Used Elvi Actuator for sale (588)

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input, single block -Manufacturer: Siemens, Simatic C1 single block electronic module -Type: 6EC1 653-3A -Number: 3x module available -Price per piece -Dimensions: 65/10/H100 mm -Weight: 0.1 kg Fedsh Ap Aropfx Aatspl

Condition: good (used), Position switch, drive for rotary axis actuation, electrical head with rotary axis Fpedpfxjb A Saao Aatsl -Type: ZC2-JE61 Quantity: 5 available Price: per piece -Weight: 0.3 kg

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen Fpjdpfx Aaofg E H Sstjl electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-slot plate comes from: a WOTAN drilling machine -compatible with: Linear actuator ID 22786 -Travel: 1110 mm Fjdpfod E Hk Hjx Aatopl -Clamping plate: 1000 x 1260 mm (rotatable) -Plate is: Solid -Groove width: 21 mm -Dimensions: 2470/1070/H885 mm -Weight: 2200 kg

Condition: good (used), Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos Fedpfx Aasqgi Ihjtjpl -Dimensions: 750/550/H445 mm -Weight: 35 kg

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm. BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h). Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Fpedpfxskyrmio Aatjl Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.

Condition: used, machine/vehicle number: 1 284 066, Feed diameter: 200 mm Through-hole: 50 mm Fjdpfx Aajcm Tgkjtspl Mounting, short taper according to DIN 55027: Size 6 Outer diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to the front of the chuck, without jaws): 150 mm pneumatically actuated

Condition: good (used), Position switch, drive for rotary axis actuation, electrical head with rotary axis Fjdpeb A H Sfjfx Aatjpl -Type: ZC2-JE01 Quantity: 10 available Price: per piece -Weight: 0.3 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, Specifications (See Details above for installed options) *Assembleon Philips Topaz Rated CPH Optimal placement rate: 14,000 cph Simultaneous pick Nominal placement rate: 9,000 - 11,000 cph *Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") with Line Sensor Camera QFP 21 mm with pin pitch down to 0.65 mm (25 mil) Line sensor camera system QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system *Max. component height: 6.5 mm *Philips Topaz Mounting accuracy: (x,y) 3s 0.08 mm for chips and SOIC Line sensor camera system 0.06 mm for QFPs Using Precision Head and optional Area CCD camera system *Mounting angle: 0 up to ± 180 (steps of 0.01) *Alignment system: Line sensor camera with front lighting system for Vision-on-the-Fly image processing by VICS 2500 proprietary vision system -Second Line sensor camera for rear side is optional Fjdpfx Aaoznmfaetjpl -Area CCD camera for fine pitch components Optional -Area CCD camera for fiducial alignment Standard *Type of nozzles: Type 31 Type 31-1 (Precision Head only, spring loaded) Type 32-2 Type 33 Type 34 Type MELF -The nozzle types for Topaz and Emerald are the same. *Nozzle exchange station: 12 nozzle positions Optional (No nozzles included) *Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head *Placement heads actuation method: Pneumatic or servo controlled for component height compensation *Number of Tape Feeders: 8 mm: 100 positions 12 mm: 48 positions 16 mm: 48 positions 24 mm: 32 positions 32 mm: 32 positions 44 mm: 24 positions 56 mm: 18 positions Stick feeders: Depends on stick dimensions Bulk feeders: 100 x 8 mm positions General Specifications *Component Packaging: Tape according to IEC/EIA-J/JEDEC: 8-56 mm Tape reel diameter max: 380mm (15") *Manual Tray feeder: Max. tray size 320 mm x 320 mm (12.6" x 12.6") Optional: Manual tray feeder *Fixed Manual Tray Feeder: Max. tray size 635 mm x 136 mm (25" x 5.3") Optional: Fixed manual tray feeder (Max. board size 250 mm (10") -Optional 558 mm x 508 mm (22" x 20"). *PCB Thickness: Min. 0.6 mm (0.02") Max. 3.0 mm (0.12") *Non-mountable area: -Board Top side: 3 mm from rear side board edge (0.12") 0 mm from front side board edge 3 mm around reference holes (0.12") (for locating pins) Component height restrictions apply in the 10 mm (0.4") area from front side edge depending on board thickness -Board bottom side: 5 mm from front and rear side board edge (0.2") For Ceramic boards (optional) the non-mountable area can be different *PCB Material: Phenolic/FR4/Composite Materials Ceramic boards require special conveyor sections (optional) *PCB Positioning: Locate pin fixation Adjustable Push up pins Adjustable Edge clamping Adjustable Sub stop (PCB waiting buffer) Adjustable *PCB Transport height: 900 mm ± 10 mm (35.4" ± 0.4") Standard SMEMA 953 mm ± 12.5 mm (37.5" ± 0.5") Standard *PCB Ratio width/length: Max. 1:3 *Philips Topaz Machine dimensions and weight: Length: 1655 mm (5.4 ft) Height: 1865 mm (6.1 ft) Width: 1358 mm (4.5 ft) Width including feeders 2194mm (7.2 ft) Weight: 1150 kg (2535 Lbs)

