Combined machine

Felder Bf 6-31

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Dwedpfxeyzdnbe Ap Dec Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Subject to price changes, errors, misprints and typographical mistakes excepted. Dodpfxswzzh Ej Ap Dswc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Dwjdsvz E Siopfx Ap Djc Total power requirement 2,2 kw

Condition: good (used), Code: 0400 Brand: SCM GENIUS Model: M 10/SI Universal 6-works combined machine with 3 motors for woodworking, joinery, furniture, custom-made furniture , window and door frames, doors and various Specifications: Three-phase motors V.380/50 Surface planer: Total table length 1400 mm Table width 300 mm N° 3 blades Motor Hp 3 Thickness planer: Max planing width 300 mm Max planing thickness 150 mm Feed speed 7 mt/min Table lifting by handwheel Circular saw: Max blade diameter 250 mm Hole 20 Max cutting height 85 mm Max cutting width 700 mm Blade tilt 0–45° Motor 2 Hp Dwsdpfx Apszbu Aze Doc Panel saw: Flag-type sliding carriage mounted on a movable bar Spindle moulder: Spindle diameter 30 mm Vertical stroke 120 mm Spindle speed 3000/4500/6000/7500 rpm Max tool diameter 150 mm Max spindle projection over table 100 mm Motor 2 Hp Mortising machine: Table dimensions mm 200 x 400 Spindle 0–16 mm Longitudinal stroke 150 mm Transverse stroke 90 mm Vertical adjustment by handwheel Overall dimensions of assembled machine mm 2000 x 1400 x 860 h Weight kg 450

Condition: good (used), Table milling machine, table milling machine Dwjdpfecl Svvox Ap Dec -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Dwedpoxq N T Eofx Ap Dsc Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 627 kg, maximum load weight: 2,073 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 170 2700 2, Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Sideboard height: 30cm Loading platform height: 66cm Total weight: 2700kg Payload: 2073kg Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sideboards with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED marker lights at the front Rear lamps with reversing light and triangular reflectors Upper frame mounted on rubber bearings Large tipping angle of 51 degrees to the rear Hand pump with adjustable handle Dwjdpfx Apeghpcaj Doc OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without sideboards (price reduction) -Sideboard height increased to 35cm -Black Edition (Powder-coated sideboards and rims in black) -Integrated loading ramps 2800kg -Electric tipping operation -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension sideboards 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available on request! Plus shipping to Gera and vehicle registration certificate, 200 € net Pictures are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh We also have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come directly to us.

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm Dwodpfx Ajhfufgop Dec -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: new, DEMONSTRATION MACHINE For sale is a like-new band sawmill with a cutting length of 3,700 mm. The demonstration machine is in its original condition, therefore you will receive the full warranty. - Max. log diameter 550 mm - Max. board width 530 mm - Max. cutting length 3,700 mm (3.7 meters), extendable! - Min. cutting length 900 mm (0.9 meters) - Saw band stroke min./max. = 20/540 mm - Max. cutting depth 220 mm - Pulley diameter/width = 400/25 mm - Motor power 5.5 kW (4.0 kW S1/100%) - Motor power for height adjustment 0.12 kW - Saw band length 3,200 mm Djdpfx Asvy Ufvsp Dewc - Saw band speed 15 m/s - Overall length of the basic version 4,600 mm (4.6 meters) - Weight approx. 350 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: band sawmill, log band saw, band saw, machine Reference: R-A0117

Condition: new, Year of construction: 2026, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Djdjr Eli Topfx Ap Djwc Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -