Used Mubea Punching Tool Ø 55 Mm for sale (1,08,460)

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Pjdpoyvzkiefx Aggjpw Work area illumination via LED light strip in the area between the side frames.

Condition: used, linear rail with folding cams Height adjustable for attachment to hole punches Ppodpovcmrgofx Aggjw

Condition: used, diameter 550 mm hollow ca. 105 mm chuck width 105 mm weight / kg Ppedpfsykva Tjx Aggsw Face plate four-jaw chuck Diameter: Ø550mm Chuck width: 105mm Passage: approx. 105 mm

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Holp MultiGrip Bucket / MG.022.055 / MS01 / 550 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,400.00 net / €2,856.00 gross - Suitable for excavators up to: 2.2 tons - Weight approx.: 80 kg - SAE capacity: 53 liters - Cutting width: 550 mm - Max. opening: 530 mm - The bucket is manufactured entirely from HARDOX. - The MultiGrip combines a digging bucket and a grab in a single attachment. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grab rotation lines are required for operation - Robust bearing within the side wall - Secure gripping and transport - Sturdy shafts connect both claws (forming a three-point grip for smaller items) - Significantly lighter than a grab - Can hold up to 30% more soil during digging operations compared to standard buckets - Reduces damage from falling debris The MultiGrip is suitable for all digging and grabbing tasks, making it ideal for relocating stones, backfilling soil, as well as gripping wood and brush. It operates significantly faster than a conventional grab. It can pick up and sort all kinds of material, including soil and grass. Thanks to its unique shape, the MultiGrip bucket offers superior penetration and handles bulky material with ease. We stock many more immediately available Holp products in our inventory! Feel free to contact us at ... We are also happy to provide you with a financing offer upon request. Pjdpfxoyl Hdlj Aggspw We are an official sales and service partner for: - Holp - OilQuick - Weber MT - Magni telehandlers - DMS - Seppi M. - Westtech - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Subject to errors and prior sale. == More Information == New: Yes Application: Construction Unladen weight: 80 kg For more information, please contact Marius Herden.

Condition: new, Cluster tool C/D/E station thick turret punch tool for Amada, Lvd Ppjdpsiq Dmmofx Aggow Original style punch compatiable for Amada/Mate guide holder quick adjustable style compatiable for Mate/Wilson 90 guide holder

Condition: new, Cluster tool for Trumpf punch Pjdpfoiq Dmxex Aggopw

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe Podpfx Aozpw Dpeggopw CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: excellent (used), Countersink, countersink, deburring countersink, pipe deburrer -Manufacturer: Rhinos, Countersink 90° MT Shank Mount MK2 -Blade diameter: Ø 50 mm -Outer chamfers: 25-44 mm Psdpezp Hn Defx Aggopw -Internal machining range: 20-39 mm -Dimensions: Ø 50 x 160 mm -Weight: 0.9 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Holder for punching tool -Holes: Ø 60 mm Psdpjzpwq Nsfx Aggopw -Dimensions: see photos -Dimensions: 253/71/H104 mm -Weight: 6.6 kg

Condition: good (used), Vacuum pyrolysis cleaning oven, vacuum pyrolysis oven, pyrolysis oven, cleaning oven, vacuum oven Psdpfxezpii Do Aggjpw -Vacuum pyrolysis cleaning oven: Vacuum pyrolysis oven -Type: unfortunately without a type designation -Entrance opening: Ø 600 mm -Interior dimensions: Ø 600 x 2480 mm -Vacuum pump: 2.35 kW 1.33 m³/min -Individual components: see photos -Dimensions: 5200/1635/H1760 mm -Transport dimensions: 3200/1635/H1760 mm / 2000/650/H610 mm -Weight: 1210 kg

Condition: used, 3-jaw wedge-type chuck, SCHUNK Rota-S 160-42 Ppodpfjzpbq Tox Aggew Manual power chuck, No. 097780 Diameter: 160 mm Inner diameter: 42 mm Chuck mounting: short taper DIN 55029 D1-4 cam lock, Ø 63 mm Speed: max. 5200 rpm - Wedge-type power chuck with centrally adjustable jaws - 1 set of base jaws with hard top jaws for reversing - 3 sets of base jaws, type SCHUNK SFG 160, with soft top jaws for reversing Weight: 16 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Podpfxeznu Aye Aggopw -Stamping tool: Die holder with fine adjustment -Bore: Ø 25 mm -Dimensions: see photos -Dimensions: 300/250/H210 mm -Weight: 32.1 kg

