Used Klett Mf 2350 74 for sale (2,614)

Year of construction: 2025, condition: new, functionality: fully functional, Available in different sizes and capacities. Domino is a professional floor stove designed to meet the needs of simple and versatile use. It is ideal for baking bread, desserts and pizzas in the tray. The Domino series is especially suitable for bakeries, pastry shops, pizzerias and hotels. Basic characteristics: Baking temperature up to 350°C Height of the working floor: 18 cm (optional: 25 cm) 3 power levels available: STANDARD, MAXIMUM and TRAY PIZZA (on some models at an additional cost) New design suitable for blending into the interior Number of stackable floors: from 1 to 4 Fydrofire® Fireclay Plates Fydrofire® floor slabs provide greater reliability and even heat distribution Standard on all models. Control Panel & Software TOUCH electronic control "READY TO BAKE" function – the stove is ready for the set temperature with lower energy consumption "RECOVERY TIME" function – you always know how much time is left until the furnace is ready Access password management – guarantees consistency in baking by restricting access to recipes USB 2.0 port for fast and secure data transfer Energy Efficiency POWER MANAGEMENT: energy-saving mode for floors and steam generators, with 3 different modes according to the type of baking OPT display – shows the efficiency of the furnace use, enables conscious use and savings SLEEP function – to save during periods of inactivity Temperature control using two probes per floor Minimum insulation thickness: 100 mm Glass that reflects heat Steam generator (optional) with optimized performance and tuning from the panel Steam generator on/off button Automatic switching on and off by days and weeks Automatic shutdown in case of prolonged inactivity Display of time for conscious use of the stove Ready to connect to a power limiter device Construction Stainless steel front and hood Side panels made of prepainted sheet metal From the Squirrels, Squirrels, Squirrels Independent heater at each end of the floor Concrete and fireclay baking plate Gjdpfewhdpxsx Albouc Lightweight aluminum frame for easy transport and installation Automatic control of the steam ejection damper Doors with upward opening – saves space Double Spring Doors Easy and quick cleaning of the glass without removing it Large stainless steel handle, insulated plastic handles for safe and ergonomic handling The internal dimensions of the floor correspond to the actual width of the opening Double lights per floor, with on/off switch Control panel on the right. Technical characteristics: Floor: 3 Floor entrance height: 18 cm Number of trays 60x40: 6 pieces per floor Floor dimensions width x depth: 124 x 122 cm Oven dimensions WxDxH: 163 x 161 x 241 cm Power: 13.6 kW per floor Weight: 185 kg one floor

Condition: used, Year of construction: 1973, KRUPP FS-74 Cutting Machine - incl. dual brake unit (250kg) - incl. drive system - speed control - winding monitor The system is available twice. (price per unit) Please note that the machine must be dismantled, packed, and collected by the buyer. Gujdpeytcw Rjfx Albsc

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² Guedpewn Egrefx Albsc - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, load capacity per storage section: 3,400 kg, TECHNICAL DETAILS Storage locations: 25 pcs Storage height: 6,000 mm Sheet format: 2,500x1,250 mm Max. load per level: 3,400 kg Gsdpsxhfkhefx Albjuc Maximum field load: 30,000 kg EQUIPMENT Changeover tower with 6 drawers and extension with 19 compartments

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Guedpfeytgn Tox Albec

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) Gsdoyvmq Iepfx Albsuc 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: used, Gear motor, electric motor -Speed: 74 rpm -Power: 0.37 kW -Construction: B4 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 360/160/H250 mm -Weight: 11.6 kg Gjdpfecwl Aysx Albeuc

Condition: used, Gear motor, electric motor -Speed: 37/74 rpm -Power: 0.2/0.4 kW -Construction: B5 Guedpfx Aoc U Rhgslbsc -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 345/200/H185 mm -Weight: 14 kg

Condition: used, Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg Gedpod D Iq Dofx Albjuc

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 78 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Brake -Dimensions: 540/220/H230 mm Guodpechk Inofx Albsc -Weight: 22 kg

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette Gjdpedl Sl Usfx Albouc -Max. Passage: Ø 74 mm -Edition: gunmetal -Tip height: 185 mm -Drawings: with the photos -Price: per piece -Number: 1x available -Dimensions: 370/75/H385 mm -Weight: 11.1 kg

