivel range 2x 365° * Support system full support CE * Filling height approx. 1350mm * Hydraulic drive max V 636l/min. * Feed cylinder diameter 250mm * Water tank 610l, roller water pump * Remote control Schwing Control 30 * Oil cooler * MPS control Technical specs * KW 290 * HP 394 * Front+rear Tires 315/80R22.5 * kg Total Weight 41000 * Emission Class Euro 3 * Transmission: automatic, Mercedes Powershift 3 * Condition new * Wheelbase: 5750mm Equipment Chassis * Double clutch system * M Cabine Low Roof, 2.30m, tunnel 170mm * Front axle 7.5t * Rear axle, 13.4t * Oil-gearbox cooling * Sterring system Servotwin * Tank 390L aluminum * Sun visor * Air condition * Disc brakes front + rear * ABS + ASR * Driver's seat Swing seat * Radio with USB, 10.4" display *Preparation for CB radio * Pre-preparation for signal lights on cabine *Speed control Equipment construction * Schwing S 43 SX III 5-arms concrete pump * Number of joints: 5 * Pipes: Super 2000 DN 125 * Vertical reach: 42.30m * Range from turnable: 37.55m * Placing boom 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162m3/h * Control system VECTOR * Slide system B-Rock * Electr. shaking system on funnel rust * Swivel range 2x 365° * Support stand system full support, CE * Filling height aprox. 1350mm * Hydraulic drive max V 636l/min. * Conveying cylinder 250mm * Water tank 610l, Roller water pump * Control system Schwing Control 30 * Oil cooling system * MPS Control system Offer subject to change ex Cologne. Subject to prior sale and errors. Sale to businesses only. Non-binding offer EXW Cologne. Intermediate and mistakes excepted. Sale to businesses only. ?? We speak German - We speak English - Hablamos español - Nous parlons français - ????? ????? - ????? ????

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. Basic equipment: •Saw head slides on recirculating ball linear double guides •Three-stage gearbox •continuously variable speeds 15-150 rpm •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ Cgsdefg Rldspfx Ah Tju loading side

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min total power requirement 1,5/2,2 kW Cjdpfxjfc T Uge Ah Tegu weight of the machine ca. 0,285 t dimensions 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left.

Condition: used, functionality: unexamined, machine/vehicle number: SX-50, Used Cameca SX-50 Electron Microprobe Cameca SX-50 electron microprobe is used (Electron Probe MicroAlalyses). it has a 6” inch stage, 3 WDX Spectrometers with several Cristals LiF, PET, TAP, ODPb, PC1, PC2, PC3. Cgjdpfewnb D Tsx Ah Teu Electron probe microanalysis (EPMA) are generally considered micro-analytical techniques which are able to image or analyze materials we can not generally observe with the resolution offered by visible techniques System is complete with all Books, service Manuals, Software and computer. Also many parts. 1 x Leybold Trivac D16B Vacuum Pump 1 x Alcatel 2012 A Vacuum Pump 2 x integrated Turbo Pumps

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: S2926SMA0099.10801, Laminator from the Swiss company 3S ( Swiss Solar Systems ). Data available in photos. Csdpfx Ajvad Imeh Tegu

Condition: used, Year of construction: 2003, operating hours: 200 h, functionality: fully functional, fuel type: diesel, color: blue, power: 80 kW (108.77 HP), output voltage: 400 V, output frequency: 50 Hz, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power (apparent): 100 kVA, Used Diesel Generator – Volvo Penta TAD 520 GE | 100 kVA / 80 kW | Enclosed Technical Specifications: Brand: SES (Scandinavian Engineering Systems A/S) Engine Model: Volvo Penta TAD 520 GE Power Output: 100 kVA / 80 kW Voltage: 400/231 V Frequency: 50 Hz RPM:1500 Year of Manufacture: 2003 Enclosure: Yes (Soundproof cabinet included – see photos) Cedpfowzimcox Ah Tegu Cooling: Water-cooled Control Panel: Integrated Condition: Used, in good working order Additional Information: Engine rated at 102 kW PRP (Prime Rated Power): 94.0 kW Alternator type: UC 274 D Fully enclosed cabinet – suitable for outdoor installation Regularly maintained Ready for inspection and immediate dispatch Photos available upon request.

Condition: used, Electronics module -Isra Vision Systems AG: PCspork v1 1 Cgsdpfx Ahjdkzvze Tou -Dimensions: 127/153/H22 mm -Weight: 0.13 kg

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free. Cgedpfx Aswrp Hkoh Tsu

Condition: used, US-2100 - 75 mm Increasingly wider bands are being demanded for the logistical and sales-promoting bundling of units. Cgjdpfx Aewrp Injh Teu The US-2100 with its unique ultra-sonic sealing processes paper and plastic bands with a width of 75 or 100 mm. The bands offer plenty of space for printing marketing-related information. The machine is easily accessible, usable in small spaces, and offers high safety.

Condition: like new (used), Year of construction: 2017, The cartons are removed from the shingle stream of the folding box machine, stacked by hand and pushed onto the transit infeed conveyor of the US-2000 TRC 900. In the system, the stack is aligned, pressed and banded three times using side guides and a front stop. For the second banding, the front stop automatically moves to the next position, which was set via the display. Cgedpfx Asvcyw Aeh Tou position set via the display. A servo band motor enables individual band tensioning for edge-protecting banding of high-quality cardboard stacks. Cycle output up to 22 stacks/min.