Used Weiler Praktikant Vc for sale (672)

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Lsdpfey T Hqcjx An Iohi Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. Lhodezcv Egopfx An Iji 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Ledeyuyruepfx An Iohi Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: good (used), Year of construction: 1996, functionality: unexamined, turning diameter over cross slide: 700 mm, turning length: 2,000 mm, turning diameter: 700 mm, spindle bore: 106 mm, spindle speed (max.): 1,800 rpm, For sale: 1 used rotary lathe Manufacturer: Weiler Werkzeugmaschinen Type: E70 Year of manufacture: 1996 Lhodpfx Asy R Dyvsn Iei Technical data: Center height: approx. 355 mm Swinging diameter over bed: approx. 700 mm Swinging diameter over cross slide: approx. 420–450 mm Distance between centers: 2000 mm Spindle bore: 106 mm Includes the documentation shown in the pictures, chip conveyor, and Sauter tool holder. The machine can be viewed at our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta Lhsdpfx Ansy Tmkvo Iji >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: ready for operation (used), L & Z Spindle Lathe WEILER MATADOR, from a vocational school Ledpfszdzplsx An Iehi -Center height approx. 150mm -Swinging diameter over the carriage approx. 160mm -Swinging diameter over the bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600 kg Errors and omissions excepted.

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat Ljdsy Ty Ihopfx An Ijhi tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 Lodpfoy Ti Iwex An Iohi - Bezel - Parat 4 compartment tool turret

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Lhjdpfxevadqzo An Ioi Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: ready for operation (used), L & Z Spindle Lathe, WEILER MATADOR, from a vocational school -Center height approx. 150mm Ljdpfx Anozduyqs Iohi -Swinging diameter over cross slide 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal/facing feeds -Tailstock MK3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600kg Subject to errors and omissions.

Condition: new, functionality: fully functional, Hand lever quick-change chuck Spindle speeds from 110 - 3600 rpm Multifix A head Collets Lhedpfx Ajzc I A Ren Iei

Condition: reconditioned (used), Year of construction: 1989, Universal lathe with guide and lead screw Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted RAL 7035 light grey Machine no.: 1401 With guarantee Accessories: - 3-axis digital display FAGOR Innova 30i T, new - Chuck guard with electrical safety device, new - Quick-change tool holder base body, size B - Bed stop - Coolant system Lhodsg R S Rcepfx An Iei - Chip guard - Operating manual -used, as is -

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Spindle bore: 56 mm with guarantee Lhjdpfxomgaddj An Isi geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Ledpfx Aezcn Akjn Ijhi

Condition: ready for operation (used), Year of construction: 2003, Machine type CNC turning and milling center Manufacturer WEILER Type DZ 67 / V3 Year of manufacture 2003 Condition Used Control system type CNC Control system Siemens 840 D Location D-64625 Bensheim Turning diameter 220 mm Lhodpfx Ansza Aqws Ioi Turning length 450 mm Control system Siemens 840 D Tool turret SAUTER VDI 30 - 12x Tool holders Various VDI 30 Bar feed LNS Quick Load Servo 3 mm Collets Various collets Main drive DC 27 kW Total power consumption 27 + 8.5 + 5 + X kW Machine weight approx. 6.5 t Space requirement approx. 10 x 2 x 2 m Additional information Various accessories - Collets - Chuck jaws - VDI tool holders with and without drive - Documentation

Condition: good (used), 1 used lead and feed screw lathe Make: Weiler Model: Condor VS 2 Technical Data: Centre height: 160 mm Centre distance: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock taper: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (W x D x H), approx.: 1930 x 880 x 1470 mm Equipment: Ledpow Rcrcefx An Ishi 3-jaw chuck Quick-change toolholder system Multifix

