Roller PAINTING and FINISHING LINE (UV)

CEFLA + COSTA LEVIGATRICI mm 1300 (MF EVO + UV-R + SMART COATER)

Condition: good (used), functionality: fully functional, Glass jar filling and closing line. 12 filling heads and 4 closing heads. Kodpstqmvrefx Aadedw

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Kdodpfx Aaol R Hy Asdow Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: reconditioned (used), Year of construction: 2002, Longitudinal profiling machine for parquet Ksdpfevxz Syjx Aadedw 4+4 motors Minimum working width 80 mm M+F profile

Condition: used, Number of spindles 6 St. Working width 240 mm Working height 200 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Dimensions (L/W/H) 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31 also for window production ----- Machine is cleaned and functionally checked ! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1. Spindle ----- First lower spindle horizontal Motor with brake 11 KW Diameter: 40 mm Speed: 6,000 rpm 2. Tool holder HSK ----- First right tool holder vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3. Tool holder HSK ----- First left tool holder, vertical Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake 11 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic adjustment of the tool diameter (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake 7.5 KW Speed: 8,300 rpm Vertical and horizontal electronic Positioning Other technical features: ----- 2 feed units after the upper spindles for shortening the axis distance from 620 mm to 450 mm Air cushion lubrication in the work table Flange feed rollers before and after the left vertical spindle with electronic (CNC) telescopic adjustment Ksdovnv Uzjpfx Aadedw 2 x milling unit with belt drive with quick-change system HSK 85 in position 2 – 3 Working height 200 mm instead of 120 mm 5 x electronic horizontal positioning position (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning position (2 – 3 – 5 – 6) 3 x electronic setting of the tool diameter (setup) position (3 – 4 –5) Mobile control 10 PRL equipment for removing the glass strip on the 2nd upper horizontal spindle Machine without processing tools (technical data according to the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Manufacturer: BOSCH Tip: SVZ 2500 A Maximum bag length: 400 mm Ksdpfx Aajrrv T Isdedw Minimum bag length: 100 mm Maximum bag width: 250 mm Minimum bag width: 90 mm Maximum output: 80 bags/min

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW Kedjqprk Tepfx Aadedw - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger Kjdpfx Aaevy Tyxsdjdw - FMI A304 beader - FMC 652 seamer

Condition: used, Year of construction: 2023, Spraying machine KaMa, KR BM 1000 B, The spraying machine is a demonstration model from a trade fair. It was only used for test and demonstration purposes. With 1 piece HD pump Bings Marple 8/25 up to 175bar and 4 pieces airless spray guns Krautzberger KAA1300. Machine equipped with change-over valve for quick color change, lever switchable to max. 3 color circles and 1 rinsing agent pump (options). In Ex-version. Kodpfx Aajumvnhjdsdw Machine is ready for demonstration at the warehouse in Blomberg. - Producer Ka-Ma - Type KR BM 1000 B - Year of construction 2023 - Working width 1.200 mm - Single gun drive system - Dry filter system - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system SPS, LS - Number of installed lacquer circles 3 Stk. - Number of installed spraying guns 4 Stk. - quick change system for spraying guns - spray gun type Krautzberger KAA1300, Airless - Airless spraying system - Height adjustment for spraying guns 150 mm - Producer lacquer pump Binks Maple 8/25 bis max. 175bar - Supply air box - Suitably for water based lacquer - Length 3243 mm - Width 3482 mm - Height 2450 mm - Voltage / HZ 400 / 50 - Colour 7035, lichtgrau - Weight 3.100 kg _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Kedpfxjpyg Itj Aadjdw

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4.1 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, Ksdjidqwpspfx Aadsdw with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller