Used Ibonhart Ibonhart Horizontal Packaging Machine for sale (71,830)

Condition: good (used), Year of construction: 2010, 5-axis machining center 2000x4000 complete with suction cups and aggregates Hsdpfx Aisy Rai To Djfg

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table Hodsx Hn D Rjpfx Ai Djfg - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Hedpfxjx Hn D Ds Ai Djfg Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC-Steuerung Control: Fanuc 31i - A Hedpfx Aiexvw I Is Defg Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Hodpfx Asxvw Izji Dofg Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC-Steuerung Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Hfjdpoxxpbxjfx Ai Dog Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Condition: ready for operation (used), functionality: fully functional, product height (max.): 400 mm, product width (max.): 450 mm, Shrink film packaging machine Manufacturer: Kallfass Model: Pack JET 1000/450 SIM + Universal 450 N Hjdpjyinzgefx Ai Dsfg CE marking Packaging line for transport packaging / film wrapping of, among other things, profiled wood, mouldings, etc. The system comes from a flooring and panel manufacturing plant. Comprises: - Infeed roller conveyors - Film wrapping/sealing machine - Shrink tunnel - Outfeed roller conveyors Passage width approx. 450 mm Passage height approx. 400 mm Feed rate steplessly adjustable, max. approx. 20 m/min. Compressed air: 6 bar Includes several rolls of packaging film, as available

Condition: good (used), Year of construction: 2006, functionality: fully functional, Manufacturer: Toyota Model: FH 550 Control: Fanuc Year of manufacture: 2006 X-axis travel: 750 mm Y-axis travel: 800 mm Z-axis travel: 850 mm Pallet size: 550 x 500 mm Spindle speed: 15,000 rpm Spindle power: 21.6 kW Hfedoy R Sc Sopfx Ai Dsg Tool changer: 49 positions Tool holder: Equipment Knoll high-pressure coolant system Tool breakage detection Space requirement approx.: 3800 x 5700 x 2770 mm Weight approx.: 16,000 kg

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, Hfjdjy E Np Sjpfx Ai Djg 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Hjdpfjy Edzvjx Ai Djfg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control unit: MSX 701-III Technical specifications: Travel distances X-Y-Z: 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2200 kg Max. workpiece diameter: 1450 mm Max. workpiece height: 1450 mm Spindle speed: 8000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Hodoyrdn Uopfx Ai Dofg Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1300 mm Distance between pallet center and spindle nose: 100–1450 mm Total power consumption: 86 kVA Machine dimensions: approx. 7200 x 4300 x 3850 mm Transport dimensions machine: approx. 7000 x 3400 x 3300 mm Machine weight: approx. 30 t Total weight incl. magazine and accessories: approx. 37 t Scope of delivery includes: 1x Mori Seiki NH8000 DCG machine 1x Matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer Various tool holders

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 48 kVA, torque: 143 Nm, controller manufacturer: SIEMENS, controller model: 840D power line, workpiece height (max.): 800 mm, workpiece diameter (max.): 850 mm, workpiece weight (max.): 500 kg, total height: 3,700 mm, total length: 6,500 mm, total width: 3,300 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (min.): 45 rpm, spindle speed (max.): 16,000 rpm, coolant supply: 70 bar, spindle motor power: 30 W, number of slots in tool magazine: 80, tool length: 320 mm, tool diameter: 150 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HELLER MCi16 840Dpl • Year of manufacture: 2000 • Tool holder: HSK63 • Max. tool length: 320 mm • Chip-to-chip time: 2.8 s • Spindle power: 40 kW • Spindle speed: 45 - 16,000 rpm • B-axis: NC axis (360,000 x 0.001) • Travel X, Y, Z: 630 mm • Rapid traverse speed X, Y, Z: 40 m/min • Feed rate X, Y, Z: 40 m/min • Feed forces X, Y, Z: 10,000 N • Acceleration: 7 m/(s²) • Pallet changer: double (change height 800 mm) • Magazine: chain magazine with 80 positions • 2nd control panel at magazine loading station • Hydraulic workpiece clamping • BLUM touch probe receiver • Interface for 5th axis Hfsdoy Rn H Hepfx Ai Djg • SIEMENS PCU • KNOLL VFR (vacuum rotary filter) system and chip conveyor • Coolant chiller unit • Oil mist extraction The machine has been used exclusively for finishing aluminum components and is being removed from production due to capacity reasons. Our company specializes in HELLER machine tools, and the above-mentioned machine has been serviced by us in recent years. A condition assessment was performed on-site and can be provided upon request. The spindle’s tool clamping system was replaced in 2025. The result of the machine geometry measurement will be provided as soon as available. The machine can be inspected under power by serious prospective buyers by prior arrangement. Location: 72379 Hechingen, Baden-Württemberg, ex works

