Used Westtech Cs610 Compact / Greifersäge / Fällkopf for sale (4,168)

Condition: new, Year of construction: 2026, CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER SET INCLUDES: LUFT 1500 VSD+PM COMPACT screw compressor with dryer. Horizontal compressed air receiver 500 L. Key features that distinguish these models: 1. Permanent Magnet (PM) Motor Technology Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency levels compliant with IE4 or even IE5 standards. They maintain high efficiency even at very low speeds, where standard motors lose performance. They are smaller, lighter and generate less heat. 2. Advanced Inverter Control (VSD) The core of the Energy Saver line is a frequency converter (inverter). Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy. Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss. 3. Soft Start Bedpfx Aeychbaepvsdf Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which: Protects the plant’s electrical installation. Allows frequent start-stops without overheating the windings. 4. Real Savings In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life. Technical Parameters Motor power 11 kW / 15 HP Voltage 400V / 50Hz Output 0–6 bar 1620 L/min Output at 6 bar 1580 L/min Output at 8 bar 1350 L/min Output at 10 bar 1230 L/min Outlet connection (G) 1" Dimensions 1600 × 740 × 1750 mm Weight 500 kg

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: Bdedpfx Aoycg I Sopvof LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: new, Year of construction: 2026, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Bodomqlm Topfx Apvjdf Additional double filtration in the air-dryer. Set by default includes: Theor 20 screw compressor N20S air-dryer 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Set including LUFT 700 screw compressor, N10S refrigeration air dryer. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg Bsdpfx Aorh E Dispvsdf Manufacturer: Cormak

Condition: good (used), Year of construction: 2011, lifting height: 6,220 mm, fuel type: electric, Empty weight: 2.055 kg Bdodpfjznxaisx Apvjf Lifting capacity: 450 kg Working height: 822 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: FR Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Compact 8W Year of build: 2011 Condition: Use Data: Max. working height: 8,22 m Platform height: 6,22 m Lifting capacity: 450kg Lifting capacity on extension: 150kg Platform dimensions LxW: 2,31 x 1,21 m Platform length pushed out: 3,23 m Total dimensions LxW: 2,49 x 1,22 m Height transport position with railing: 2,15 m Height transport position without railing: 1,30 m Movable up to working height: 8,22 m Ground clearance: 0,06 m Drive type: Batterie indoor use only: nein Empty weight: 1.950 kg / 2055 kg Special features: white tires, anchor points for fall protection systems (PPE) available Information: First commissioned in 2011 / sold with pipe holder. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2017, lifting height: 10,000 mm, color: yellow, Drivetrain Bdjdsyhvlkopfx Apvof Drive: Wheel Weights Empty weight: 2.630 kg Functional Working height: 1.200 cm Dimensions of cargo space: 245 x 120 x 238 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Reconditioned: Yes Delivery terms: EXW Latest inspection: 2026-02-06 Production country: FR Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: good (used), Year of construction: 2009, lifting height: 8,000 mm, fuel type: electric, color: yellow, Drivetrain Drive: Wheel Weights Empty weight: 2.160 kg Functional Lifting capacity: 230 kg Working height: 1.000 cm Dimensions of cargo space: 246 x 81 x 218 cm CE mark: yes Bdjdpfx Apexpcztovsf Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Delivery terms: EXW Latest inspection: 2025-10-13 Production country: FR Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: good (used), Year of construction: 2018, lifting height: 8,150 mm, fuel type: electric, color: yellow, Drivetrain Drive: Wheel Weights Empty weight: 2.330 kg Functional Lifting capacity: 450 kg Working height: 1.015 cm Dimensions of cargo space: 245 x 120 x 226 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Bdodpfxoywrdpe Apvjf Other information Reconditioned: Yes Delivery terms: EXW Latest inspection: 2026-03-23 Production country: FR Surface type: Slab Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: excellent (used), Catalog number 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm - All spindles are equipped with a brake - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 toothed, rubber feed rollers, including 1 double roller - 3 pressure rollers at the outfeed Bdsdpfszkrm Usx Apvof Bottom: - Side pressure roller at the infeed - Toothed, feed roller, swiveling, in the lower table - 3 smooth, metal feed rollers - Rollers are pneumatically adjustable - Length of infeed table: 1190mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth adjustment of feed speed on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed via Cardan shafts - Enclosed in a cabinet - Diameter of dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approximately 5000kg ADVANTAGES – Equipped with 7 heads – Universal spindle – Ideal for both wet and dry wood – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 27595 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2007, 160 USED Wachtel Compact 1.8 Oven. Bdodpfx Apjxl Ebnevjf TECHNICAL DATA: - baking tray (trolley) dimensions: 60x80. EQUIPMENT: - gas burner, - 2 baking trolleys. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 8,324 h, load capacity: 20,000 kg, lifting height: 2,800 mm, free lift: 1,500 mm, fuel type: gas, mast type: duplex, construction height: 3,360 mm, fork carriage width: 1,800 mm, fork length: 1,300 mm, empty load weight: 29,210 kg, total length: 3,900 mm, drive type: Treibgas, construction width: 1,850 mm, Compact forklift truck - LPG Load center: 625 mm Fork width: 145 mm Bodpfeydr Dzox Apvjdf Fork thickness: 110 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Normal Front tires type: Cushion tires Front tires size: 40x20x30 Rear tires type: Cushion tires Rear tires size: 320x600/854 Description: In addition to this Hubtex model, we have around 200 more heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk locations. Visit our homepage - sago-online. Leasing & financing under attractive conditions are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this GKS200. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls, and special builds for forklifts from 8 tons and up. We are also happy to offer your vehicle for commission sale at our premises. Sideshift, fork positioner, Heater, full cabin, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,071 h, load capacity: 2,500 kg, lifting height: 5,600 mm, fuel type: electric, mast type: simplex, construction height: 3,510 mm, fork carriage width: 1,520 mm, fork length: 770 mm, empty load weight: 7,100 kg, total length: 3,350 mm, drive type: Elektro, construction width: 2,150 mm, Four-way side loader Load center: 530 Fork width: 150 mm Fork thickness: 45 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Battery voltage: 80V Battery capacity: 775Ah Battery year: 2023 Bdsdpfx Ajyvwczjpvjf Description: In addition to this Votex - Bison model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Leasing and financing on attractive terms are always available. We are also pleased to purchase your used equipment, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice about this compact model. P.S.: Our master forklift workshop is specialized in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons onwards. We can also consign your vehicle for sale at our facility. Platform height: 380 mm