Condition: new, mileage: 2,628 km, power: 309 kW (420.12 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 13,355 kg, tire size: 315/80R22.5, axle configuration: 6x4, next inspection (TÜV): 06/2027, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6e, suspension: steel, number of seats: 2, total length: 7,650 mm, total width: 2,550 mm, total height: 3,190 mm, loading space length: 4,800 mm, loading space width: 2,410 mm, loading space height: 900 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, seat heater, tachograph, tire pressure monitoring, trailer coupling, truck registration, F - LINE 6X4 KH TIPPER Retarder, LED headlights, aluminum wheels, trailer package, technology package 3 Body description: Length (internal): approx. 4900 mm Width (internal): approx. 2410 mm (pallet width) Side panel height: 900 mm Front panel: approx. 1000 mm (subject to agreement) Subframe: fully tubular, with safety cable, with repair supports, front and rear tipping bearings from Leidinger, secured against accidental reversal Floor: 6 mm Hardox 450 steel Side walls: 4 mm Hardox 450 steel, M-JET design Left: hydraulically folding HYDROBOARD, 2 cylinders under the tipping floor Fjdpfx Aaezk H Rzetepl Right: pivoting and folding, manually locked, with spring relief on the front panel Front panel: 4 mm S 700 steel, with short slope/chute Rear panel: 4 mm Hardox 450 steel, pivoting, opens automatically during the tipping process, with rear chute and dosing device (locking with pin) Stanchions: corner stanchions in a stable, fixed design (BORDMATIK) HYDRAULICS: • chromed tipping cylinders with pneumatic shut-off, manufactured by HYVA • main valve (control block) • pneumatic tipping actuator for the cab • with oil tank • with piston pump • with by-pass valve (due to auxiliary drive on the engine) • tipping trailer hydraulics: 2x pressure and 2x return line • with pneumatic changeover valve for tipper - trailer in the frame Additional equipment: • continuous aluminum mudguards for the 2nd and 3rd axles • tie-down points in the floor, 2 pairs of 8000 daN in the corners, with 4 pairs of folding tie-down points of 2000 daN in between, 1 pair on the front panel • underrun protection, folding, from KH, with spring relief • net hooks • broom and shovel under the floor • tie-down rods in the top rail of the side panels • contour marking Painting: • subframe bead-blasted, primed, and painted in chassis color • tipping body bead-blasted, primed, and painted in cab color

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Fjdpfxszp Iqmj Aatjpl Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: new, For sale: Bernard Controls DEUFRA SQ10 electric valve actuator The device is brand new, unused, from warehouse stock. Ideal for industrial applications, process installations, automation, and valve or damper control. Technical data: Manufacturer: Bernard Controls DEUFRA Model: SQ10 Power supply: 230 V Phase: 1-phase Power: 0.02 kW Frequency: 50 Hz Current: 0.5 A Torque: 100 Nm Speed: approx. 0.43 rpm Industrial-grade design Condition: New, unused, warehouse stock No signs of use Fully functional Additional information: Fpedpfxsyu U Aze Aatsl The price is for one unit