Condition: used, Year of construction: 2020, Becker BZ-2 - Packaging System - 2 identical, mirror-inverted packaging lines available Hedpfx Aieygipmj Djfg - without cutting machine - Year of manufacture: 2020 The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine. The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line. The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system. Machine components (see schematic): (1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: Packaging Dimensions (top closure): - min. carton dimensions LxWxH: 500 x 120 x 100 mm - max. carton dimensions LxWxH: 2250 x 420 x 320 mm - max. product weight: 50 kg Packaging Dimensions (side closure): - min. carton dimensions LxWxH: 300 x 150 x 120 mm - max. carton dimensions LxWxH: 1050 x 620 x 470 mm - max. product weight: 50 kg Installation: - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Pre-fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min - Sound pressure level: < 70 dB(A) - Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 Hfjdpfxsy Er Tgs Ai Djg total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: used, Year of construction: 2022, Cartoner including hot melt applicator. This device has a low operating hour count. It is particularly suitable for products that can be fed into the carton from the side. Hedpfx Aievb E Evj Dofg

Condition: new, Year of construction: 2023, operating hours: 10 h, !! We would be happy to advise you!! Model name ////: Rotection cartoner Features ////: Double servo feed control, with hot melt station, safety enclosure and safety technology Production orientation ////: Horizontal Conveyor system ////: Fan conveyor belt Carton feed ////: top with active conveyor belt Hfedpsr E Dpaefx Ai Djg Operator display ////: Touchscreen Drives & control ////: 8 servo motors and PLC control Box length ////: 150-300 mm Box width ////: 120-260 mm Packaging height ////: 50-100 mm Speed ////: 40-60 boxes/min. depending on box size and product weight Recommended cardboard box ////: pre-folded boxes, 250-350g/m³ Consumption ////: approx. 9.5KW Power supply ////: 380 V / 50 Hz/ 3-phase System weight ////: approx. 1000 kg System dimensions ////: approx. 4257 x 1605 x 1823 mm System material ////: "304 stainless steel with surface treatment" Hot melt station ////: Required, optional Nordson or Robatech

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 650 mm High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Hfjdpfsy Rmz Ajx Ai Dog Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control unit: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 slots for up to 8 pallets Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 15,000 rpm, No reserve price – guaranteed sale to the highest bidder! Hsdpfoy Rmnvjx Ai Djfg Machine from the production of high-precision components for CNC rotary tables. No contract manufacturing. TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm High-speed spindle – max. speed: 15,000 rpm Spindle taper: HSK-A63 Through-spindle coolant possible Tool magazine capacity: 120 positions Circular accuracy: 5 µm MACHINE DETAILS Control: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Double pallet changer Note: The machine was decommissioned by a qualified electrician and professionally prepared for transport.

Condition: used, Year of construction: 2001, grinding length 600 mm grinding width 400 mm workpiece height 375 mm digital readout 2 Achsen HEIDENHAIN table-size 650 x 350 mm max. table load 400 kg magnetic clamping plate 600 x 350 mm dist. center of grinding spindle - table 525 mm table travel longitudinal 650 mm table travel cross 350 mm table feed 2 - 28 m/min grinding wheel size 300 x 30 x 76,2 mm dressing device Kopfabrichter voltage 400 V total power requirement 11,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,20 x 1,70 x 2,25 m band filter unit 1,00 x 0,75 x 0,80 m electric cabinet 0,90 x 0,40 x 2,25 m Hfsdpfxsy Ehw Ie Ai Deg - Serial-No.: 18090201 - Automatic vertical feed - Electric handwheel - HEIDENHAIN digital display, 2 axes - Head dresser - Coolant device - Belt filter system

