Used Thf High Frequency Welding Machine for sale (77,591)

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system -Manufacturer: CLOOS, Qintron water-cooled MIG/MAG welding machine -Type: Qintron 400 -Max. welding power: 400 A -Water-cooled -Wire feed case: Cloos FC 100E-KIT 4-roller drive -Accessories: incl. ground cable, gas valve, hose assembly (see photos) -Dimensions: 1100/700/H1240 mm Bwsdpfex Hgunex Af Asu -Weight: 181 kg

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: Bjdpezfim Iofx Af Ajwu - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: used, Year of construction: 2015, Offer 26163 Technical data (approximate): - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection - Table frame: W 2000 x H 850 x D 700 mm - Footprint (approximate): W 1150 x H 650 x D 500 mm Bwjdpfx Aezg A Rijf Aou - Weight (approximate): 200 kg

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) Bwsdpfx Aortvi Rof Aeu WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 340, Offer 25032 Technical data: - Drilling capacity in steel ST 60: 50 mm Bsdpfx Afsyk Dp Nj Ajwu - Maximum drilling capacity in steel ST 60: 65 mm - Thread cutting device up to: M 60 - Drill spindle taper: MK 5 - Drill spindle stroke: 240 mm - Throat depth: 400 mm - Table with 2 T-slots: 720 x 560 mm - Max. distance table – drill spindle approx.: 850 mm - 4 feeds: 0.1 - 0.2 - 0.3 – 0.4 mm/rev - Feed gearbox infinitely variable with change gearbox - Spindle speeds infinitely variable: 40 - 1,600 rpm - Drive: 400 V / 5.5 kW - Space requirement approx.: W 850 x H 2,480 x D 1,350 mm - Weight approx.: 1,450 kg

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator Bsdpjrtvi Usfx Af Aswu - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: ready for operation (used), throat depth: 550 mm, Output: 25 kVA Bwedpfxsyk S Uts Af Asu Design size: 550 mm

Year of construction: 1998, condition: good (used), functionality: fully functional, Edge milling machine, manufactured by IMAC year of construction 1998 . Bjdozw Et Ispfx Af Ajwu Model : CB 18 . Series : B20 .

Condition: good (used), Year of construction: 2005, Professional and high-performance strapping machine from a renowned German manufacturer, with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system and a quick-change system for strap coils. - Up to approximately 50 straps per minute. - Strap release via a robust foot pedal. - Strapping tension is continuously adjustable. - Soft tensioning possible. - Automatic strap loop ejection when strapping is released without any packaged goods. - Wear-resistant strap guides with a quick-change system. Bwodpfozq Ekyjx Af Aeu - The machine is height-adjustable and can be moved using castors. - Documentation consisting of operating manual, parts lists, and circuit diagrams. The machine can be demonstrated while powered on.

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm Bwodpou H Acyefx Af Aeu - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg

Condition: used, Technical details: plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm Bsdpfx Afsu Ngfqo Ajwu WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Bodpoztyn Sefx Af Ajwu Electrode force: 235 daN Arm extension: 80-300 mm With synchronous welding control RS 11-2 With main switch

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available Bwedpfx Afoh N Sd Ue Asu - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, input voltage: 400 V, total height: 1,700 mm, total width: 1,300 mm, total length: 1,000 mm, welding power (max.): 45 kVA, overall weight: 850 kg, Welding and annealing of bandsaw blades is the stated application of this iDEAL BAS 120, year of manufacture 1997. Wood band saw blades are covered from 25 mm upward to the 120 mm maximum blade width. Annealing control is by pyrometer. Clamping is hydraulic, described as providing constant and repeatable welding pressure for the joint. The power supply is 400 V at a frequency of 50-60 Hz. Weight is 800 [kg] and dimensions are 1000*1350*1700 [mm]. Documentation consists of the operating manual, schematics and spare parts list; the remaining figures are given in the specification table on this page. Bwjdpfxszz R I Ee Af Aeu Band saw blades for wood 25-120 mm Bi-metal bandsaw 25-100 mm

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Bwsdpfxjzqfwms Af Aeu

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036 Bsdszrupzspfx Af Aewu

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system c/w tooling Bedew Hxiwepfx Af Aswu ----- Clearance Sales -----

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete Bwjdsy Au Eyjpfx Af Aju -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: reconditioned (used), functionality: fully functional, The used MIND DART DL4 rapid-feed milling machine is particularly suitable for tooling work, thanks to its tilting head and the ability to use a quill (including with automatic feed) with automatic lubrication of the guides. Bwodpfx Ajznvmyjf Aju Equipped with independent automatic feeds, it also includes a dividing head with tailstock and related gears, dividing set, and some tools. The machine has been refurbished to meet standards and is in perfect working order.

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Bwsdpsfxpfmofx Af Aeu Hand and foot remote control with speed display Very robust

Condition: used, Technical details: current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA Bjdpfx Afju Nwxbe Aewu equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! i.D. *

Condition: good (used), continuous welding machine, film welding machine Bwsdpfxevyq Duo Af Asu -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Bjdpfxoiknv Ee Af Aowu

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine Bwodpfex Hi I Dex Af Aju -Type: Pulsarc 350 -Max. welding power: 350 A -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm Bedpfx Ajwmnhpjf Ajwu - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg