Used Kubota 407 for sale (719)

Condition: used, Year of construction: 2007, operating hours: 100 h, Equipment: all wheel drive, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: Skyjack TM scissor lift Type SJ6832RT Diesel 4x4 Manufactured 09/2007 Maximum working height 11.70 m Maximum platform height 9.70 m New Kubota engine installed in 2021 for €7,000.00 (net), with a maximum of 100 operating hours since, and kept as a backup unit. Platform dimensions 1.42 m x 2.49 m Platform extension 1.50 m Permissible gross vehicle weight 3,475 kg Payload 454 kg 2 persons Overall length 2.72 m x width 1.73 m x minimum height (terrain-folding) 2.51 m Diesel drive, 4x4 Gradeability 40% Travel speed 0.6 - 6.1 km/h Lifting time with rated load 39 sec Driving at full height with extended platform Diesel engine mounted on extendable support Platform extension 1.50 m Spring-loaded, self-closing full door Foam-filled tires Tilt sensor with alarm and automatic emergency shutdown Hour meter Overload sensors Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties, up to a dispute value of €10,000, is the local court of Ludwigslust; for dispute values exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale. Ijdpfx Akszuuyxj Aoif

Condition: used, mileage: 2,63,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Iodsxal A Uepfx Ak Asif Errors and omissions excepted, subject to prior sale!

Condition: used, Year of construction: 2018, TEDERIC D450/3200 injection molding machine with SW7315DS robot Manufacturer: TEDERIC Model: D450/3200 Iisdpjzii Efjfx Ak Aof Year of manufacture: 2020 Serial number: T3045-0141 Robot: SW7315DS Robot year of manufacture: 2018 Technical data Clamping force: 4,500 kN Screw diameter: 75 mm Centering diameter: injection side: 200 mm moving side: 100 mm Column spacing: 780 × 780 mm Minimum mold height: 300 mm Maximum mold height: 780 mm Maximum platen spacing: 1,580 mm Maximum opening stroke: 800 mm Injection volume: 1,741 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 56 kW Heater power: 39.1 kW Screw diameter: 75 mm Ejector stroke: 200 mm Screw: bimetallic Machine condition Total operating hours: 42,864 h Automatic operating hours: 16,386 h SW7315DS robot (2018) included.

Condition: good (used), Year of construction: 2007, operating hours: 2,985 h, lifting height: 10,000 mm, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Make of engine: Kubota Weights Empty weight: 4.080 kg Functional Lifting capacity: 450 kg Working height: 1.200 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H): 3,18m / 1,78 m / 2,56 m Surface type: Rough terrain Isdpfxozkppyo Ak Aoif Additional information Please contact Tobias Mayr for more information

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW Iodpfx Akjzinano Asif • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: excellent (used), Year of construction: 2015, TEDERIC D250/1100 injection molding machine with SW6310S robot Manufacturer: TEDERIC Model: D250/1100 Year of manufacture: 2015 Serial number: D1025/0747 Robot: SW6310S Robot year of manufacture: 2019 Technical specifications Clamping force: 2,500 kN Screw diameter: 55 mm Iijdpfx Akoziiyvj Aef Centering diameter: injection side: 160 mm moving side: 100 mm Column spacing: 580 × 580 mm Minimum mold height: 250 mm Maximum mold height: 600 mm Maximum platen spacing: 1,150 mm Maximum opening stroke: 550 mm Injection volume: 601 cm³ Hydraulic ejector: YES Number of hydraulic cores: 2 Cores: on the nozzle side – YES on the closing side – YES programmable – YES Motor power: 31 kW Heater power: 19.7 kW Screw diameter: 55 mm Ejector stroke: 160 mm Screw: bimetallic Machine condition Total operating hours: 79,526 h Automatic operating hours: 40,612 h TEDERIC SW6310S robot (2019) included.

