Eccentric Press - Single Column

Maskinexport nicht bekannt

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning 16,850 kg 91 kW Podpfxeyltr Ao Abpora Top condition

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, We are selling this lathe. Podpex Auwgjfx Abpjra Accessories included: steady rest, additional milling attachment. Turning length: 8000 mm Diameter over bed: Ø 2020 mm Diameter over cross slide: Ø 1600 mm Spindle bore: 120 mm Spindle speed/ranges: 180 rpm Spindle power: 80 kW Tailstock spindle: Ø 400 Spindle travel: 250 mm Dimensions: Length: 15360 mm Width: 3520 mm Height: 2600 mm Weight: 78000 kg The machine is located in the area of the former Vítkovice Foundry in Ostrava, Czech Republic. The machine is connected and can be tested. We can send a video of the machine via WhatsApp.

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, Podou Ib Dropfx Abpsra - program sequence via both presse(synchronized) and single available Optional are tools available! Copy of documentation available i.D. *

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Height:2200mm Prsdpfx Abeycu E Espea Weight:2900kg

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Podpfx Asx Tgr Tsbpsra Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Predpewpku Djfx Abpoa Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Prsdpjytyf Sofx Abpoa Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Psdswtctyepfx Abpora Control panel Cooling unit for Rittal electric cabinet *

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: Prodpfx Abot I D U Ejpea - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: used, Modular milling cutter Module 8 20 degrees Length 1800 mm Diameter 120 mm Inner diameter 40 mm Psdpfsdklt Njx Abpsra