Year of construction: 2009, condition: good (used), machine/vehicle number: 6863.209.036, The machine has previously been used for triangular shaped packages containing Swedish crisp bread. Hfedpfxoy Nmhts Ai Deg It can be powered on at inspection. The machine is stored in our warehouse in Lund.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details Hfsdpfoy Ew N Hjx Ai Djg grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CFS Powerpack 660 Thermoforming Packaging Machine with Labeling System – Year 2007 For sale: complete CFS Powerpack 660 thermoforming packaging line, manufactured in Germany, equipped with labeling system (TiroLabel) and vacuum system. Ideal for high-quality food packaging applications. Technical Details: Manufacturer: CFS Germany GmbH Model: Powerpack 660 Year: 2007 Machine No.: 664/0561 Voltage: 400 V Frequency: 50 Hz Power: 29 kW Current: 45 A Phase: 3AC + N + PE Included Equipment: Integrated TiroLabel labeling system Vacuum pump (Busch) Pneumatic system with cylinders and control units Tooling/moulds for trays (as shown) Complete documentation/manuals Description: Fully automatic thermoforming machine designed for forming, filling, vacuum/MAP packaging and sealing. The machine is built in stainless steel and suitable for hygienic food production environments. Equipped with labeling unit, allowing direct application of labels on packs, which increases productivity and reduces manual work. Applications: Cheese (blocks, slices, portions) Meat and processed meat products Ready meals Other food products Features: Hfjdpfjy Hdkyjx Ai Dsg Thermoforming, sealing and cutting in one process Vacuum/MAP capable Integrated labeling system Reliable German build quality Continuous industrial operation Condition: Used, well maintained In working condition Available for inspection Location: Serbia

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, CFS Powerpack 660 Thermoforming Packaging Machine – Year 2006 For sale: high-quality CFS Powerpack 660 thermoforming packaging machine, manufactured in Germany. This machine is designed for reliable and efficient packaging of food products, ideal for dairy (cheese), meat, and similar applications. Technical Details: Manufacturer: CFS Germany GmbH Model: Powerpack 660 Year: 2006 Machine No.: 661/0389 Voltage: 400 V Frequency: 50 Hz Power: 32 kW Current: 48 A Phase: 3AC + N + PE Film width: 460 mm Description: The machine is in good working condition and has been regularly maintained. It offers stable performance and consistent sealing quality. Suitable for vacuum and/or MAP packaging (depending on configuration). Robust stainless-steel construction ensures durability and hygiene compliance for food production environments. Applications: Hsdpfxey Hdkgo Ai Dofg Cheese (blocks, slices, portions) Meat products Ready meals Other food products Features: Automatic thermoforming and sealing process User-friendly control panel Continuous operation capability Compact and solid industrial design Condition: Used, well maintained Available for inspection Location: Serbia Loading: Can be arranged Shipping: Assistance possible on request

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, CFS Compact M380 thermoforming machine - year 2004 Industrial thermoform (traysealer/packaging) machine of renowned manufacturer CFS (Italy), model Compact M380, for sale. The machine is intended for packaging products in plastic containers with vacuum and/or gas (MAP), suitable for the food industry. Basic features: Model: CFS Compact M380 Hodjy Hdi Ajpfx Ai Djfg Year of manufacture: 2004 Power supply: 400 V, three-phase (3AC + N + PE), 50 Hz Power: 26 kW Current: 38 A Compressed air consumption: approx. 7,600 Nl/min Water consumption: approx. 2.75 l/h Weight: about 3100 kg Description: The machine is complete and ready to work. Robust construction, made of stainless steel, easy to maintain and clean. Equipped with a control panel for managing the packaging process. Suitable for different types of products (meat, cheese, ready meals, etc.). 2 labelers For more information and price, please contact.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: M8286, This listing offers a FECKEN KIRFEL K11 bandknife horizontal splitting machine, manufactured in 1988 in Germany. The machine is engineered for industrial applications and is especially well-suited for splitting rubber and similar materials. It boasts a robust design with dimensions of 1950 mm (length), 4450 mm (width), and 1800 mm (height), and an approximate weight of 3450 kg. The K11 model provides a working width of 1400 mm (56''), making it suitable for processing a wide range of material sizes. It features a maximum power consumption of 17.5 kW, operates at 380 V, with a control voltage of 220 V. The rated current is 22 A, and the unit is safeguarded with a 35 A fuse. Operation is managed via a control panel located on the right side, featuring multiple buttons and toggle switches for precise machine control. A metal table in front of the machine facilitates efficient handling of materials during the splitting process. The equipment is finished in green and is currently positioned in an industrial setting with rubber sheets nearby, clearly indicating its use in rubber processing operations. Hjdpfxoyqtc Ss Ai Dofg