Used Vaptech Bg Eccentric Press Pe 160 Cl for sale (25,773)

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm Ijdpfx Aotx E Rqogysih - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: excellent (used), Year of construction: 2016, Specifications Manufacturer: IMV Model: DM125 Year: 2016 Condition: Used Stock number: 0396 Ram force: 1,250 t Number of press points: 2 Drive: Eccentric with stroke adjustment Ram stroke: 250–400 mm Strokes/min: 5–35 Vertical daylight below bolster, CBRA: 1,150 mm Table dimensions: 4,500 x 2,000 mm Ram dimensions: 4,500 x 2,000 mm Side column window: 2,600 mm Max. front column window: 4,900 mm Iisdpsyw Uf Aofx Agyjh Transfer cart: 2 units present Main motor power: 290 kW Press weight: 310,000 kg

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Iisdpszxmimofx Agyoh Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: good (used), functionality: fully functional, Offered is a knee lever press/foot press including a set of calibration tools. The machine was used in the manufacture of wedding rings. The calibration tools have European ring sizes from 82-39. The press and the tools are used, but in fairly good condition. The press weighs approx. 150 kg. Iodpfx Aevy Dutjgyoih

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm Iijdpfx Aovt Nvpsgyeh -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: used, Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible. Iisdpezvy Hajfx Agysh

Condition: used, Year of construction: 1969, Technical details: pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min distance table/ram: 300 mm Table dimensions: LxB: 440 x 620 mm Iiedsu Nfkxspfx Agyeh passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. The press is equipped with 2-hand control. *

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Iodjwaiw Sjpfx Agysih Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Condition: good (used), functionality: fully functional, Capacity 160 tons --- Bending length 1250 mm --- Stroke 250 mm --- Thrust 500 mm --- Max. installation height 480 mm --- Weight approx. 11.2 tons --- Power 30 kW --- System tool holder + tools Isdjzp Uxdopfx Agyeih

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW Iiedpju Nfizsfx Agyjh weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm Iodpfxezrpn Se Agysih table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: excellent (used), Year of construction: 1998, Rijva EP 180 Strokes per minute: 50 Motor: 8.8 kW Ijdpfx Agjz Ngvyoyoih Weight: approx. 12,000 kg

Condition: excellent (used), Year of construction: 1973, Description to follow! Iisdpfx Aezxh S Njgyoh

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, power: 1.15 kW (1.56 HP), Equipment: CE marking, documentation/manual, SANGIACOMO T15 TECHNICAL SPECIFICATIONS: Press Model: T15 CE Serial Number: 11637 Year of Manufacture: 2003 Nominal Force: 150 kN Nominal Stroke: 1.8 mm Adjustable Stroke: 7÷60 mm Stop Position: TDC (Top Dead Centre) Ram Adjustment: 40 mm Stopping Time: 79 ms Strokes per Minute: 165 Safety Distance (1.6 m/s): 127 mm Maximum Die Area: 260 x 360 mm Maximum Shut Height: 226.5 mm Minimum Shut Height: 200 mm Upper Die Mass: 25 kg Flywheel RPM at 1st: 165 Max Insertions at 1st: 70 Installed Power: 1.15 kW Iiedpfey Nx Ncex Agyoh Voltage: 400 V Auxiliary Voltage: 24 V Working Air Pressure: 5.5÷6 bar Weight: 630 kg • Work table reconditioned on CNC machine. Complete with user manual, CE conformity certificate, and 6 months warranty (excluding electronic parts). INSTALLED NEW COMPONENTS: • Magnetic safety sensors on guards; • Flywheel bearings; • Electrical panel with touch screen;

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Iedpfowndnujx Agysih Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table Iiodpfxjykb Dqs Agyoh - Base frame, height 28 cm The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front cover - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control - Current UVV inspection with braking time measurement Following the modernization, the machine is approved for manual loading operations on the open die.

Condition: used, pressure 200 t throat - mm stroke 250 mm Table dimensions 2420 x 840 mm ram surface 1850 x 650 mm dayligth 500 mm ram adjustment 110 mm distance between columns 1900 mm table height 170 mm no. of strokes 25 - 45 Hub/min total power requirement 22 kW dimensions of the machine ca. 2550 x 2370 x 3820 mm weight 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac Iedpfx Aogk Rfzjgyeih - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement.

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min Iisdpeu Nfi Ujfx Agyeh table surface area: 900x640 mm throat: 355 mm ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Year of construction: 2016, condition: reconditioned (used), Machine name:Dunkes drawing press Type:HDZ 160 Year of manufacture:1988 Year of reconstruction:2016 Electrical drawing:16001E1 Operating voltage:3AC 400V Isdpfx Agepl T Rweyoih Frequency:50Hz Rated current:100A Control voltage:24 VDC

Condition: good (used), DIGÉP SD63 Eccentric press, 63 ton eccentric press for sale manufacturer: DIGÉP type: SD63 Iiodsiukrrspfx Agyjh year of manufacture: 1975 – pressing force: 63 t – slider stroke: 10-110 mm – slider adjustment: 70 mm – stroke rate max: 60 1/min. - table size: 740x560 – main motor power: 5.5kw 400V 50Hz – total weight: approx. 4200 kg

Condition: used, Year of construction: 1990, ECCENTRIC PRESS GIZELIS 150t PRESSURE 150t TABLE DIMENSIONS 1000x660 mm STROKE 120-220 mm Iijdpjx N Sr Dsfx Agyoh POWER 11 kW WITH HYDRAULIC CLAMPING SYSTEM

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload Iiodstycdkspfx Agyeh - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm Iiedpju N A Uusfx Agyjh total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Iiedpfx Agjy Hqz Soyoh Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: TYPE 63 R4, functionality: fully functional, operating hours: 100 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 63 t, overall weight: 4,600 kg, Equipment: documentation/manual, EECCENTRIC PRESS OMERA Model: 63 R4 Basic Technical Data Nominal force: 630 kN Motor power: 5.5 kW Strokes per minute: 45–104 Slide stroke: 9–120 mm Clearance between table and ram: 310 mm Table dimensions: 750 × 570 mm Ram dimensions: 500 × 350 mm Table thickness: 65 mm Table opening: 165 mm Machine weight (approx.): 4,600 kg Machine dimensions (for transport): 2806 × 1244 × 1492 mm Power supply: 380 V / 50 Hz / 3 Ph Machine color: RAL 7035 (light grey) / moving parts RAL 5017 (blue) Machine Equipment Centralized lubrication system PLC: SCHNEIDER with control panel Inverter for adjustable press speed Pneumatic clutch Balancing cylinders Hydraulic overload protection system VPN connection for remote access Additional Equipment Iedpfx Asyn Sdpogysih Additional work plate 750 × 570 × 65 mm (1 pc) Vibration dampers (1 set) Work area lighting (1 set) Tool protection and press operation monitoring system Machine Details Serial number: CM18355 Year of manufacture: 2022 Operating hours: approx. 100 Condition: Machine used only for demonstration and tool testing Documentation Complete documentation in Croatian language (printed and digital) Electrical and hydraulic diagrams CE Declaration of Conformity Disassembly, preparation, and loading for transport: approx. 1,500 EUR