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Fpedpfxstrl R Ae Aatol Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Fpjdpfx Aaetx T Tyetel

Condition: used, functionality: unexamined, machine/vehicle number: Ultraweld-40, input voltage: 220 V, Used Amtech Ultraweld 40 ultrasonic metal welder with parts and controllers Manufacturer: Amtech Fsdpsx A A Exsfx Aatjpl Model: Ultraweld-40 (R4A actuator) Includes manual

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. Fjdpfx Aev Taq Reatepl There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. Fedpfx Aasyl It Ijtepl The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.

Condition: excellent (used), Gericke PTA50 Pneumatic conveying system Fpodpoy Tbfnofx Aatel Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator

Condition: used, functionality: fully functional, Röhm Spannstock SSP 315/3 - ID No. 161508 - Pneumatically actuated stationary clamping block - 3-jaw power chuck - Operating pressure: 6 bar - Clamping force: 111 kN - Outer diameter: 415 mm Fjdpsyuwh Tsfx Aatepl

Condition: used, mileage: 54,477 km, power: 81 kW (110.13 HP), first registration: 11/2020, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 03/2028, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M568----VW T6.1 2.0 TDI MILEAGE: 54,477 KM, SERVICED ACCORDING TO SERVICE SCHEDULE LAST INSPECTION WITH OIL CHANGE ON: 06.02.2026 AT 54,254 KM ALL INSPECTIONS WERE CARRIED OUT IN AN AUTHORIZED DEALER WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT AT 54,472 KM, ON 18.03.2026, THE REAR BRAKE PADS AND BRAKE DISCS WERE REPLACED ----8 TIRES 4 X NEW SUMMER TIRES ON STEEL RIMS 4 X M+S TIRES----* BRAKE ASSIST * CROSSWIND ASSIST * FRONT ASSIST * CRUISE CONTROL * SPEED LIMITER * MULTI-COLLISION BRAKE * PARKING SENSORS FRONT + REAR * REARVIEW CAMERA * NAVIGATION SYSTEM * AUTOMATIC HEADLAMP ADJUSTMENT * SOS BUTTON * AUTOMATICALLY DIMMING REARVIEW MIRROR * AIR CONDITIONING Fsdoyupzxspfx Aatjpl * START/STOP SYSTEM ----SEAT HEATING ----HEATED WINDSCREEN ----CARGO AREA VENTILATION ----FIRE EXTINGUISHER----TIRE LASHING RINGS----VEHICLE EQUIPMENT BY FIRM BOTT SHELVING SYSTEM WITH DRAWERS AND EXTENDABLE WORKBENCH BOTT VARIO FLOOR PANELS 3 DRAWERS 3 DRAWERS, EACH 50 X 35 CM 5 SHELVES 2 SHELVES, 120 X 35 CM 1 SHELF, 100 X 35 CM 1 SHELF, 205 X 25 CM 1 SHELF, 85 X 30 CM 3 X LOCKABLE TOOL BOXES 4 X TOOL BOXES PULL-OUT VICE----* BLUETOOTH HANDS-FREE SYSTEM * APPLE CARPLAY * ANDROID AUTO * VOICE CONTROL * 2 X USB-C * ON-BOARD COMPUTER * 2 X ARMREST DRIVER'S SEAT * ELECTRIC WINDOWS * ELECTRIC AND HEATED DOOR MIRRORS * CABIN PARTITION * 3 SEATS * 12V SOCKET * STORAGE COMPARTMENT * LED CABIN+CARGO AREA ----SPECIAL EQUIPMENT: * Audio-navigation system Discover Media Streaming & Internet (touchscreen, USB) * Equipment package: Light + Sight * Equipment package: Comfort Package Plus * On-board tools and jack * Driving Assistance System: Parking assist front and rear * Driving Assistance System: Area monitoring system (Front Assist) with city emergency braking function * Suspension and damping reinforced * Vehicle without child safety lock in the cargo/passenger compartment * Speed control system (cruise control) incl. speed limiter * Tailgate with glazing * Heated rear window with wiper system * Paint: Metallic paint * Cargo area partition, high, with fixed window * Truck registration * Multifunction display Plus * Tire pressure indicator * Rearview camera * "Transporter" lettering on the fender * Seats in the cabin: double co-driver seat with storage compartment (lockable) in the seat box * Lashing eyes reinforced * Winter package Additional equipment: * Airbag, co-driver's side, can be deactivated * Airbag driver/co-driver side * Anti-slip regulation (ASR) * Exterior mirrors, elect. adjustable and heated * Exterior mirror, convex, left * Exterior mirror, convex, right * Floor covering in the cab: Rubber * Driving Assistance System: Brake assistant (HBA) * Driving Assistance System: Multi-collision brake * Driving Assistance System: Crosswind assist * Windshield laminated glass * Remote control (2) folding * Glove box, lockable * Engine 2.0 Ltr. - 81 kW TDI * Fog light * Non-smoker package * Radio reception digital (DAB+) * Wheelbase 3000 mm * Low emission according to emission standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right * Power steering, electro-mechanical * Steel rims 6.5x16 * Start/stop system engine * Warning system for safety belt (driver's side) * Heat-insulating glazing * Central locking with remote control and interior actuation * Permissible total weight 2.80 t ----++ Exclusive

