Used Leveling Bulldozer for sale (5,913)

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Knsdpfoz Agw Esx Afdjb Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Knodpfez Ag Rrjx Afdsb - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005–35120040, Sollich Turbotemper TE 1600 D tempering machine with nut mixture unit NM 200 VA and cooling unit, year of manufacture 2021, complete tempering and mixing unit from a production line for palm oil-free bread spreads. All components were designed, commissioned, and operated together; approximately 180 operating hours. Knedozzvf Aspfx Afdjb Item 1 – Sollich Turbotemper® TE 1600 D tempering machine (machine no. 35120005). Disc tempering machine in 3 stages, tempering capacity ≥1,350 kg/h (actual max. consumption approx. 1,200 kg/h). Stage 1: Heating stage, recrystallization to approx. 45 °C, separate hot water circuit with cooling function. Stage 2: Cooling/crystallization zone, constant crystal content, large cooling surfaces, high shear rate. Stage 3: Mixing zone for homogeneous crystal distribution, can also be used as a cooling stage. First-in/first-out principle, dedicated circulation pump for each stage. Siemens PLC + TP 900 (9") touch panel, program memory for 40 recipes. Reinforced drive with current measurement, HMI visualization, automatic power control. Two additional water circulation circuits for heating the mass and return lines. Thermal start-up protection, PT-100 sensor, safety pressure switch with digital pressure display. Connection: Cooling water 5–10 °C, 2–4 bar; 400 V, 3 phases, 50 Hz. Item 2 – Nut mixture unit NM 200 VA (machine no. 35120025). For a maximum of 1,200 kg/h of bread spread with 5–10% solids. Pull-out mixing screw for easy cleaning. 2 plate feeders TD 1 (machine no. 35120030/35120035), each with a level switch and a 150-liter hopper. Double-walled collection hopper with emptying pump SKP 1000 L-VA (machine no. 35120040). Unheated connecting pipe for complete emptying, can be dismantled via milk pipe fittings/quick couplings. Warm water circulation system, stainless steel control cabinet, operation via the HMI of the tempering machine. Mobile stainless steel frame with swivel castors, media connections pluggable. Item 3 – Mass pumps: Feed pump SPN 1500 (2", machine no. 35120010) and bypass pump SPN 1000 (2", machine no. 35120015), both frequency-controlled via the control system of the tempering machine. Item 4 – Cooling unit KKT chillers cBoxX40, air-cooled, year of manufacture 2021, designed to match this system. Cooling capacity 29 kW (10 °C/35 °C), refrigerant R410A, scroll compressor, flow rate 4.5 m³/h, free pump pressure 3.0 bar, tank volume 300 l (stainless steel 1.4301), 400/3/50 V, dimensions 2,030×830×1,240 mm, weight 540 kg, including level package and leveling feet. Complies with Eco-design Directive (EU) 2015/1095 + 2016/2281. The buyer receives a coordinated, immediately re-installable unit including refrigeration; separate design of the cooling capacity is not required. Condition, history and process: Year of manufacture 2021, commissioning in week 40/2021, approximately 180 operating hours, exclusively for palm oil-free bread spreads including nut-containing masses. Stored in Wuppertal since the end of 2024, inspection by appointment. Documentation, operating manuals and conformity documents are available. Purchase value in 2021 including delivery and commissioning: 248,800 € (Sollich) plus 9,800 € (cooling unit) = 258,600 €. The machines are also available individually. Sale from business to business, excluding warranty, technical specifications according to manufacturer's documents, errors and omissions excepted.

Condition: used, Technical details: material width: 400 mm material thickness: 2 mm Number of Straightening rolls: oben/upper/arriba: 5x Number of Straightening rolls: unten/lower/abjo: 6x roll width: 410 mm throughput speed: 9-20 m/min total power requirement: 5,5 kW Weight approx.: 1,3 t Kodsu Ic Dyopfx Afdonb space requirement of the machine approx.: L:2,1xB:1,0xH:1,35 m description: - upper rolls adjustable around 14mm, not driven - lower rolls not adjustable, driven - each 1 intake/output roll (dia 35x410mm) equipment: - drum intake (L:1,2xW:0,7xH:1,16m), with 4 pcs rolls and guidance waggon - 2 intake limits / output limits This straightening machine must be electrically integrated by the customer! *

