Used Kersting Gf 2880-510-400 for sale (19,401)

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches Ppsdpfx Aneb A Iwcotet -Cutting jaws: 2" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 55 kg

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches Ppsdjb A Rzwspfx Antet -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm -Weight: 60 kg

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R glue spreader - 1300 mm - NEW MACHINE - Loader from glue spreader onto conveyor - Infeed conveyor, length 6000 mm x width 950 mm, motorized - ORMA hydraulic flat press 5100x1400 mm – 12 cylinders, hot water heating plates, refurbished - Outfeed conveyor, length 6000 mm x width 950 mm, motorized This press requires medium to high pressure to ensure the panels are 100% flat. Panel size: 5100 x 1400 mm (solid drilled steel plates) Pedpfxovva Sys Antopt Daylight opening: 180 mm Full surface pressure: up to 10 kg/cm² Number of hydraulic cylinders: 12 units – cylinder diameter 140 mm MYLAR Teflon film on the plates Preparation for hot water plate heating – boiler not included Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine is fully refurbished, calibrated, and tested. Price: €55,000 excl. VAT, without OSAMA glue spreader Price: €62,000 excl. VAT, including OSAMA glue spreader

Condition: ready for operation (used), Schunk GFS 25-180 universal swivel finger 355510 + INA HK2516-2RS needle bearing, used, good condition, 100% functional, delivery as per photos. Ppodex Eucqjpfx Antet

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Psdpfx Aeyit Ulentjpt

Condition: ready for operation (used), Siemens 1HC5106-0EJ16-1RU7-Z Motor SN: E0T86884001004 with Hübner Long Life Tacho TDP 0.09LT-3 - Z = A11 / G30 / K18 (radial shaft seal, oil-tight (oil-tight flange) - IP65), used, in good condition, 100% functional, delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Ppedpfx Anox Dvd Rjtot

Condition: good (used), Faceplate Diameter 400 mm KKG 6 Ppjdpfxsc U E Rts Antot Height 100 mm Bayonet lock

Year of construction: 2023, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Westtech Woodcracker T4000 Telescopic stage / incl. CS510 crane / in stock & immediately available / Year of manufacture: 2023 Price: €43,990.00 net / €52,348.10 gross Westtech T4000 Telescopic Stage - Working range up to (mm): 6,350 - Telescopic extension (mm): 4,000 - Own weight (kg): 680 – 730 - Lifting moment from excavator kinematics (kNm): 92 - Permitted load capacity (retracted / extended in kg): 2,500 / 1,550 - Maximum push force (kg): 100 - Recommended hydraulic flow for telescopic extension (l/min): 50 – 110 - Recommended hydraulic flow auxiliary circuit (l/min): 30 – 40 - Recommended operating pressure for telescopic extension (bar): 250 - Carrier vehicle operating weight (t): 14 – 22 Westtech CS510 crane - Cutting diameter (mm): 540 - Grapple opening (mm): 1,270 - Own weight (basic equipment - full equipment in kg): 370 – 500 - Recommended hydraulic flow (l/min): 50 - 90 - Recommended operating pressure (bar): 200 – 280 Equipment: - Incl. Auto tilt function for crane - Incl. Rotator RTC 10-2 - Incl. Pendulum joint with brake - Incl. Transport box for CS510 crane Optional: Lehnhoff MS21 adapter plate incl. bolts and installation = €2,400.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide range of various Westtech products available in our warehouse! Mr. Herden (phone) is happy to assist you. Pedpfx Ajyix Nuentept Upon request, we are happy to offer you finance options as well. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sale excepted! Internal No: 523028 / 523088 = More information = New: No Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: refurbished (used), Year of construction: 2017, operating hours: 3,751 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, feed length Y-axis: 3,300 mm, GF CUT200SP, year 2017. Machine available at our Semsales premises in April. The machine will be fully cleaned and serviced. 0.1 mm option. Wire chopper. Pjdpsyk Upasfx Antspt

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Pjdpfjrvg N Djx Antopt Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Also available sprocket 48B3 17 Z and 48B3 35 Z

Year of construction: 2016, condition: new, 1 piece reconditioned unused industrial bevel helical gearbox from ASUG. TGL 21815 All parts of the gearbox are renewed, except the housing !!! Claw coupling: 800 mm (only one half available) Maximum torque: 27.829 Nm Gear ratio: i= 1:80 max. power: 51 kW oil filling: 170 kg Speed: n1= 1400 Speed: n2= 17,5 Ppsdpfx Ajgwlrdentot weight: 1450 Kg Shaft diameter d1: 65mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925mm Length from base: 1170 mm !! Gearbox has no oil cooler !

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Working width with suction bar: 86 cm Max. area performance: 2000 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: Podpju Sr U Nofx Antopt - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new - Disc brushes new - Support wheels new - Squeegee blades new - Fresh water filter new Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, input voltage: 24 V, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Psdpfx Anoyanpfstjpt Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Ppedpfx Aox I Akusntjt Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: like new (used), Tool spindle Planer shaft Milling spindle Ppodpeqxtglofx Antjt spare parts for GF planer

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Ppedpeyazkcjfx Antet

Condition: like new (used), Year of construction: 2023, Tindo Cooking Kettle 400L Year 2023 Capacity 400 Ltr Fully stainless steel Tipping facility Terminal fluid jacketed vessel Ppsdpfxst Tx Dls Antjt Variable speed mixing control Vertical lift on head As new condition Only used for product testing

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 1,200 mm, rotational speed (max.): 3,000 rpm, machine/vehicle number: 05133, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item on time between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Pjdey D Nhlspfx Antjpt Speed: 3,000 rpm MACHINE DETAILS Rated voltage: 200 V Frequency: 50 Hz Rated current: 3.77 A Power: 753 VA Vibration frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 600 x 500 x 1,200 mm Weight: 80 kg External reference: 61

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 18275, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production of highly precise components for CNC rotary tables. Not a job shop machine. TECHNICAL DETAILS Travel in X-axis: 650 mm Ppjdpfx Anoy Rmz Aotjt Travel in Y-axis: 650 mm Travel in Z-axis: 650 mm C-axis: 360°/continuous High-speed spindle speed max.: 10,000 rpm Spindle taper: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer + storage tower with 6 positions for up to 8 pallets Note: The machine has been shut down by a qualified electrician and professionally prepared for transport.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine from the production line for highly precise components for CNC rotary tables. Not a custom-made machine. TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 650 mm C-axis: 360° / continuous High-speed spindle speed max.: 15,000 rpm Spindle connection: HSK-A63 Internal tool cooling possible Number of tool magazine positions: 120 Circular accuracy: 5 µm MACHINE DETAILS Control system: Siemens Sinumerik 840D Ppsdpfsy Rmnvex Antot Number of axes: 4 EQUIPMENT Documentation Chip conveyor Coolant tank Dual pallet changer Note: The machine was shut down by a qualified electrician and professionally prepared for transport.

Condition: used, Year of construction: 2004, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, cutting length (max.): 2,200 mm, table length: 2,500 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! Ppedpfx Ajy Ur Dqontet The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Maximum plate width: 4,300 mm Maximum plate length: 2,200 mm Maximum saw blade overhang: 125 mm Number of grippers: 10 Number of work tables: 4 MACHINE DETAILS Programming software: CADMATIC 4 Control system: WINDOWS XP EQUIPMENT Swiveling unit Lift table Roller feed table Lift table (manufacturer: LAWECO, dimensions: 1,000 x 2,500 mm) Barcode label printer (model: ZEBRA ZT231) Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8524

Condition: excellent (used), table width: 700 mm, table length: 1,000 mm, LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Ppedpfx Ajy Szwnentjt Table 700x1000 mm

Year of construction: 2016, operating hours: 6,100 h, condition: ready for operation (used), functionality: fully functional, Terex Pegson Premiertrak 400 2016 year 6100 hours Inlet 1100x700 mmTerex Pegson Metrotrak 900x600 2016 year 6100 hours Inlet 1100x700 mm Engine Scania DC09 Pedpfoxvcduex Antjpt CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Weight 45 tons Fitted with side conveyor Fitted with overband magnet Fitted with belt scale Machine in great working condition, ready for work like NEW

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW Pedpfszadb Rex Antopt - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed Psdpfxezac U Aj Antspt *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)