Condition: ready for operation (used), functionality: fully functional, power: 25 kW (33.99 HP), Year of construction: 1990, operating hours: 5,700 h, Bobcat 741 with Deutz 29.5HP, 5,700 hours, year approx. 1990, bucket Bdedpfx Ajy Skqwjpvof

Condition: new, Year of construction: 2016, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 6 bar, total height: 1,500 mm, total width: 700 mm, total length: 1,600 mm, Equipment: documentation/manual, For sale is a system that is still in its original packaging and located in the warehouse. The system has never been put into operation. Only the originally installed Grundfos pump was removed and replaced with a new replacement pump. Otherwise, the overall condition of the system corresponds to its original delivery condition. The system includes: Water softening system Pre-filter Ultrafiltration system with a downstream reverse osmosis system Activated carbon filter UV lamp Bdsdpfx Apezbib Ssvjf All installed components and wear parts, such as filter cartridges, filter inserts, replacement UV lamp, etc., are included as spare parts. The system will be packaged and prepared for transport on four Euro pallets and one larger disposable pallet. The original purchase price was €47,788.47 net. Use of UF membranes for the filtration of viruses, bacteria, and cysts. Important minerals such as calcium and magnesium are retained after UF filtration and do not need to be added back using complex and expensive technology. - Health centers and dental practices, where people are exposed to particularly high risks of infection from waterborne pathogens. - Hotels and restaurants to provide high-quality and safe drinking water for consumption, food preparation, showering, and washing. - Legionella prevention in showers in public buildings. - Complete drinking water treatment in the household sector to improve drinking water quality for consumption, food preparation, showering, and washing. - Well water treatment

Condition: used, mileage: 94,749 km, power: 120 kW (163.15 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,200 kg, axle configuration: 4x4, color: blue, gearing type: mechanical, number of seats: 9, Maximum permissible weight: 3200 kg; All-Wheel Drive. Bjdpozqxvcsfx Apvodf

Condition: excellent (used), Year of construction: 1978, Description to follow! Bedpfx Apszl E R Aevsdf

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C91003178, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,400 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Light barrier: Lazersafe IRIS Backgauge: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: manual type WILA / Trumpf / Type B / R2 Bjdpfx Apszlhfvjvsdf Front folding support table Light work area front and back 1x set of bending tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9S1077, functionality: fully functional, operating hours: 40 h, stroke length: 270 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam Bjdozlhfiopfx Apvjdf 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100376, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Bsdpfxszlhdlj Apvedf Light barrier: Lazersafe IRIS Back stop: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Front foldable support table Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9s10075, functionality: fully functional, operating hours: 40 h, power: 5 kW (6.80 HP), total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, warranty duration: 36 months, back gauge adjustment: CNC-controlled, number of axes: 3, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Bdodezlhc Iopfx Apvef Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C121074, functionality: fully functional, operating hours: 10 h, power: 5 kW (6.80 HP), input current: 32 A, pressing force: 44 t, stroke length: 270 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, total length: 2,350 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 2,400 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 1,300 mm, bending force (max.): 44 t, distance between stands: 1,230 mm, installation height: 470 mm, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Compact Electric Press Brake C12 CoastOne - Made in Finland Press force: 44T Bending length: 1300mm Bodpfjzlhcusx Apvedf Spindles: 2x22T Control: TC15-2D Graphic Backgauge: 2-axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools included 36-month warranty after installation Delivery not included; available immediately Inspection under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9S1073, functionality: fully functional, operating hours: 40 h, stroke length: 270 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, upper tooling, small electric press brake C9s CoastOne - Made in Finland Press force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Back stop: 2-axis controlled X-R axes Bdodezlhchopfx Apvof Press brake tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of folding tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100372, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Front foldable support table Light work area front and rear Bdodpfezlhb Rox Apvof 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Viewing under power is possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C91003171, functionality: fully functional, operating hours: 10 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,400 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Light barrier: Lazersafe IRIS Backgauge: 5 axis controlled X-R-Z1-Z2-Dx axes Bending tool holder: manual type WILA / Trumpf / Type B / R2 Front folding support table Light work area front and back Bdjdpfx Apszlhbkjvjf 1x set of bending tools incl. 36 months warranty after installation Delivery plus; available immediately Viewing under power possible at any time by appointment!

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: C9100370, functionality: fully functional, operating hours: 5 h, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, total length: 1,320 mm, total width: 1,220 mm, total height: 2,100 mm, overall weight: 1,800 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 900 mm, bending force (max.): 22 t, distance between stands: 850 mm, installation height: 470 mm, warranty duration: 36 months, control type: NC control, degree of automation: semi-automatic, number of axes: 3, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS Back stop: 2 axis controlled X-R axes Bending tool holder: Type AMADA Promecam / A / R1 Bending tool holder: 4x manual quick-release adapters Light work area front and rear 1x set of bending tools included 36 month guarantee after installation Delivery plus; available immediately Bdedpfx Apszlhbdovof Viewing under power is possible at any time by appointment!