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer. Ksdpfxszn I Aaj Afdsnb

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: three-phase, space requirement height: 5,500 mm, Equipment: documentation/manual, # Used Bag Palletizer Italproject MAXIPAL SV – up to 50 kg – 900/1,200 bags/hour Knjdpfxjzq Sd Hj Afdsb We offer this used Italproject MAXIPAL SV automatic bag palletizer, year of manufacture 2009, designed for top-entry palletizing of bags weighing up to 50 kg. The machine is suitable for automatic end-of-line palletizing applications in sectors such as chemicals, fertilizers, animal feed, pet food, building materials, flour, sugar, seeds, powders and granular products. ## MAIN FEATURES * Automatic top-entry bag palletizer * Bag weight: up to 50 kg * Production speed: approximately 900–1,200 bags/hour * High-level bag infeed conveyors * Motorized bag flattening / pressing unit * Bag turning device * Roller pre-forming unit * Layer-forming pusher system * Opening layer deposition platform * Perimeter layer compacting system * Motorized pallet lifting carriage * Motorized empty pallet magazine * Adjustable pallet magazine width * High-level slip-sheet / interlayer magazine * Automatic interlayer positioning arm * Motorized pallet roller conveyors ## DOCUMENTATION AND TECHNICAL SUPPORT The machine is supplied with: * Technical manuals * Electrical diagrams * Available technical documentation * Source software Duetti Packaging owns the Italproject know-how and can therefore provide spare parts, technical assistance, maintenance and engineering support for this machine. This represents an important advantage compared with many other used palletizers on the market, as spare parts and technical support remain fully available. ## REVAMPING AND CUSTOMIZATION Upon request, Duetti Packaging can provide: * Complete machine overhaul * Mechanical revamping * Electrical and software revamping * Modification for new bag sizes * Adaptation to different bag types * Modification of palletizing patterns * Preventive and corrective maintenance * Installation at customer's site * Commissioning and start-up * Operator training * Spare parts supply * Updated technical documentation * New certification, where technically and legally applicable * Warranty on the activities performed by Duetti Packaging according to the agreed scope of supply ## OPTIONAL – INLINE PALLET WRAPPER An original Tecnowrapp P60 automatic rotary-platform pallet wrapper is also available. The wrapper can be supplied together with the palletizer to create a complete automatic bag palletizing and pallet wrapping line. ## TYPICAL APPLICATIONS The palletizer can be evaluated for handling different types of bags, including: * Fertilizer bags * Animal feed bags * Pet food bags * Flour bags * Sugar bags * Seed bags * Chemical product bags * Building material bags * Powder product bags * Granular product bags Compatibility with a specific product, bag size, bag material or palletizing pattern must be technically verified. For further information, photos, videos, technical specifications or to evaluate a possible revamping of the palletizer, please contact us. DUETTI PACKAGING SRL

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 2188, input voltage: 400 V, product width (max.): 1,500 mm, SWAH LCP-01 A high-performance, automated production line for the manufacturing of rectangular ductwork. The SWAH LCP-01 is a robust European system designed to transform coil material into finished, reinforced rectangular duct sections with maximum efficiency. Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model: LCP-01 • Year of Manufacture: 2003 • Serial No. (M. No.): 2188 • Application: Fully automated production of rectangular ducts from coils. This line is a complete system, including • 4 Decoilers Station: To hold and feed heavy sheet metal coils (allowing for quick changes between different material thicknesses or widths). • Straightening & Leveling Unit: Ensures the sheet metal is perfectly flat before processing. • Beading/Stiffening Station: Automatically forms longitudinal stiffening ribs (V-profile) to ensure the structural integrity of the rectangular ducts. • Automated Notching & Cutting: High-precision hydraulic system for cutting to the exact programmed length. • Folding/Bending: Processes the material for easy "L" or "U" shape formation or full duct sections. Knsdpfezbh Aujx Afdjb • Material Thickness: Galvanized Steel: 0.4 mm – 1.2 mm Stainless Steel: 0.4 mm – 0.8 mm Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: good (used), Year of construction: 2013, operating hours: 36,163 h, functionality: fully functional, displacement volume: 59 cm³, total length: 3,000 mm, total width: 1,600 mm, total height: 3,480 mm, overall weight: 3,540 kg, Equipment: documentation/manual, ARBURG Allrounder 375 V 500-170 Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold opening distance: 302 mm Opening stroke: 225 mm Platen size (diameter): 900 mm Ejector force: 70 kN Knedpfjz Ayhqjx Afdob Centering of moving platen (diameter): 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 ccm Injection pressure: 2500 bar Screw length: 24 l/d Screw speed: 35 rpm Screw torque: 210 N Number of heating zones: 5 Dimensions & Weight Machine dimensions (L x W x H): 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment Screen text in German Rotary table Hydraulic core pull (1x) Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface Interface for ejector plate locking

Condition: excellent (used), functionality: fully functional, clear span: 2,700 mm, total height: 10,050 mm, load per truss pair (max.): 2,000 kg, load capacity per storage section: 10,000 kg, number of shelf rows: 5, overall weight: 14,500 kg, This used Jungheinrich MPB pallet racking system is a high-performance, heavy-duty racking solution for industrial storage requirements. The modular high-bay racking system is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a load capacity of 2,000 kg per level and a bay load capacity of 10,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. The pallet racking system on offer has a total of 648 pallet spaces, including spaces on the floor level. At a total price of €14,240.00 net, this corresponds to a price of only €21.97 net per pallet space. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 100.00 m - Level load: 2,000 kg per level - Bay load: 10,000 kg - Beams: approx. 360 × 12 × 5 cm - Beam color: yellow, painted - Uprights: approx. 1,050 × 110 cm, pre-assembled - Upright color: blue, painted - Levels: Floor + 5 beam levels - Pallet spaces: 648 including floor spaces - Price per pallet space: €21.97 net - Condition: Used, Jungheinrich MPB SCOPE OF DELIVERY: - 28 × Uprights, approx. 1,050 × 110 cm, pre-assembled - 270 × Beams, approx. 360 × 12 × 5 cm - 540 × Locking pins PRICE: €14,240.00 net €16,945.60 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner logistics company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers is also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer for you – tailored to your specific requirements. Whether it's a new installation, a renovation, or an extension – we will provide you with expert advice on your racking configuration. SHOWROOM: Feel free to visit us in our showroom! You can get a comprehensive overview of our pallet racking systems, storage racking systems, and other solutions. Many systems are set up and can be experienced directly. Our specialist consultants will be happy to answer your questions and provide individual advice – we look forward to your visit! Knedjz Dut Uspfx Afdob HAVEN'T FOUND THE RIGHT ONE YET? Visit our website. Here you will find a quick overview of many other offers and models. ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company website. ☎️ You can reach us by phone from Monday to Friday from 08:00 to 16:00. Alternatively, you can send us a message with your name and telephone number. We will get back to you as soon as possible.

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. Kodpfx Afozv S Nmedsnb If you have any questions or comments, please feel free to contact us.

Condition: used, Year of construction: 1996, SECOND-HAND CHAIR LEVELLING MACHINE COMEC MOD. EGS - Volt. 380/50 Knsdpfswrb R Iox Afdjb - S/N 960416 - CE rules year 1996

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. Kodpfxjq H H Ruj Afdsnb In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new Knsdszlpv Ajpfx Afdsb • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: used, Electric oven with 8-level proofer Dimensions without stand (WxDxH): 780 x 1030 x 2100 mm Dimensions with stand (WxDxH): 780 x 1030 x 2400 mm Oven Kjdpjyhfubjfx Afdsnb -Model: RS10A20-1 -10 levels -Tray size: 400x600 mm -Power: 18.6 kW -Voltage: 3x400V + N + PE / 50Hz -Serial number: 10NL C0143 Proofer RE16A-S -8 levels -Serial number: ETNL C0093 -Power: 1.2 kW -Voltage: 1x240V+PE / 50Hz -Refurbished equipment: Equipment is prepared upon order, pick-up and return times are agreed at that moment (price after refurbishment - please request a quote)