Condition: used, power: 78 kW (106.05 HP), first registration: 12/2025, fuel type: gasoline, axle configuration: 4x2, color: white, gearing type: mechanical, suspension: steel, Leaf spring suspension, UNIQUE UNIT - ZERO-MILE VEHICLE - REGISTERED 12/17/2025 - SHORT RANGE LPG (15L) - DUAL REAR WHEEL - WHEELBASE 3250mm - OPTIMIZED PAYLOAD 550 Kg - WHITE COLOR - REAR TIPPER BODY: 2300x1800mm - PM 2821 CRANE - TOP EQUIPMENT: DAB radio, Manual air conditioning, Electrically heated, folding, and adjustable exterior mirrors, Passenger airbag, Body-colored front bumper, Fog lights - VEHICLE AVAILABLE SUBJECT TO PRIOR SALE - TIPPER BODY FEATURES: - Chiarvesio-built rear tipper body, 2300x1800 mm (external dimensions) - L-shaped sideboards, 400 mm high, with 180-degree lateral opening, and rear opening from below/above - 30/10 sheet metal floor - 01 front pole holder - 01 galvanized 400mm tool box - Fenders - 1+1 winches - rear light grilles CRANE FEATURES: - model PM 2821 - 02 manually extendable stabilizers - 01 hydraulic extension - 02 additional actuators - bilateral 6-element controls - 01 swivel hook - 200 rotation buffers (the crane does not operate above the cab) Fpedpfxszf Sbuj Aatsl

