Used Voran Single Belt Press Ebp580 for sale (27,580)

Condition: used, Year of construction: 1996, Technical details: Nedpfetxdmwex Ab Ujdb pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station *

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Nodpfx Aek S Htxeb Usdb Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, It was used for extracting juice from apples. Belt width: 200 cm, capacity approximately 16 tons/hour, juice yield 60–78% depending on the quality of the raw material. Njdpfsxn Ulusx Ab Ujdb

Condition: used, Year of construction: 1996, pressure 45 t throat 230 mm stroke 0 - 160 mm no. of strokes 120 Hub/min Ndjdpfxoykb Dwo Ab Uob ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,95 t

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec Nsdpfxou Nfwlo Ab Usdb daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Year of construction: 2026, condition: new, The PT-1050 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 2000 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 2.5 kW, 230 V Dimensions L × W × H (mm): 2650 × 1650 × 1650 Weight: 1500 kg Belt width: 750 mm Belt speed: adjustable Nedpfx Abjukq Tae Usdb Juice collection tray with sieve, mesh size Ø 2 mm Juice pump

Condition: used, pressure 130 t throat 450 mm stroke 20 - 200 mm max. distance table - ram at biggest stroke 500 mm no. of strokes 80 Hub/min ram adjustment 110 mm table surface area 1400 x 880 mm ram surface 900 x 450 mm total power requirement 11 + 2,2 (Hydraulik) kW weight of the machine ca. 14 t dimensions of the machine ca. BxTxH 1,55 x 2,68 x 3,46 m Features: - hydraulic clutch - hydraulic overload protection Ndodpfx Aozupkfjb Usb - hydraulic ram adjustment - cam-operated shift mechanism - enlarged table The machine is being partially overhauled at our facility as follows: - complete disassembly and inspection - new paint job - new main drive - new separate control cabinet with touch panel, including machine wiring - Left/right work area enclosure with safety light curtain and cycle operation - New two-hand control panel on a separate stand

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 0.67 kW (0.91 HP), input voltage: 400 V, We are selling a Voran-brand press, including accessories. It processed approximately 40,000 liters per year. It is in good condition. Technical data is available on the manufacturer's website, Voran. On-site inspection is possible in the Plzeň region, Czech Republic. If you are interested, please send me a message. I do not speak English. Nsdpoxndyzsfx Ab Usdb

Condition: used, pressure 45 t throat 230 mm stroke 10 - 140 mm no. of strokes 80 Hub/min ram adjustment 55 mm Nodpfxeykb Dde Ab Ujdb total power requirement 3,0 kW weight of the machine ca. 2,7 t

Condition: used, pressure 25 t throat 250 mm stroke 10 - 120 mm no. of strokes 120 Hub/min Ndodpfjykb A Tex Ab Ueb ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 1,95 t

Condition: used, pressure 35 t throat 300 mm stroke 10 - 120 mm no. of strokes 110 Hub/min ram adjustment 50 mm total power requirement 3 PS Ndsdoykb D Ropfx Ab Uob

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm Ndedpsykb Ebjfx Ab Usb stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: used, pressure 80 t throat 320 mm stroke 8 - 112 mm table surface area 830 x 600 mm no. of strokes 30 - 85 Hub/min Ndjdpetqm Dmefx Ab Uob ram surface 650 x 400 mm ram adjustment 71 mm clamping plate 990 x 550 mm table height over floor 810 mm table height over floor 800 mm column daylight (vorn) 680 mm column daylight (hinten) 520 mm total power requirement 7,5 kW weight of the machine ca. 7,7 t dimensions of the machine ca. 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table Machine was/is partially overhauled: - Complete disassembly and inspection - Table and ram surfaces milled - New seals and hydraulic hoses - new main engine - the two main bearing bushes, the bushing of the 3rd bearing and the connecting rod bushing are new - Shaft machined and booked out - Painting - new control cabinet with PLC and touchscreen including cabling. - Current UVV test with braking time measurement

Condition: used, Year of construction: 2004, pressure 25 t throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm Ndodpfxjykb D Dj Ab Usb total power requirement 3,5 kW weight of the machine ca. 2,8 t

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Ndjdotrpiiopfx Ab Uob Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm Nodpexna Uzsfx Ab Uodb max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW Ndjdpfoxu Dwmex Ab Ueb weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t Ndjdpfsyif Nrsx Ab Uob dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: used, Year of construction: 1994, punching pressure:20 t total power requirement:4 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:3,2 x 1,4 x 1,45 m punch diameter:max. 105 mm sheet thickness - max.:6 mm Nodpfxoh Ra Rnj Ab Uedb stroke length max.:25 mm voltage:380 V frequency:50 Hz connected load:4 kVA punch diameter:105 max. mm input unit:0,01 mm

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Ndodpfxetx E N Ts Ab Uob Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m Njdpou Nfg Hefx Ab Uodb - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 - at the moment without electric cabinet, without control, without air pressure tank i.D. *

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 20 t, Single-column press – Manufacturer: Durendus – 3–20 t hydraulic press – Table 1000 × 400 mm For sale is a hydraulic single-column press (C-frame) from Durendus with an adjustable pressing force of 3 to 20 t. This compact and robust machine is ideal for assembly, pressing, and light forming operations in the workshop and production environments. ==== Ndsdpex Ap Utofx Ab Ueb Technical data & Information: Hydraulic Single-Column Press – 3–20 t ==== General Information - Manufacturer: Durendus - Model: assembly press / single-column press - Design: C-frame press - Pressing force: 3 – 20 t (adjustable) - Machine weight: approx. 1,200 kg - Paintwork: RAL 7035 (light grey) / RAL 2009 (orange) ==== Working Area - Max. distance table – ram: 500 mm - Stroke / travel: 500 mm - Table height: 940 mm ==== Table & Ram - Table plate: 1,000 × 400 × 40 mm - Ram: Ø 250 mm, round, interchangeable ==== Speeds - Downstroke speed: 2 – 10 mm/s (adjustable) - Upstroke speed: 20 mm/s ==== Hydraulics - Motor power: 2.2 kW - Oil tank capacity: 60 l - Pump: Agro-Hytos or equivalent ==== Equipment & Operation - Pressure adjustment via rotary knob - Robust machine frame - Control cabinet technology from renowned manufacturers - Emergency stop ==== Documentation & Delivery - CE declaration - German-language documentation - Installation, commissioning, and training available at extra charge ===== Assembly work, pressing operations, workshop applications, small series production, light forming operations Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die set-up press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our major strength is in special-purpose machine construction and press automation. We supply custom hydraulic presses at surprisingly attractive prices. The hydraulic systems of our presses are equipped mainly with components from leading European manufacturers.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m Nsdpfxofx Hv He Ab Uodb hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1960, pressure 1000 t Ndjdpfx Absw Syd Ee Ujb stroke 600 mm weight of the machine ca. 4 t

Condition: used, pressure 100 t stroke 300 mm Cylinder 205 mm distance between table / ram 520 mm table surface area 1100X350 mm ram surface 350X350 mm total power requirement 7,5 kW with roller conveyor, 1: Roller conveyor: 2000x500 inlet 1: Roller conveyor: 2000x500 outlet The tech. Data are manufacturer or operator information and therefore non- Ndsdpfeyutqwox Ab Ujb binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team