Condition: ready for operation (used), Machine type CNC turning machine Manufacturer WEILER Model Lhsdpeza Anpefx An Iei UD 24 Year of manufacture Condition Used Control type CNC Control system BOSCH CC 200 Turning diameter 190 mm Turning length 190 mm Control system BOSCH CC 200 Total power consumption 12 kW Machine weight approx. 1.6 t Space requirement approx. 2 (9) x 1.5 x 1.8 m

Condition: used, WEILER Commodor incl. 3-axis digital readout Heidenhain - 3-axis digital readout / Heidenhain - Center height: 180 mm - Swing diameter over bed: 330 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Spindle speeds: 25–2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial / module etc. - Multifix toolpost with inserts - Chuck guard - 2x emergency stop - Three-jaw chuck - Chip guarding rear wall - Very well-maintained condition - Machine feet - Documentation Dimensions: LxWxH 2.3x1.2x1.6 m / Weight 1600 kg Errors and omissions excepted. Lhsdpfx Aey Dcppen Iji

Condition: good (used), Weiler lathe Ledpfol Ayd Rjx An Ijhi Turning diameter bed: 280 mm Turning diameter support: 180 mm Turning length: 800 mm Spindle bore: 24 mm Speed max: 1600 RPM Diameter faceplate: 140 mm Included tools and coolant pumpe Dimensions: 156x70x133 cm LxWxH

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) - Center height: 130 mm - Distance between centers: 350 mm Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets Lhjdpfjzczbysx An Iei - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. The machine can be inspected while powered.

Condition: used, Year of construction: 2005, operating hours: 11,800 h, functionality: fully functional, spindle bore: 41 mm, turning length: 750 mm, turning diameter: 330 mm, turning diameter over bed slide: 435 mm, quill diameter: 50 mm, center height: 165 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 11,000 W, overall weight: 1,400 kg, Equipment: rotational speed infinitely variable, Description For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2005 Control system: Siemens 810 D Condition: good, fully functional Location: near Munich Inspection: on-site or via video call by arrangement Pictures/Video: Further pictures and videos of the running machine will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Ledozbybvjpfx An Ijhi Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: continuously variable Feed / Rapid traverse Feed drive: Three-phase AC feed drives Feed range (continuously variable): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) transverse: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N transverse: 3,000 N Max. rapid traverse speed longitudinal/transverse: 8 / 4 m/min (Note: additionally specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information and to arrange an inspection appointment. Provider MT EVO, Puch bei Salzburg

Condition: new, Year of construction: 2022, functionality: fully functional, turning length: 500 mm, turning diameter: 240 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 530 mm, Equipment: documentation/manual, Numerically controlled turning center Weiler DZ 45 CNC / ARY with Siemens Sinumerik control system 840D sl The CNC precision lathe from Weiler for the highly productive area in production, toolmaking, research institutes and much more, toolmaking, research institutes and much more. High-quality, energy-efficient, precise and very versatile. Turning diameter 240 mm Lhodsum R Ebjpfx An Ioi Turning length approx. 500 mm Bar capacity 42 mm Main drive with 21.5 kW Powerful axis drives Suitable for chuck, bar and shaft machining Y-axis for machining complex workpieces Counter spindle Up to 16 driven tools Complete machining of workpieces in one clamping operation High rapid traverse speeds High accuracy due to direct path measuring system Wide range of applications Integrated safety function in all axes LED machine light This offer is subject to change and non-binding. Subject to alterations, errors and prior sale. Thank you for your information, payment has already been received.

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Lhedoyub Spjpfx An Isi Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Height:1200mm Weight:290kg Ljdpfxjx Tp Dxj An Iohi

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 270, center width: 900 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Swing diameter over bed: 420 mm Centre height: 210 mm Centre distance: 900 mm Spindle bore: 55 mm Spindle speed: 4 - 3,000 rpm MACHINE DETAILS Control type: Teach-in Control system: CNC EQUIPMENT Lsdey Rx A Sspfx An Iohi Digital readout (Weiler) Documentation available CE marking