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec Iodpfx Akey Tp Hgo Ajif - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: excellent (used), Year of construction: 2014, BATTENFELD TM XPRESS 350/2250 INJECTION MOLDING MACHINE Control system: B6P Year of manufacture: 2014 Operating hours: 49,462 h Clamping unit Clamping force: 3500 kN Platen dimensions: 1030 × 1140 mm Tie bar spacing: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum mold opening: 1380 mm Core centering ring diameter: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection weight (PS): 1078 g Injection pressure: 2070 bar Maximum injection speed: 600 mm/s Iiedpeziukgjfx Ak Asf Additional equipment 4 × pneumatic valve 2 × hydraulic core Kneeling system after professional refurbishment Dimensions and weight Machine length: approx. 7,100 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Machine weight: approx. 17,000 kg The machine is available for inspection and testing after prior arrangement of a date.

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/650 pico injection molding machine ENGEL robot Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Technical data Clamping unit Clamping force: 6500 kN (650 tons) Distance between columns (H × V): 1100 × 960 mm Platen dimensions (H × V): 1510 × 1440 mm Mold height (min./max.): 650 / 1150 mm Mold opening stroke: 1400 mm Maximum distance between platens: 2050 mm Maximum mold weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit Screw diameter: 90 mm Maximum injection volume: 2740 cm³ Maximum injection weight (PS): 2520 g Iiodpfoywrtwjx Ak Aof Maximum injection pressure: 2180 bar Standard injection pressure: 1910 bar Screw L/D ratio: 20:1 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plastication rate: 77 g/s Nozzle clamping force: 150 kN Drive and power supply Drive power: 90 kW Cylinder heater power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1000 l Hydraulic equipment 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the stationary platen 4 cascade valves on the stationary platen ENGEL robot ENGEL linear robot Integrated with the machine control system Designed for automatic part removal Robot control from the CC200 system Synchronization of robot operation with the injection molding machine cycle

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,359 h, power: 34.1 kW (46.36 HP), load capacity: 240 kg, mast type: telescopic, lifting height: 27,750 mm, lifting power: 240 kg/m, platform length: 2,300 mm, platform width: 900 mm, overall weight: 16,550 kg, transport length: 11,360 mm, transport width: 2,480 mm, transport height: 2,750 mm, fuel type: diesel, fuel consumption per hour: 10 l/h, fuel tank capacity: 72 l, tire size: 20" foam-filled terreinbanden, tire condition: 85 %, wheelbase: 2,800 mm, ground clearance: 410 mm, color: blue, Equipment: UVV, all wheel drive, differential lock, === KEY SPECIFICATIONS === Year: 2019 Hours: 2,359 h Working height: 27.75 m Max horizontal outreach: 21.45 m Platform capacity: 240 kg (Inside: 350 kg) Platform dimensions (L × W): 2,300 × 900 mm Turret rotation: 360° continuous Platform rotation: 90° / 90° Boom type: Telescopic boom lift Jib: Yes (pendulum arm: +56.8° / –62°) Drive: Diesel Four-wheel drive: Yes Tyres: Foam-filled off-road Stabilisers: No Engine manufacturer: Kubota V2403-M Emission class: Stage 3A Weight: 16,550 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and complete documentation included Ready for immediate transport and operation Comprehensive technical documentation available Iiedpfx Ajxxa E Iok Aef === CONDITION === Excellent working condition — fully inspected, serviced, and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price: €65,000 (EXW / excluding VAT) Reliable first-owner machine with full service history and expert technical support. All machines are thoroughly inspected, CE-certified, and immediately operational. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request. Flexible worldwide shipping options tailored to your destination. All logistics professionally handled by the Collé Rental & Sales logistics team.