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Knsdpezizpcofx Afdeb Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: used, mileage: 1,21,459 km, power: 100 kW (135.96 HP), first registration: 09/2021, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 4, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Vehicle number (for inquiries): 195 Mercedes-Benz Vito 114 CDI MIXTO KOMPAKT. Single owner. Fully dealer-maintained exclusively at Mercedes-Benz (last service scheduled for 08/2025 at 116,646 km). Paint Code: * 9147 Paint color Arctic White MB 9147 Interior: * VF4 Caluma fabric, black Equipment: * 9147 Paint color Arctic White MB 9147 * BB7 CO2-optimized braking system * C447 - * C70 Pedestrian protection * CF9 Basic chassis Plus * CL4 Multifunction steering wheel with trip computer * E07 Hill-start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for starting process * E3C Audio 30 * ED4 Fleece battery 12V 92 Ah * EL8 Two-way speakers, front * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F447 - * F61 Interior mirror * F66 Lockable glove compartment * F68 Heated and electrically adjustable exterior mirrors * FF1 Center console with storage compartment * FKB Combi variant * FR1 Non-retractable rear view camera * FR8 Reversing camera * GC9 6-speed manual transmission Fsg 350 * H00 Warm/cool air duct to passenger area * H20 All-around heat-insulating glass * HH9 Semi-automatic climate control Tempmatic * HI1 Climate zone 1 (cold/comfort) * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IN1 Wheelbase 3200 mm, short overhang * J55 Seat belt warning device for front passenger seat * JA1 Warning lamp for windshield washer fluid level * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JK3 Instrument cluster with pixel matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main fuel tank 70 liters * KP6 SCR emission control generation 3 * L Left-hand drive * LA2 Light assistant * LD9 Rear compartment interior lighting * LE1 Adaptive brake light * LX2 3-month market rule * LX5 Europe * M44 Alternator 14 V/185 A * MG9 Generator management * MJ8 ECO start/stop function * MK8 Speed limitation 210 km/h * MS1 Cruise control * MT2 Emission class Euro 6D-TEMP N1 * MX0 BlueEFFICIENCY Package * MX8 Engine OM622 DE 17 LA 100 kW (136 HP) * Q22 Fixed-ball trailer coupling * R21 Wheel size group 1 * RF1 Tire brand Continental (10) * RG6 Tires 195/65 R16 * RM7 Summer tires * RS3 Steel wheels 6.5J x 16 * S00 Airbag control unit generation AB12 * S04 Adjustable passenger seat * SA6 Passenger airbag * SB1 Driver comfort seat * T14 Active retainer sliding door * T70 Child safety locks in passenger compartment doors * U60 Passenger compartment seating: 2-seater bench, 1st row * V30 Paneling of side wall in cargo/passenger compartment * V43 Wooden floor * VD2 Standard roof lining * VF4 Caluma fabric, black Knodpfx Afjx Rtaxjdob * VV9 Fixing points in roof frame * W16 Fixed window front left in side wall/sliding door * W17 Fixed window front right in side wall/sliding door * W65 Tailgate * W70 Tinted windows in rear compartment, privacy glass * WA0 Factory control code * WL9 Factory control code * WM0 Model update control code * WN7 Factory control code * X30 Registration certificate part 2 * X99 Manufacturer Mercedes-Benz AG * XC9 COC documents * XG6 Weight variant 2,800 kg * XI1 Change year G1-I * XM0 Model update * XM8 Ste...

Condition: excellent (used), Year of construction: 2014, 32.4 m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Rack length approx. 32,400 mm Upright height: approx. 6,000 mm Upright depth: approx. 1,100 mm Upright type: PLFB 16P Clear bay width: 3,600 mm Number of bays: 9 Number of levels: 4 (6 beams + floor storage) Beam type: PNB 0436 Max. pallet weight: 1,000 kg Permissible bay load: 4,000 kg Permissible bay load: 20,000 kg Kedpfx Ajydm N Sjfdsnb Upright finish: blue painted (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 10 x uprights 6,000 x 1,100 mm, bay load 20,000 kg, blue 54 x beams 3,600 mm incl. Safety pins, load capacity 4000 kg, orange Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Knedpfszz Aqlox Afdjb Pulsed coolant system The machine is ready for operation, we can ship the machine to your address.

Year of construction: 1975, condition: good (used), 11 rolls, Ø 130 mm strip width: max. 1.900 mm strip thickness: max. 10 mm Kedednztkspfx Afdsnb

Condition: used, functionality: fully functional, This used STOW pallet rack is a compact, high-performance heavy-duty racking system designed to meet industrial warehousing demands. The modular high bay racking is ideally suited for logistics centers, industrial applications, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load of up to 9,000 kg, this immediately available pallet racking system provides an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 1,400 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm PNB0472 - Beam color: yellow powder-coated - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue powder-coated - Levels: Floor + 4 - Pallet positions: 75 including positions at floor level - Version: Used STOW system SCOPE OF DELIVERY: - 06 x frames (approx. 1,050 x 110 cm), pre-assembled - 40 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 80 x safety clips Price: €2,080.00 net €2,475.20 gross An invoice with VAT shown will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner carriers – freight costs depend on your postal code - Professional assembly and dismantling by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers possible PLANNING & CONSULTING: Our planning department will be happy to prepare a tailored, no-obligation offer according to your requirements. Whether for new builds, conversions, or expansions – we provide expert advice on your racking configuration. SHOWROOM: We invite you to visit our showroom! Here you can get a comprehensive impression of our pallet racks, storage racks, and additional solutions. Many systems are on display and ready for hands-on inspection. Our expert advisors are available for your questions and personal consultation – we look forward to welcoming you! Kodpfsz Du Dtjx Afdsnb Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Please contact us via message or phone call. You’ll find our phone number on our company profile. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will call you back as soon as possible.