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: MF 04 520-HN -Price: per piece Gedsb A Hzropfx Albeuc -Quantity: 4 available -Weight: 0.2 kg/piece

Year of construction: 1992, condition: used, Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: "Fumatech" MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm Godpsqwprgefx Albsuc -Weight: 84 kg

Condition: good (used), gear motor, electric motor, electric gear motor Godpfx Alsvv Sikjbeuc -Manufacturer: SSB, gear motor with brake -Type: DSFG-12/30-0511 .208.60-N-B3 -Gearbox: Type 12 -Speed: 74/8 rpm -Power: 1.1 kW -Design: B3 -Shaft: Ø 30 x 60 mm -Protection class: IP 44 -Brake: 96 V 0.48 A -Dimensions: 680/250/H245 mm -Weight: 43 kg

Condition: good (used), Geared motor, electric motor, electric geared motor Godov Iaw Hjpfx Albsuc -Manufacturer: SEW-Eurodrive, geared motor -Type: R32DT63N4 i = 17.73 :1 -Speed: 74 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Dimensions: 307/160/H145 mm -Weight: 9.7 kg

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 Gusdpfx Asrb E Ewolbec -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm Gjdpfxoqn A Rnj Albouc control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm Gujdpfjx U A Ugex Albsc magnetic clamping plate 600x200 mm wheel diameter 220-300 mm machine weight ab. 2200 kg

Condition: used, Year of construction: 1954, grinding length 600 mm grinding width 205 mm x-travel 600 mm ja Godpfjvu Hkyex Albjuc

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 Gjdpfeqn A Rgjx Albouc frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Condition: used, Year of construction: 2000, grinding length 600 mm grinding width 300 mm Gjdpjw Hg Uzsfx Albsuc magnetic clamping plate 600x250 mm wheel diameter 220-300 mm weight 2200 kg

Condition: new, MF-Inverter 1000Hz for resistance weldingmachines Gjdpfoyrx Nyex Albeuc HWI 2806-2816 IQ Profil + HWS 2102 IQ Profil available from stock

Condition: good (used), grinding stone, grinding pin Gusdpfsb A Nc Rox Alboc -Recording: M12 -Outer diameter: 50 mm -Length: 65 mm -Quantity: 74 pieces -Sale: only complete set -Weight: 28 kg

Condition: good (used), geared motor, electric motor -Speed: 70 rpm -Power: 0.37 kW Gsdpfxob A R D Tj Albsuc -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Number: 4x motors available Price: per piece -Dimensions: 460/204/H210 mm -Weight: 18 kg

Condition: excellent (used), functionality: fully functional, drilling depth: 2,000 mm, feed length X-axis: 3,250 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 500 mm, total length: 8,000 mm, total width: 6,000 mm, total height: 4,300 mm, overall weight: 45,000 kg, feed rate X-axis: 8 m/min, feed rate Y-axis: 8 m/min, feed rate Z-axis: 8 m/min, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, spindle motor power: 17,000 W, table length: 2,000 mm, table width: 2,500 mm, table load: 50,000 kg, feed length W-axis: 500 mm, Heidenhain 530 CNC Control Drilling depth (V): 2,000 mm Longitudinal travel (X): 3,250 mm Vertical travel (Y): 1,500 mm Transverse travel (Z) threading axis: 500 mm Workpiece approach (W): 500 mm Rapid traverse speed X, Y, V: 8,000 mm/min "IMSAUTOROTATION" rotary-translating table: 2,000 x 2,500 mm Maximum table load (rotating workpiece – clamped on axis): 30,000 kg Maximum load (stationary workpiece): 50,000 kg Drilling head tilt (C): +/-20° ISO 50 spindle taper Spindle motor power (drilling and milling): 17 kW Spindle speed: 4,200 rpm Solid drilling diameter (min) drill Ø: 6 mm Solid drilling diameter (max) drill Ø: 40 mm Tool magazine: 20 stations Floor space required (approx.): 6,000 x 8,000 mm Height: 4,300 mm Total machine weight (approx.): 45,000 kg Complete with: - Optical scales (X, Y) - Drilled plate 2,200 x 2,500 mm, thickness 70 mm - Gun drills with bushings Gsdpewzw Ihofx Albsuc - High pressure 80 bar - Full oil-tight enclosure - Chip conveyor USED MACHINE