Condition: excellent (used), functionality: fully functional, SPX APV & ALFA LAVAL | Industrial CIP Valve Manifold (Hybrid Process Valve Block on a Frame) Manufacturers: SPX FLOW / APV and ALFA LAVAL Model / System Type: DELTA / UNIQUE MIXPROOF (Integrated single- and double-seat valve block) Control Heads: SPX APV (CU4 series model, including CU41N S AS-i) Control Heads and Actuators: ALFA LAVAL Main Component Identifier: Olympia BE-0112005 / DS53XVE03 Configuration Factory Code: 13085-089614-E Power and Communication: Industrial AS-Interface network bus, pneumatic actuator power supply Construction Material: AISI 316L / 1.4404 grade stainless steel Supporting Structure: Factory-made stainless steel support frame with adjustable leveling feet This professional, hybrid valve manifold, based on components from SPX APV and Alfa Laval, represents a top-class industrial distribution hub. This device is the absolute core of liquid flow management systems, automatic process distributors, and advanced CIP (Cleaning In Place) stations. This type of valve block is a key pillar of infrastructure in large and medium-sized dairy plants, breweries, fruit and vegetable processing plants (juice, beverage, and concentrate production), as well as in the production of liquid ready meals, sauces, and in the chemical and food industry. The use of Mixproof technology (double-seat valves) from Alfa Laval, combined with SPX APV CU4 digital control, solves one of the biggest problems in liquid logistics: it allows the simultaneous flow of two completely different media (e.g., a finished food product and an aggressive cleaning agent, such as lye or acid) through a single valve block, without any risk of cross-contamination. When switching, special drain chambers immediately remove any remaining residue, providing a 100% guarantee of microbiological cleanliness. Thanks to AS-Interface communication, the manifold transmits real-time feedback signals about the exact position of each valve seat directly to the main PLC controller (e.g., Siemens S7). This prevents operator errors, reduces technological downtime, and allows for the simultaneous cleaning of one section of the pipeline while continuous production continues on the other. The compact mounting of the entire unit on a sturdy, stainless steel frame (so-called skid construction) dramatically reduces installation costs in a new or modernized plant. Key features and advantages: - Hybrid of best technologies (SPX APV + Alfa Laval): Combines the mechanical reliability and sealing of Alfa Laval stainless steel with the advanced control and monitoring electronics of the APV DELTA CU4 series. Fpjdpey Ufglsfx Aatjl - Quick installation and space saving: A complete, compact valve block mounted on a stable mounting frame – delivered as a plug-and-play unit, minimizing the time required for line modernization.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Fodszdkttjpfx Aatepl Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm External dimensions: Width: 1900 mm Length: 2750 mm Height: 580 mm Fodezdrbxspfx Aatspl Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Please see my other listings.

Condition: excellent (used), Stäubli Measuring Robot Here we offer a well-maintained Stäubli measuring robot. Measuring robotics for measuring, analyzing, and evaluating quality characteristics. RobFlow (measuring robotics software) Full version and dongle on integrated Siemens industrial PC 6AG4114-1NC22-4EX0 Laser distance sensor Model ILR 1181-30 Technical data: Measuring range 0.1 … 50 m on natural, diffusely reflecting surfaces, 50 m up to a maximum of 150 m on reflector plate Linearity ±2 mm (+15°C … +30°C), ±5 mm (-10°C … +50°C) Resolution 0.1 mm Repeatability ≤ 0.5 mm Response time 100 ms ... 6 s (ILR 1181-30) 20 ms ... 6 s (ILR 1182-30) Laser according to IEC 825-1 / EN 60825 Red 650 nm, laser protection class 2, power ≤ 1 mW Beam diameter < 11 mm at 10 m distance Beam diameter < 35 mm at 50 m distance Beam diameter < 65 mm at 100 m distance Laser divergence 0.6 mrad Operating temperature -10°C … +50°C Storage temperature -20°C … +70°C Applications: RobFlow is a modular system. The scope of functions of the standard package can be supplemented with additional plugins for specific tasks as well as customer-specific extensions. With the help of the available functions, the following applications can be implemented, for example: Infotainment testing: Optical and haptic tests Individual actuations and path movements straight, meandering, curve segments Analysis and evaluation functions Steering column tests: Haptic tests along complex paths Large measuring range thanks to multi-calibrated force/torque sensor Easy to program thanks to RobFlow Air vent end-of-line tests: Haptic and optical tests Interchangeable test adapters for a wide range of devices Automatic testing, evaluation and marking including integrated leak test Vehicle seat tests: Fedpfx Aszdyt Asatspl Functional and haptic tests Headrest distance measurements Comfort and stiffness evaluations Service life and fatigue tests The advantages of RobFlow at a glance: User-friendly operation No programming language knowledge required Variable and dynamic test sequences Branched process control Easy exchange of test programs between development and production Extensive analysis and evaluation functions Graphical display of measurement data and report generation Flexible and extensible through plug-in architecture Stäubli robot RX160 with 379 operating hours Controller CS8C RX160 Lifting capacity (nominal load - kg) 20 kg and handheld device SP1 Total weight 500 kg Type: Stäubli Robot RX160 with controller CS8C, handheld device, software, PC Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have on the phone.