Condition: used, Year of construction: 1996, - Brand : Omme - Type: 2500 EBDZ - Year built: 1996 - Weight: 2880 kg. - Hours: 587 hours Iiodpfoyy Dmbex Ak Aof - Drive: Kubota diesel + Battery + 220 volt - Working height: 25 meters - Lateral reach: 12.7 meters - Wheel Drive / Movers - Extra nose wheel - Stamp plates 4x - Drive plates 4 x - Dutch license plate - second owner - Safety inspection possible - Aerial work platform book available - Maintenance history dealer present - CE document available - Trade-in and transport possible - Video on our website * Brand: around *Type: 2500 EBDZ * Construction year: 1996 * Weight: 2880 kg. * Lateral reach: 12.7 meters * Working height: 25 meters * Hours: 587 uur

Condition: used, Year of construction: 2016, operating hours: 1,832 h, Equipment: all wheel drive, Skyjack SJ8841RT 4x4 scissor lift, manufactured in 2016, with 1,832 operating hours. ---- * Manufacturer: Skyjack * Type: SJ8841RT * Year of manufacture: 2016 Isdpfx Akeztzvqs Aoif * Operating hours: approx. 1,832 * Drive: 4x4 * Diesel Kubota engine * Working height: approx. 14.3 meters * Platform height: approx. 12.3 meters * Operating weight: approx. 6,232 kg * Photos and video available upon request (WhatsApp Erik) * Price: €9,900, net + 19% VAT. ---- For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice, errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Iijdpfx Aozkanysk Aef Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX Injection Molding Machine Year of manufacture: 2010 Control system: MC5 Type: Hydraulic injection molding machine Isdpfxozkafls Ak Ajif Equipment Fully hydraulic clamping unit MC5 control system with a color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials 70 mm screw with abrasion protection Check valve Open nozzle Clamping Unit Clamping force: 3000 kN Platen dimensions: 995 × 1050 mm Tie bar spacing: 630 × 630 mm Opening stroke: 820 mm Maximum opening: 1150 mm Minimum mold height: 330 mm Ejector stroke: 200 mm Ejector force: 57.7 / 28.3 kN Injection Unit Screw diameter: 70 mm Injection pressure: 1877 bar Injection volume: 1078 cm³ Injection weight (PS): 981 g Injection rate: 385 cm³/s Injection rate with accumulator: 1155 cm³/s Screw speed: 220 / 310 rpm Plasticizing Unit For thermoplastic materials Abrasion protection Check valve Open nozzle Electro-hydraulic System Pump motor power: 55 kW Heater power: 29.2 kW Number of heating zones: 6 Number of dry cycles: 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Dimensions: 6500 × 2200 × 2300 mm Weight: 14.5 t

Condition: used, Year of construction: 2016, operating hours: 1,906 h, Equipment: all wheel drive, Skyjack SJ9250RT 4x4 diesel scissor lift, manufactured in 2016, with a working height of 17.2 meters! ----* Manufacturer: Skyjack * Type: SJ 9250 RT 4x4 * Year of manufacture: 2016 * Operating hours: approx. 1,906 * Working height: approx. 17.2 meters * Transport length: approx. 4.47 m * Transport width: approx. 2.34 m * Transport height: approx. 2.29 m * Hydraulically extendable work platform * Kubota diesel engine * Drive: 4x4 * More photos and video available upon request (WhatsApp Erik) * Automatic outrigger leveling system needs to be inspected/repaired * Price: 9,500 Euros, net + 19% VAT Ijdpfxsztzu To Ak Ajif ----For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice; errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2011, Machine: ENGEL DUO 5550/650 pico Control unit: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Clearance between tie bars (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Maximum platen distance: 2,050 mm Maximum mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (Aggregate 5550) Screw diameter: 90 mm (reinforced for up to 30% fiber content) Maximum injection volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Ijdpfx Asyw Aa Ujk Aeif Screw L/D ratio: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticising rate: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Barrel heaters power: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l 4. Special Equipment and Hydraulics Core pull circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 units (installed on the fixed platen) 5. General Description Two-platen machine (DUO series) designed for large-scale plastic part production. The design ensures: - High rigidity of the clamping system - Capability for operation with heavy moulds and large opening strokes Additional information: - Screw reinforced for operation with up to 30% fiber content - All hydraulic hoses replaced in Q4 2024 - Machine condition: excellent, ready for production Availability: Immediately available, professionally maintained, and ready for instant operation.

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection. Iijdpfx Akey R I Uqj Asf

Condition: used, Year of construction: 2004, operating hours: 4,505 h, lifting height: 3,540 mm, fuel type: diesel, mast type: duplex, fork length: 1,140 mm, fork width: 1,160 mm, total height: 2,800 mm, total length: 2,300 mm, total width: 2,460 mm, color: grey, Empty weight: 3.020 kg Lifting capacity: 3.000 kg - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Isdpjywu A Uofx Ak Ajif - Serial number: D510447 - Operating hours: 4505 - Lifting capacity: 3000kg - Lifting height: 3540mm - Overhead clearance: 2800mm - Free lift: 0mm - Fork length: 1140mm - Maximum fork width: 1160mm - Minimum fork width: 210mm - Number of wheels: 3 Wheels - Attachment: Side-shift - Options: Half cabin, Air tires, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Kubota - Transport dimensions: 2300mm x 2460mm x 2800mm (l x w x h) - Transport weight [kg]: 3020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Year of construction: 2013, condition: used, Field of application: Construction Make of engine: Kubota Isdpfxozui H Ho Ak Ajif Please contact Kristoff Van Havere for more information - Perfect working condition - Can be used with a cable or radiocontroller

Condition: used, Year of construction: 2007, operating hours: 6,090 h, load capacity: 230 kg, fuel type: diesel, Equipment: all wheel drive, Engine capacity: 1.498 cc Empty weight: 8.090 kg GVW: 8.320 kg Dimensions (LxBxH): 577 x 230 x 237 cm Engine type: Kubota Perkins Iiedpjydl Rzofx Ak Asf Mast: articulated arm Working height: 1.765 cm

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel type: diesel, color: red, overall weight: 2,300 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, cabin, standard shovel, 3 YEAR WARRANTY !!! The modern telehandler FARMER 809T - professional and durable. The FARMER 809T model is the ideal device for the most demanding construction, electrical, plumbing and renovation companies and similar industries. We also offer post-warranty service. The LOADERS are manufactured under the supervision of European technicians. The device is built on a robust structure and can work in all conditions. The comfortable, glazed cabin enables safe and pleasant work. The lifting height of the machine is up to 3.5 m. TECHNICAL DATA: Model: 809T Bucket volume (CBM): 0.5 Rated load (kg): 1000 Maximum load with maximum arm extension (kg): 600 Total weight (kg): 2300 Maximum lifting height (mm): 3446 Maximum discharge height (mm): 2757 Engine: KUBOTA (4 cylinders) Rated power (kW/HP): 18.2/25 Rated revolutions [rpm]: 2400 Wheelbase (mm): 1101 Wheelbase (mm): 1595 Dimensions (mm): 4039x1446x2260 Standard tires: 31x15.5-15 Iijdpfx Akov Aw Eks Aef Maximum speed (km/h): 25 Rear view camera: YES SPECIAL FEATURES: - very high-quality and robust workmanship - Euro mount - lockable cabin, tank and bonnet - heating / ventilation - rear view camera - easy to handle - very maneuverable - compact and versatile - lighting system - hydraulic quick-change system - third hydraulic oil circuit for attachments - CE tested according to the latest standards and guidelines PRICE: €22,000 net €26,180 gross - INCLUDING shovel + fork - For a machine regularly serviced by us, we EXTEND the WARRANTY to TWO YEARS - FREE 12-MONTH WARRANTY - after this period, we offer all original parts if required! - FREE delivery within a radius of 200 km - Sale WITHOUT TAX possible (only with VAT number)- FINANCING possible - We are always at your disposal! KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you view and try out all the machines on site. We are the largest importer of construction and agricultural machinery in Europe and Kingway's headquarters in Germany. We have a huge selection of machines in stock, with around 70 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy and other neighboring countries and we also offer our customers access to all spare parts. Book an appointment and come for a test drive!