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data - Capacity: up to 25,000 bph Knodpowhw Sgofx Afdob Scope of Delivery  - Fill level and closure inspection system | KHS - Label inspection system | Indspect

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, machine/vehicle number: MA0171, Ex-display model available immediately: Screw compressor ALMIG BELT XP 15 - 10 bar (air cooled) Year 2025 Hours: 3 Bh Technical specifications Type: BELT XP 15 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1,95 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 15 kW Operating voltage / frequency: 400/50 V / Hz Knodez Dwy Dspfx Afdob Sound pressure level (DIN 45635 T.13): 71 dB (A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 370 kg Compressed air connection: G 3/4" Visit our store.

Condition: used, Year of construction: 2010, machine/vehicle number: 2067, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: AC, total height: 2,000 mm, total length: 1,500 mm, total width: 2,000 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, TARTLER NODOPUR VS-AR-2K – 2-Component Metering and Mixing System – Year of Manufacture 2010 – For sale is a used 2-component metering and mixing system, TARTLER NODOPUR VS-AR-2K. It was used in an industrial setting and shows corresponding signs of wear. Technical data: • Manufacturer: Ing. Büro Tartler GmbH / TARTLER • Type: NODOPUR VS-AR-2K • Machine No.: 2067 • Year of Manufacture: 2010 • Operating Voltage: 400 V AC • Frequency / Current Consumption: 50 Hz / 20 A • Power according to nameplate: 6.5 kW • Operating Pressure according to nameplate: 6–8 • Dimensions: approx. 1,500 × 2,000 × 2,000 mm incl. refill system • Weight: approx. 750 kg, depending on the equipment Control / Drive • Siemens PLC / SIMATIC Panel MP377 • Frequency Inverter A/B: Lenze, 1.50 kW • Drive Motor A/B: 1.50 kW • Mixing Head Type: LC 6/3 • Electric Motor Mixing Head: Emod, 1.1 kW Metering Technology Component A • Metering Pump: KTS 32 • Delivery Volume: 32 cm³ / 30 ccm/stroke • Volumetric Meter: VSI 0.1/16 EPC S4V Component B • Metering Pump: FPN 16.0 • Delivery Volume: 16 cm³ / 16 ccm/stroke • Volumetric Meter: VSI 0.2/16 EPO 12 V Containers / Material Supply • 1 × Stainless Steel Container A, approx. 60 liters • 1 × Stainless Steel Container B, approx. 60 liters • Containers with Mini-/Maxi-Level Monitoring • Container Pre-Pressurization • Silica Gel Filter • Container Agitator • Automatic Refill from 200-Liter Containers • Diaphragm Pumps for Component A and B Hose Assembly • Component A: approx. 6.12 m / DN 16 • Component B: approx. 6.42 m / DN 10 Equipment: The equipment includes, among other things: • Metering and mixing system for two components • Mixing head • Siemens control panel Knedjzvmihopfx Afdeb • Metering pumps A and B • Volume flow measurement • Stainless steel material containers • Agitators • Automatic refill system • Diaphragm pumps • Hose package • Signal light / Traffic light • Control cabinet • Various sensors and pressure regulators Condition: The system is in used condition. Age- and use-related signs of wear as well as material residues are present. The optical condition can be clearly seen in the current photos. An inspection of the system is possible after prior appointment. A function test can also be carried out after consultation. Sale: Price: €17,500 (negotiable) plus VAT. Inspection and collection by appointment. Sale preferably to commercial businesses. If you are interested or have technical questions, we will be happy to send you further pictures and information.

Condition: used, Year of construction: 1981, Class/vehicle type: semi-trailer tractor and tractor unit, body type: closed, color: green, curb weight: 6.084t, gross vehicle weight: 10.6t, max. permissible axle load axle 1: 6.2t, max. permissible axle load axle 2: 6.2t, drive type: diesel, max. speed: 95km/h, power: 110kW, displacement (P1): 7675cm³, rated speed: 2600rpm, stationary noise level: 90dBA, engine speed for stationary noise measurement: 1950rpm, mileage: 235,340km, with documentation. An on-site inspection is possible. Kedez Aggmepfx Afdjnb

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Knedpfezxxifox Afdsb Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.