Used Wintec Mg 300 Din for sale (17,008)

Condition: used, functionality: fully functional, ES-300 ASTD cutting machine – fixed bridge saw for cutting marble, granite, and ceramics, model ES-300 A with automatic X and Z axis movement, rear stop with handwheel, and 2 idle roller conveyors. Bdjdpfx Asy Dch Eedgec

Condition: used, Year of construction: 2006, functionality: limited functionality, machine/vehicle number: 0084603, workpiece width (max.): 300 mm, Equipment: double-sided, VG FANTASTIC 300 SANDER CALIBRATION VG MACHINES MODEL DOUBLE-SIDED Bdedpfsxiycusx Adgsc FANTASTIC F/G 300 - 3KKS/3KKS - Working width: 300 mm - Total installed power: 37 kW - Configuration: RRT/RRT (lower roller + upper roller) - Motors: 2x (7.5 + 7.5 + 7.5) Belt width: 1900 x 300 mm

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade Bdjdpfoyu U Dfex Adgoc - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero QTX-340, The device was used for research purposes. SPE-Spero QTX-340, MIR microscope with 'Hyper Spectral Imaging' capability. Spectral coverage of the fingerprint region (1900 - 950 1/cm). High-Resolution IR Objective: 12.5X; NA: 0.7, 650μm FOV. Enhanced LowMag Lens Visible: 4.0X; NA: 0.13, 650μm FOV. 480*480 pixels, Broadband Microbolometer Camera, Visible camera. QT-Laser-Performance-Package including high precision automated stage (< 1μm repeatability). High-speed data acquisition, joystick, control computer, Win10. 'Discrete Frequency IR Imaging' in real time. Transmission and reflection mode. 4000 hours laser active time. Bodoy Dcd Hjpfx Adgsdc

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Bdodoxcgytspfx Adgec

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, mesh size: 50,100 mm, 300 x wire mesh decking for pallet racking (Euro pallets) approx. 88 cm x 110 cm, galvanized Load capacity 1,000 kg (with evenly distributed load) For beams 182.5 cm + 270 cm long with 4 cm beam thickness Bdsdpfx Aeyzb Acedgjc Shipping / Delivery: - max. 7 business days after receipt of payment - delivered free to site / installation location - Unloading from truck to be carried out by the buyer using their own lifting equipment - Deliveries within the entire territory of Germany, excluding islands! Deliveries to EU countries by individual arrangement.

Condition: ready for operation (used), Year of construction: 2008, overall weight: 10,500 kg, number of axes: 8, Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine. • Condition: Overhauled • Bending force: 100 tons • Stroke: 400 mm • Axes: 8 backgauge axes (Y1, Y2, Z1, Z2, X1, X2, R, X) • Crowning/Camber: Yes • CNC control: Delem DA-65 • Main motor: 11 kW • Speeds: • Approach: 200 mm/s • Working: 10 mm/s • Return: 180 mm/s Bodpfx Adjyrgdfogedc Technical Specification Bending Length 1000 mm

Condition: used, Year of construction: 2004, High-capacity band saw with roller feed MG model BMSO 320L Used semi-automatic band saw - High-capacity band saw with roller feed - Progressive hydraulic feed - Chip cleaning brush Bodsx Ng Sxopfx Adgsdc - Saw speed adjustable via electronic frequency inverter from 20 to 100 m/min - Front millimeter stop of 500mm with electric limit switch Serial number: 41021 - Blade dimensions: 4160x27x0.9mm - Motor: 1.5kW - Round cutting capacity at 90°: 320mm - Rectangular cutting capacity at 90°: 500x320mm - Square cutting capacity at 90°: 320mm

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Bjdexbfutepfx Adgodc

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 60,90,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine Bsdpfx Ajyik Hcjdgjdc -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. Bedjvl Eahjpfx Adgedc • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc) Bdsdpfx Adetndu Uegec

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Bdodpfx Aebvk I Eedgjc Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Bsdpevbrqxefx Adgsdc Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: new, Year of construction: 2024, load capacity: 300 kg, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Bdedpfxerypmve Adgec Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Bsdpfxoyttwbo Adgsdc

Condition: used, Year of construction: 2024, _____WTS-1200 Wet Salt Equipment Standard Equipment: Stainless steel folding cover, spreading container with brackets and drive, grating, removable parking stand, mounting bracket for category 2 and 3, fully hydraulic drive of the feed auger and spreading disc shaft, specially coated spreading container, stainless steel sliding plate, stainless steel spreading disc, stainless steel spreading disc device, equipment safety cover, protective cover for the hydraulic valves and electrical distribution, hydraulic block with anti-reverse protection, pressure oil filter, electronic spread pattern adjustment, LED lighting, color RAL 2011, Win-Icom road-dependent control system, stainless steel agitator shaft. Additional Equipment (for an extra charge): Work lights, wet salt system, 500L front tank made of plastic, rubber apron, winter service marking. Price from €23,450 (net). The photo is an example and may include special equipment. Storage location: null Bjdpfxeu Ebk Hj Adgodc

Condition: used, Year of construction: 2024, _____Basic equipment: two ploughshares mounted on the frame with king pin Collision protection via spring flaps Center pin secured against accidental triggering Hydraulic swivel device left-right Hydraulic installation with 4 quick hydraulic couplings and 1 unpressurized return connection Kerb deflector left-right Three-point mounting plate CAT 2N, 2 and 3N Overpressure valve Double-acting swivel cylinder Pendulum compensation up to 8° Adjustable sliding skids Central sliding skid with PU foot Spacer block for 40° end stop angle Municipal paint RAL 2011 Warning flags with holder LED lighting (only from 260 to 340) Steel scraper barOptional equipment:Three-point linkage Cat IIBoundary lights Selector valve for synchronous control 12 VSteel scraper barPicture serves as an example,Location:null Bdjdpfju Hv Szox Adgoc

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 250 kg, volume flow: 300 m³/h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Vacuum pump, Rietschle SMV 300m3/h, 0.2bar /ct1928/ Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Operating pressure: 200Mbar Motor: 7.5 KW Capacity: 300 m3/h Power: 7.5 KW, 690/400 Volt Bodpst A Ukaefx Adgsdc Inlet: diameter 60mm Spout opening: diameter 38mm

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Bdsdpfx Asvmhq Eedgoc Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Condition: good (used), The scope of delivery includes: 01x Shelf connector, used Manufacturer: Dexion type: P90 for shelf distance: approx. 300 mm Bjdpfx Aoi Enw Sodgjdc total length: approx. 380 mm cross section: U 51 x 25 mm Material color: sendzimir galvanized Weight: 0,47 kg | pcs.

Condition: good (used), Technical data for the shelf connector: Bdodpfx Adjig Hv Uogec Shelf system: Bito Included in delivery are: 01x shelf connector, used Material color: sendzimir galvanized total length: approx. 300 mm center-center hole: approx. 260 mm profile dim.: L 50 x 50 mm material thickness: approx. 2,00 mm Weight/piece: approx. 0,437 kg

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Bsdoi Enyfepfx Adgodc for shelf distance: 300 mm profile dim.: U 50 x 40 mm Material color: blue Weight: 0,55 kg | pcs.

Condition: good (used), The scope of delivery includes: 01x Shelf connector, used Shelf system: Nedcon Bdsdpfx Adsi Enyuogec type: NS suitable for frame profile width: 100 mm for shelf distance: 300 mm profile dim.: U 65 x 40 mm weight: 0,83 kg | pcs.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 0 h, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Bdsdpfew Dnd Sjx Adgoc Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.