Condition: good (used), Variator pulley, Vario adjustment pulley, Vario belt pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Lenze, Vario belt pulley with compression spring -Type: Simplabelt 11.213.016 -Outer pulley diameter: 160 mm -Diameter of the inner socket: 18 mm -Dimensions: Ø160 x 110 mm Podpfx Agewz U Ulegjpw -Weight: 3.4 kg

Year of construction: 2020, condition: new, Professional earth auger, Ø 400 x 1000 mm, with Hardox cutting edge. Ppodpfsdf R Rqox Aggow Robust earth auger for our carrier unit, or upon request, also for other mounting systems. Item No.: MT18-EB-400-1000

Year of construction: 2020, condition: new, The root cutter is equipped with 9 hardened, reversible cutting inserts that can be rotated multiple times when they become dull. The inserts have a long service life. There are inserts with 3 different cutting edge angles to optimally process different types of wood. You can also use the cutter to mill out flower boxes or perform other milling operations. Article number: MT18-WF300 Ppodpsdf Sd Sofx Aggsw

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm Ppedpfxoznk Aio Aggjw -Weight: 6.6 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Ppsdpfx Ajznklqjggew -Punch tool: Intermediate block -Bore: Diameter 65 mm -Dimensions: see photos -Dimensions: 370/250/H125 mm -Weight: 46.7 kg

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder Ppodpfx Ajznkldoggjw -Stamp holder: Stamp holder -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos -Dimensions: 120/90/H135 mm -Weight: 4.2 kg

Condition: new, Year of construction: 2026, faceplate diameter 1000 mm faceplate with 4 clamps: inkl. boring diameter 280 mm weight 419 kg 4-jaw faceplate K72 – Ø 1000 mm Pedpex S Rzcjfx Aggopw Our high-precision 4-jaw faceplate K72 1000 mm was specially developed for the secure and reliable clamping of a wide variety of workpieces on lathes – ideal for asymmetrical, rectangular or difficult-to-position components. Technical features - Diameter: 1000 mm - Design: 4-jaw faceplate, independently adjustable jaws - Material: High-quality cast body for maximum stability and vibration damping - Clamping jaws: Standard with hard clamping jaws Optional clamping claws according to customer requirements (soft, special shape, special size) - T-slot design: for flexible additional clamping forces - High concentricity with heavy workpieces - Suitable for large turning diameters and high clamping forces Mounting & standardisation The K72 faceplate is not standardised as a complete faceplate (no uniform DIN or ISO standard for diameter, jaw geometry or hole patterns). However, the machine mounting is based on common standards, e.g.: - DIN 6350 (centring mount) - DIN 55029 (camlock mount, e.g. D11 / D15) = This allows adaptation to almost any machine, either directly or via adapter solutions. Other sizes & designs available on request In addition to the K72 1000 mm, we also offer other large faceplates for heavy-duty and special applications: K72 1250 mm K72 1800 mm K78 1800 mm K78 2000 mm ? Delivery to order ? Customised mounting design ? Clamping claws na

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate Ppjdpfeznafysx Aggjw -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, Podjzm Sd Sepfx Aggopw -Punch tool: Intermediate block -Dimensions: see photos -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder -Stamping tool: die holder -Hole: Ø 35 mm -Dimensions: see photos Ppedpfx Agszm Sategew -Dimensions: 235/105/H130 mm -Weight: 11.1 kg

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, die holder Pjdpfx Agezm Samjgjpw -Punch tool: Intermediate block -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm -Weight: 6.8 kg

Condition: excellent (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Ppedpfozdq R Eex Aggew -Manufacturer: WIPA, radial fan pressure blower -Type: Ø 600 mm -Engine power: 4.0 kW / 2910 rpm -Inlet connection: Ø 215 mm -Outlet connection: Ø 150 mm -Fan wheel: Ø 600 x 40 mm -Dimensions: 675/1120/H880 mm -Weight: 83 kg

Condition: used, Max. Stanzkraft: 500 kN Reach out: 610 mm Quick change device Variablely adjustable spindle Inclusive assortment of punches and dies Ppjdpfx Agju T Nv Dsgsw Weight: 1700 kg Very good condition