Used Hydrap Hpsk 25 for sale (14,914)

Condition: ready for operation (used), Bosch ASM 25-TD / Servo module SN: 001296345 without control card, used, good condition, 100% fully functional, delivery scope as per photos Itedpfx Aoy Np E Ujcrsh

Condition: ready for operation (used), Brinkmann TC 25 / 810 + 001 submersible pump 10 L / min No. - 002, used, slight signs of wear, 100% functional, scope of delivery as per photos Itjdpfx Aoi D Hmdjcroh

Condition: ready for operation (used), MMK ZKV170/55-25-08 drawbar L = 1070 mm, flange diameter: 155 or 205 mm, tube diameter: 62 mm, tube length: 595 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itjdpji Eb Rfjfx Acrsh

Condition: used, power capacity / kW volt / V ampere / A KNOLL KTS 25-50-T screw pump incl. Siemens 1LA7130-2AA11 Iodpfjzcgl Dsx Acrjth The parts were dismantled from systems that were in operation until decommissioning or come from a stock clearance. Weight: approx. 80kg

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Rotor width: Isdpjyr Ttysfx Acroth Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: good (used), Year of construction: 2016, 2x screw compressors, Kaeser, 10 bar, with integrated refrigerant dryer, compressed air tank, SIGMA AIR MANAGER 4.0 control system – used: Iodpjzbyd Refx Acrsth Price per compressor, ex-works: €5,950 (net), dismantled, packaged, and loaded! Price for the compressed air tank, ex-works: €1,450 (net), dismantled, packaged, and loaded! SIGMA AIR MANAGER 4.0 main control system, price ex-works: €2,500 (net)! Price for the complete system (2x compressors, 1x compressed air tank, 1x SIGMA AIR MANAGER 4.0 control system) = only €13,500 (net)! Manufacturer: Kaeser Type: SK 25 T Year of manufacture: 2016 Serial No.: 7201 Material No. SK.2 Operating hours: unknown, will be provided later Rated power: 15.0 kW Motor speed: 2,960 1/min Max. operating overpressure: 11.0 bar Dimensions (according to manufacturer's data sheet) W x D x H (mm) 750 x 1240 x 1260 Option K1 T2 C3 Option K1: Special coolant filling Option T2: Transformer / voltage adjustment Option C3: Connection of the control system (Sigma Control 2) to higher-level control or remote monitoring systems SIGMA AIR MANAGER 4.0 main control system: Control of compressed air stations – for optimum efficiency. Adaptive, efficient, and networked – with the SIGMA AIR MANAGER 4.0, demand-oriented compressed air management gets a new name. The compressed air management system controls the operation of several compressors as well as dryers or filters with unprecedented efficiency. Compressed air tank (data still to be verified) Kaeser, 1000L, max. operating pressure: 11 bar Condition: good Available: from Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Manufacturer: Krones / Krones Zierk GmbH Model / Type: K6W-25-S-E Machine Type: Crate washing machine Year of Manufacture: 2000 Application: Washing / cleaning of beverage crates Construction: Stainless steel machine housing and frame Conveyor System: Integrated slat-chain conveyor and crate transport sections Drive System: Electric drive motor with gearbox Inspection Access: Viewing window with safety latch hooks Control System: Integrated electrical control cabinet Operator Panel: Push-buttons, indicator lights and red rotary main switch Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A Itjdpjzb Ad Tjfx Acrsh

Condition: excellent (used), Year of construction: 1985, pressure 25 t Itodpfx Aozbu Spjcroh

Condition: new, Year of construction: 2026, Spiral mixer with 2 speed . 25 kg dough.Digital keyboard . Bowls direction option. Stainless spiral arm. Option 50-80 kg dough Itsdpfx Aeh Unwvjcreh

Condition: good (used), Year of construction: 2006, Press force: 135 t Itodey H Ilbopfx Acrjh Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Installation height: 340 mm Rapid down speed: 220 mm/s Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Standard equipment: Basic features: • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system • CE standard Iodpeyz Sw Rsfx Acrjth

Condition: good (used), Year of construction: 1982, Oven, heating oven, heating chamber, heating cabinet, hardening oven, annealing oven -Manufacturer:Artur Nolzen, Chamber dryer oven type KTS 53/30/70 -Temperature: max. 1100 °C Itodpfxjzbrx Ho Acroh -Chamber size: 710 x 535 x 300 mm -Heating output: 25 kW -Automatic temperature control -Individual components: see photos -Dimensions: 1630/1530/H1700 mm -Weight: 1698 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, input voltage: 1,10,000 V, nominal power (apparent): 20,000 kVA, secondary voltage: 20,000 V, For sale is a high-performance power transformer from the renowned manufacturer ALSTOM. This unit is ideal for industrial power grids or as a redundancy transformer for grid operators. Key technical features: - Power rating: 20 MVA (20,000 kVA), upgradable to 25 MVA - Voltage: 110,000 V (HV) / 20,000 V (MV) / 10,000 V (LV) - Year of manufacture: 2001 (Type TC1743G) - Cooling: ONAN (option to upgrade to ONAF) - Tap changer: Equipped with high-quality MR on-load tap changer with 19 steps Weight specifications: Iedpfx Aoyzl T Secroth - Total operational weight (incl. oil): 40.8 t - Dry weight (without oil): approx. 29.3 t Optional accessories such as switchgear and instrument transformers are available upon request. Condition & Service Options: The transformer is in operational condition. To ensure maximum operational safety, we offer the following options: ✅ Complete overhaul: Full technical refurbishment on request ✅ New paintwork: Professional repainting available Location: Cloppenburg Price: Negotiable / open to offers For inquiries or detailed documentation (test protocols, dimension sheets), please contact us. An inspection can be arranged by appointment.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Iodey Avnpjpfx Acrsth Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Iedpfozcznyjx Acroth Dimension : 110 x 103 x 150 cm Technical documentation available

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 14,831 h, load capacity: 2,500 kg, lifting height: 3,170 mm, fuel type: electric, mast type: simplex, construction height: 2,275 mm, drive type: Elektro, Electric four-wheel forklift ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery voltage: 80V Battery year of manufacture: 2021 Iedpfxjzc A Dpo Acrsth Side shifter, fork positioner 3rd valve, 4th valve

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3,950 kg, maximum load weight: 31,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,930 mm, suspension: air, tire size: 385/65r22.5, tire condition: 100 %, Additional Information Chassis Fine-grain steel welded construction, lightweight design, kingpin plate with 2 replaceable kingpins Curved front end, patented Telescopic support in the center; uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backwards. 2 chock blocks + holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface repels stones With anti-splash flaps, only on the last axle 1 tarpaulin rod + bracket 2 towing hooks at the rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance; operated by 3x braking (start-up assistance functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle driving stability system Automatic tilting lowering with shut-off valve Wheels & Tires 385/65R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage with hard chrome plating, with HDK threaded sleeve, fixed part, NW 48 mm (without hose connection) Actuation via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents bulk material from spilling. Interior with ladder on the front wall Shovel and broom holder on the outside of the front wall Itodpfxoi Ri R Io Acreh Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing gate with double-joint hinge, externally mounted with a double hook locking system Rear wall with rubber seal. Note: Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connecting plate for air/electrical system and brake with ample space for optimal operation Roll cover on one side for depositing on the right-hand side, with central locking on the left-hand side Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not corroded or rusted by the material. The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of registration / Signs Germany Type approval according to EG 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space width: 2,420 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with 2 interchangeable kingpins Curved front panel, patented Without support leg Chocks + holder Under-run protection, foldable Half-shell mudguards Integrated mudguard holder, surface resistant to stone chipping Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid, operated via 3x brakes (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Ijdji Ri H Sopfx Acreth Hot-dip galvanized lift axle mechanism Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable With lifting and lowering valve Vehicle driving stability system Wheels & Tires 385/65 R22.5, manufacturer's choice Aluminum rim, polished, manufacturer's choice Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm. Actuation via truck auxiliary drive Tipping body Sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with an upper edge profile that prevents spillage. Inside with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipping body shape Membrane - rear wall Rear wall as a hinged flap with double-joint hinge, mounted externally with double hook locking Rear wall with rubber seal. Note! Heat resistant up to max. 170°C! Floor, continuous 5 mm thick, Brinell 110. Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connection plate for air/electricity & brake with large clearance for the best possible operation. Rollover tarp, single-sided, for storage on the right side, with central locking on the left side Operating instructions For the transport of salt, lime, etc., we recommend a tilting cylinder with a hard-chrome plated piston rod to protect against rust. The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and fifth wheel loads. (Poor driving and tracking behavior due to incorrect load distribution is possible) Country of approval / Signs Germany With Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau Tipping body R

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,350 kg, maximum load weight: 33,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,650 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More Information Chassis, Semi-trailer, Tipping Trailer Fine-grained steel welded construction, in basic lightweight design, kingpin plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center; uncoupling with load is not possible; when uncoupled, the vehicle must lean backward. Wedge blocks with holder Itedpfsi Ri Dpsx Acroh Underrun protection, foldable Half-shell fenders Integrated fender holder, surface resistant to stone chipping Tarp pole with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned for reduced tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rusting Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 plug-in connectors at the front, non-interchangeable, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle – Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the tractor unit, via EBS, without truck installation (this must be available in the truck. Only for standard tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, synchronized with the turn signal ("flashing side lights") 2 x 7-pole plug-in connectors at the front, non-interchangeable, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder and ladder on the front wall. Greenline – conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane – Rear Wall Rear wall as a pivoting flap with double-joint hinge, externally supported with 2-fold hook locking. 2 clamping screws with cam locks at the bottom on the sides. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with ladder, connection plate for air/electrical system and brake with ample space for optimal operation. Roll tarp, one-sided for storage on the right side, with central locking on the left side Country of Registration / Signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 Service Hotline Prepared for license plate holder, single row Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year warranty against rusting" Support legs: galvanized Body: RAL color of your choice, solid color Roll tarp: RAL 7035 light gray

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grained steel welded structure, lightweight design, fifth wheel with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center; uncoupling with load is not possible; when uncoupled, the vehicle must lean backwards. Support wedges + holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones Splash flaps behind the last axle in asphalt design, attached to the fender with a hinge, with the option to be hooked onto the top of the fender, shortened fender Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, incl. forced lowering and start-assist Hot-dip galvanized lift axle mechanism Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve Vehicle driving stability system Wheels & Tires 385/65R22.5 Steel rims, factory silver "TPMS" according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be a prerequisite in the truck. Only for base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides coupled with the turn signal "flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin tamper-proof sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Body Steel round body, Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Membrane back wall Rear wall as a swing gate, externally mounted with double hook locking. 2 clamping screws with cam locks on the sides at the bottom. Side walls continuous 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Body in insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform + access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Itodpfx Aei Rix Ijcreh Roll-up cover on one side for stowing on the right side, with central locking on the left side Country of registration/signage Germany Test approval according to EC 2007/46 Body stability according to EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles according to RS 10 - 2013 prepared for license plate holder, single-row Warning sign according to ECE - 70 Paintwork Frame DB 7350 Novagrau "10 years warranty against rust perforation" Support feet galvanized Body/ Side tarpaulin RAL color, solid color Roll-up cover RAL 7035 light gray Thermal insulation a

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Isdoi Ri Nfjpfx Acrjth Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in a basic lightweight design, drawbar plate with 2 interchangeable kingpins Curved front closure, patented 24 tons, 2-speed landing gear, single-sided operation, with a straight lower part, without thrust compensation Underrun protection, foldable Half-shell fenders Tow hitch at the rear Axles + suspension SAF disc brake axles with a 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rusting Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the tractor unit's display, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side marker lights") 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Steel round tipper body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders and a ladder on the front wall. Greenline - conical and aerodynamic tipper body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a pivoting flap with a double-hinge hinge, externally mounted with 2-fold hook lock. 2 clamping screws with cam locks on the sides at the bottom. Side walls are continuously 4 mm thick, floor is 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connecting plate for air/electricity and brakes with ample space for optimal operation. Rolltarp, one-sided for storage on the right, with central locking on the left Registration country/signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single-row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rusting Support legs, black coated Tipper body, RAL color of your choice, solid color Rolltarp, RAL color of your choice, solid color Available in a thermally insulated version!

Condition: good (used), Year of construction: 2017, operating hours: 1,778 h, lifting height: 4,800 mm, free lift: 1,180 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, Weights Empty weight: 4.540 kg Functional Lifting capacity: 2.500 kg Maximum passing height: 223 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Fork carriage: Sideshifter Transport dimensions (LxWxH): 3,63x1,15x2,23 Latest inspection: 2024-10-24 Production country: TR Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Free lift - Pneumatic shaped solids = Remarks = Zoomlion FB25 * 2017 * Battery powered * 1778 working hours * Sideshift * 1200 mm pallet forks * 4.8 meter lifting height Itjdpfxswwtbpj Acrsh * 2500 kg lifting capacity * 4540 kg net weight * including documents

Condition: excellent (used), mileage: 30,191 km, color: white, lifting height: 30,000 mm, Year of construction: 2006, operating hours: 1,136 h, General information Field of application: Construction Drivetrain Drive: Wheel Weights Empty weight: 7.450 kg Functional Lifting capacity: 1.300 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Transport dimensions (LxWxH): 8,6x2,3x3,2 Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks Isdpfx Aceyi Hdgsrjth = Remarks = Klaas K 25-30 TS * 2006 * Diesel drive * 1136 working hours * Equipped with a man basket * Refurbished remote control * 30-meter working height * 25-meter horizontal reach * 1300 kg lifting capacity * 30,191 km * 7,450 kg net weight

Condition: excellent (used), color: orange, lifting height: 25,500 mm, Year of construction: 2007, operating hours: 9,654 h, Drivetrain Make of engine: Volvo Weights Empty weight: 18.000 kg Functional Lifting capacity: 25.000 kg CE mark: yes Ijdjy Amyvspfx Acrjth Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2025-12-16 Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Ecopower MGI 25 Telescopic Crane * 2007 * 9,654 operating hours * Diesel drive * 4x4x4 steering * Pick and Carry function up to 9,500 kg * 25,000 kg lifting capacity * 18,000 kg own weight * equipped with jib * TUV inspection valid until December 2026 * TCVT inspection valid until December 2027 * Agricultural vehicle 25KM * Includes maintenance history and documents

Condition: good (used), Year of construction: 2013, operating hours: 3,542 h, mast type: telescopic, fuel type: diesel, color: yellow, Drivetrain Drive: Track Weights Empty weight: 3.760 kg Functional Lifting capacity: 200 kg Working height: 2.520 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Isdpfx Aceq R Ubuorsth Max. horizontal reach: 1800 m Additional information Please contact Vink Machinery for more information Teupen Leo 25 T * 2013 * 25 meters Working height * 23 meters Lifting height * 18 meter range! * Very complete and in very neat condition!