Used Feed Unit For Planing Machines for sale (86,641)

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame Dedpfx Afjh Alh Re Aeci - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: Dcsdpfx Aeh Alh Uef Aei - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400 Technical specifications Shaft Diameter: 80mm Roll diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min. Bending performances (cross-section / min. diameter): Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300 Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm gear 3 motorized rollers stable welded steel construction hydraulic Adjustment of the two bottom rollers Digital display of the bottom roller positions on a separate control panel lateral straightening rollers adjustable in 3 axes can be used horizontally and vertically Forward and reverse drive Machine and equipment according to CE regulations Options: Dcodped Ab H Tofx Af Asi NC Unit 7 Screen  EURO 9.000,-- We have more than 190 references!

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA K CCC 1350, year 2004. Configuration: 55 KW steel calibration cylinder 45 KW hard rubber cylinder 37 KW soft rubber cylinder. Dcedpfjt Rn E Tex Af Aoi Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. 3 motors 55 + 45 + 37kW Including full documentation. Condition very good ! Available immediately.

Condition: used, used, in top condition with new feed rollers cleaned, function-tested, trial run Brand: Holzher Type: ETZ Machine no.: 24098 Motor with pole switching, 2 speeds 2 / 0.75 kW Roller diameter 110 mm Roller width 50 mm Feed rollers: 3 pieces Dcodjy Dh R Eepfx Af Aji Speeds: 8 steps, 2-30 m/min. Space requirement approx. 1300 x 500 x 800 mm Storage location: 97447 Gerolzhofen, loaded free of charge, unpacked Transfer in as-is condition, as inspected and function-tested, without overhaul, without warranty or liability

Condition: used, used, in top condition Manufacturer: Holzher Type: 1112 Machine no.: 49474-FD24 Motor with pole changing, 2 speeds, 0.75 kW Roller diameter: 110 mm Roller width: 50 mm Feed rollers: 4 pcs with stand Dcjdpfx Afjy Dh Rrs Aji Speeds: 8 steps, 2-30 m/min Required space approx. 1300 x 500 x 800 mm Stock location: 97447 Gerolzhofen, loaded free on truck, unpacked Handed over as is, as inspected, function tested, without overhaul, without warranty or guarantee

Condition: used, used, in top condition Cleaned, functionality tested, test run, partially refurbished. Manufacturer: Samco Type: Euro-Uno Roller diameter 120 mm Roller width 50 mm Feed rollers: 4 units All 4 rollers replaced Continuously adjustable Space requirement approx. 1000 mm x 800 mm x 800 mm Total connected load 0.6 kW Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected, without warranty or guarantee Dsdpfx Aev D Rhbof Aoci

Condition: used, Year of construction: 2019, used, top condition, low hours with Tersa cutterblock Make: SCM-Minimax Model: FS41C Year of manufacture: 2019 Machine No.: KK00003566 CE type-tested Motor: 5 kW Planing width approx. 410 mm Planing height approx. 220 mm Table length approx. 900/900/1800 mm Dsdpsy Apfuofx Af Aeci Bridge guard Slotted table lips Low-noise table lips automatic brake Number of knives: 3 pcs Knife system: - Tersa reversible knives Digital display for planing height, analog Integrated extraction hood Original price approx. 5500 € Extraction connection: 2 x 120 mm diameter Space requirement approx. 2000 x 800 x 1000 mm Weight approx. 320 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, without any warranty or guarantee.

Condition: used, CNC control unit for the operator panel / machine operator terminal CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg Dodpfx Aolb I D Tof Asci From a GILDEMEISTER CNC lathe. From stock, function not tested, ideal as a source of spare parts.

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Dcjdjhxvu Eepfx Af Asi Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Rotation radius at full reach: max. 360° Dcjdpfxsfx Hyfj Af Aji Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide Dcsdpfxedzqltj Af Aji - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Dodpfodzqb Eex Af Aoci Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Dcsdpfx Afjg D H Rus Aei Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Dcedpfxjthuzps Af Aji Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding Dcjdpfog U A Uzjx Af Aoi - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine No. 14 561-06, Year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Dcsdpfx Ajf Ncadsf Asi Track height: 650 mm 2x machine cutting torches with cutting table

Condition: used, Wig welding machine, WIG welding system NIMAK Type GS 200 W Dcsdpfxsdzqbvj Af Aei WIG and DC electrode welding machine, also suitable for stick electrodes Manufacturer's No. 26642, year of manufacture approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Adjustable output range: continuously variable Mains connection: 380 volts, 50 Hz, 32 amps plug - 5 meter WIG hose assembly - HF ignition - Continuous current control and current increase - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space requirement L x W x H: 900 x 590 x 1000 mm Weight: approx. 200 kg In good condition

Condition: good (used), functionality: fully functional, 4-roller feed unit STEFF 2048 automatic arm Specification: • Condition – used, after inspection • Manufacturer – STEFF • Model – 2048 • 4 new feed rollers, size 120x60 • Forward/reverse rotation Dsdpfx Afsxxbh Re Aeci • Speed control by switch and gears • Motor powered by 380V (3-phase) electricity • 8 working speeds ranging from 2.0 to 33.0 m/min • Automated height and feed position adjustment (electric motors) • Weight approx. 70 kg Additional information: • Good technical condition • The attached photos show the actual state of the item for sale • Possibility to turn on and test the device on site

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump Dcjdeu Tln Nopfx Af Aji - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Dcsdpfxovptz Is Af Aji Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: EE425200, paper weight (max.): 400 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 380 V, Purchased in working condition and transferred to our warehouse. It is currently not in working condition. Ink and water rollers need to be replaced soon. Simultaneous front and back printing is possible. Very suitable for book printing. Dcedjy Emmzepfx Af Aei

Condition: good (used), Year of construction: 1966, functionality: fully functional, Milling fence with fine adjustment Sliding table Crosscut saw Aigner table extension with Holz-Her ETZ feed unit, 8 speeds 380 Volt Shipping possible at extra cost! Dcodjx U Dfgopfx Af Aji

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, working width: 300 mm, number of spindles: 10, No minimum price – guaranteed sale to the highest bidder! The machine can be used either as a standalone unit or as part of a complete system: - Joulin vacuum lifter + stacking task & feeding (Search ID: 21264612) - Canali ML 1100 TWIN F.L. 30 H.S. band resaw (Search ID: 21264817) TECHNICAL DETAILS Dedpfoyk Tvlox Af Aeci Working width: 300 mm Feed rate: 140 m/min to 200 m/min MACHINE DETAILS Spindle configuration: Horizontal spindle Right vertical lift spindle Left vertical lift spindle Horizontal lift spindle Right vertical lift spindle Left vertical lift spindle Top horizontal spindle Bottom horizontal spindle Bottom horizontal spindle Bottom horizontal jointer spindle EQUIPMENT 10 spindles Multiple lift spindle system NC control All spindles with support bearings (hydraulic clamping) Planer table Precision work in terms of dimension and angle

Condition: new, Year of construction: 2025, The Cormak planer-smoother is a solid and well-thought-out design that offers a lot of possibilities in woodworking. Dcedpfx Afovughrj Aoi Machine description Their task is to give the surfaces the right flatness in order to subject them to further processing stages. The large weight of the machine (105 kg net) ensures great stability, which guarantees safe operation without vibrations. ADVANTAGES free access to the safety switch located on the arm! table made of high-quality cast iron, ground ideal model for precise planing, leveling sides, boards, strips, beams very good quality of processing is ensured by a three-knife head the shaft cover can be freely adjusted by changing its height, angle and extension stable limiter, which helps to achieve optimal work results additional silencers have been used in the planer tables to reduce the noise level easy setting of chip collection using a hand wheel strong and stable construction will meet the requirements of not only ambitious DIY enthusiasts but also professional craftsmen. Technical parameters Engine power S1 1.1 kW; S6 1.5 kW Power supply 230V Engine speed 2850 rpm Maximum working width 152 mm Maximum planing depth 13 mm Shaft speed 4500 rpm Number of knives in the shaft 3 Knife dimensions 17x153x3 mm Shaft diameter Ø62 mm Swing ruler tilt angle 0°-45° Worktable dimensions 1210 x 185 mm Diameter of exhaust port Ø100 mm Weight approx. 105 kg Dimensions 1195 x 530 x 1150 mm The price given is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.