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 300-2000 CX injection molding machine Year of manufacture: 2010 We offer a high-class hydraulic injection molding machine from the renowned manufacturer Krauss Maffei. The machine is equipped with a modern MC5 control system with a color monitor, an integrated operator panel, and three USB ports. Thanks to its robust construction and high performance, it is perfectly suited for the production of thermoplastic parts. Equipment Fully hydraulic clamping system MC5 control system with color monitor Integrated control panel 3 USB ports Ijdpeza Uuzjfx Ak Aoif Complete plasticizing unit for thermoplastics Ø 70 mm screw made of wear-resistant material Backflow valve Open nozzle Technical data Clamping unit Parameter Value Clamping force 3000 kN Mold opening force 169.3 kN Plate movement force – opening 86.3 kN Plate movement force – closing 67.8 kN Dimensions of mounting plates (h × v) 995 × 1050 mm Clearance between columns (h × v) 630 × 630 mm Mold opening stroke 820 mm Minimum mold height 330 mm Maximum opening stroke of plates 1150 mm Ejector stroke 200 mm Ejector force 57.7 / 28.3 kN Injection unit Parameter Value Screw diameter 70 mm Maximum injection pressure 1877 bar Injection volume 1078 cm³ Injection weight (PS) 981 g Injection rate (standard) 385 cm³/s Injection rate (with accumulator) 1155 cm³/s Screw speed 220 / 310 rpm Electro-hydraulic system Parameter Value Pump motor power 55 kW Pump motor power with accumulator 55 kW Heater power 29.2 kW Number of heating zones 6 Number of dry cycles (Euromap 6) 1350 / h Oil tank capacity 720 l Dimensions and weight Parameter Value Net weight 14.5 t Dimensions (l × w × h) 6.5 × 2.2 × 2.3 m

Condition: ready for operation (used), functionality: fully functional, power: 24.4 kW (33.17 HP), gearing type: automatic, fuel type: diesel, color: original, empty load weight: 3,425 kg, chain condition: 60 %, Year of construction: 2012, operating hours: 5,946 h, Equipment: cabin, standard shovel, We are offering a Bobcat E35 tracked excavator for sale, available immediately. Registration number: 175/26 Technical specifications: Engine: Kubota 24.4 kW Operating hours: 5965 hours Year of manufacture: 2012 Weight: 3.424 t Equipment: Suspended driver's seat, mechanical clamp, crane hook, hydraulic connections on the boom, manual engine speed control, heater, cooling system, lighting, dozer blade Iiodpfx Aksy S S I Ds Ajf Accessories: 1 x ditching bucket (120 cm wide) 1 x digging bucket (30 cm wide, requires modification) Transport dimensions: Length: 4 m Width: 1.72 m Height: 2.4 m Loading and transport to the destination are possible upon agreement. The stated price is exclusive of VAT.

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT €470 plus VAT Iiodezdkc Uepfx Ak Aof 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Molding Machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Type: Hydraulic injection molding machine Category: Large-size injection molding machine Clamping force: 23,000 kN / 2300 tons Clamping Unit Clamping force: 23,000 kN Dimensions of mold mounting plates: 2900 x 2500 mm Distance between columns: 2000 x 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum opening width: 3800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm3 Injection weight (PS): 8071 g Injection pressure: 1600 bar Additional equipment according to available data Number of hydraulic cores: 2 Number of mold heating zones: 36 Number of hydraulic cascades: 10 Magnetic platens Mold tilting option Screw replaced in 2011 Iisdpfxezkatcj Ak Aof Screw reinforced for special materials Machine without robot Dimensions and weight Weight of the main unit: 113 t Weight of the control cabinet / additional components: 18 t Approximate total weight: 131 t