Used Vasg Elite El-600St for sale (9,457)

Condition: used, mileage: 2,92,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,190 kg, first registration: 02/2011, emission class: euro5, color: silver, number of seats: 9, total length: 5,910 mm, total width: 1,993 mm, total height: 2,725 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, * Mercedes-Benz Sprinter 215 (similar to 315) with 8 + 1 seats – electric passenger door – air conditioning – * Diesel – 2,148 cc – 110 kW – 150 hp – TÜV approved – seat configuration 2 / 2 / 3 * Auxiliary heater / alarm system / automatic transmission / tow bar 750 / 2,000 kg – * German vehicle – German registration certificate – one owner – company fleet vehicle * Subject to errors, misprints, and prior sale * Please schedule an appointment for viewing and test drive * Contact: Andreas Vogel Todpjy A Uz Uefx Amkea Special Equipment: Hill-start assist, 13-pin trailer socket, passenger compartment ashtray, outside temperature display, 100 Ah battery, floor mats for passenger cabin, additional master key, heated rear window, rear door (opening angle 270 degrees), folding cover for storage compartment, fuel filter with water separator, metallic paint, spare wheel in drive tire spec, spare wheel carrier under frame end incl. jack, interior rear-view mirror, right electric sliding door, rear mudflaps, front mudflaps, comfort head restraints (passenger and driver seat), comfort passenger seat, heated driver seat, comfort driver seat, seating in cargo/passenger area: 1st row 2-seater bench, 2nd row 2-seater bench, 3rd row 3-seater bench, front stabilizer bar, reinforced shock absorbers, tank sender for auxiliary heater, rear door entry step, tinted rear glazing / privacy glass, luxury interior trim for cargo/passenger area, tachograph pre-equipment, driver compartment thermal insulation, cargo/passenger compartment thermal insulation, auxiliary hot water heater, additional heat exchanger, dual speakers front and rear. Further Features: Third brake light, storage net on left and right front seat backrests, adaptive brake light, front passenger airbag, driver airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated turn signals, Kombi chassis configuration, brake assist, roof lining, cab roof lining, rear door windows, rear door/tailgate windows with washer/wiper system, fixed windows in cargo/passenger area: rear left, rear right, front left, front right, lockable glove compartment, wood floor in cargo area, body type: Standard high-roof Kombi, child safety locks, main fuel tank 75 liters, headlight range adjustment, engine 2.1 L – 110 kW CDI CAT, passenger car registration, wheelbase 3,665 mm, smoker package, Euro 4 emission standard Gr. III low emissions, right sliding cargo/passenger door, 'Lima' cloth upholstery, adjustable front passenger seat, all-around glazing, ASSYST maintenance interval display, heat-insulating glass (windscreen with top band filter), permissible total weight 3.19 t, electric auxiliary air heater.

Condition: used, mileage: 100 km, power: 397 kW (539.77 HP), first registration: 03/2026, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space length: 5,600 mm, loading space width: 2,430 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, navigation system, soot filter, MAN TGS 35.540 8X4 Meiller Trigenius Three-Sided Tipper with Electric Tarpaulin Tjdpfjycbcksx Amkja * FOR RENT * German vehicle * Folding underrun protection * EURO 6 E * MEILLER TRIGENIUS body * Bordmatic (left side) * Three-way tipper * Electric sliding tarpaulin * 8 pairs of lashing rings on the loading platform * Bridge floor 6 mm * Drop sides 4 mm * Side walls 1,000 mm * Front wall 1,200 mm * Tipper platform (L/W/H): 5,600 mm / 2,380 mm / 1,000 mm * Tow coupling * 'M' cab * Cool box * MAN TipMatic 12 28 OD gearbox * Disc brakes on front axle * Drum brakes on rear axle * Cruise control with ACC * Emergency brake assist * Hill-start assist * Automatic climate control * On-board computer * MAN Easy Control * MAN Media Truck Advanced DAB+ radio with 7" color display and navigation * MAN sound system * 400 l fuel tank * 35 l AdBlue tank * AUX-in/USB in dashboard * Multifunction steering wheel * Sun visor for windscreen * Central locking * Roof hatch * Digital tachograph * Digital cockpit * Reversing camera * Turn assist system * Lane-keeping assist Sale exclusively according to our Terms and Conditions. Important note – Important information: Despite careful verification of all details in our listing, errors can sometimes occur. These may be due to transmission errors in the systems of various platform providers. We therefore point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it contains information for the initiation of a contract. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: used, Year of construction: 2018, operating hours: 7,453 h, Tracks, excavator Volvo EC 300 CL with GPS air conditioning quick coupler. only 7,453 operating hours Todpfox Amvnsx Amkea very good condition

Condition: used, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 08/1995, loading space length: 6,855 mm, loading space width: 2,474 mm, loading space height: 2,829 mm, * SAF axles * 40mm towing eye * Flatbed with tarpaulin * Tandem * Edscha sliding roof * Unladen weight: 3,670 kg Todpfx Ajwi Edajmksa -----Internal vehicle number: 9524----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp.

Year of construction: 2000, condition: good (used), Pressing force 28 t X-axis 2000 mm Y-axis 1000 mm Todpfxji Eld Uj Amkja Machine weight approx. 11000 kg

Condition: used, El. heated chamber oven, make Heraeus Type: PL 320 Tsdpfoxlq Tpox Amkoa Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm

Condition: good (used), mileage: 130 km, power: 125 kW (169.95 HP), first registration: 12/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,850 mm, total width: 2,220 mm, permissible axle load (axle 1): 1,950 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2024, Equipment: ABS, Apple CarPlay, EBS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, = Additional Options and Accessories = - Heated exterior mirrors - Co-driver's bench seat - Euro 6 - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Wireless charging function for mobile phones - LED daytime running lights - Front center armrest - Parking sensors - Radio DAB MP3 Bluetooth 4.0 - Immobilizer - Partition with window = Additional Information = General Information Number of doors: 2 Cabin: single License plate: V-72-LVX Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Maximum front axle load: 1,950 kg Maximum rear axle load: 2,100 kg Weights Unladen weight: 2,281 kg Payload: 1,219 kg GVWR: 3,500 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Maintenance, History, and Condition APK (Technical Inspection): valid until 12/2027 Todpfx Aezcqhcomkea Technical condition: good Optical condition: good

Condition: good (used), Year of construction: 1975, cutting width (max.): 1,070 mm, cutting length (max.): 1,070 mm, overall weight: 4,500 kg, front table length: 600 mm, total width: 1,600 mm, total height: 1,500 mm, total length: 2,200 mm, Paper cutting machine, stack cutting machine, good condition Todotwy D Ajpfx Amkja

Condition: like new (used), functionality: fully functional, mileage: 2,31,215 km, first registration: 04/2026, fuel type: diesel, maximum load weight: 100 kg, axle configuration: 2 axles, wheelbase: 3,690 mm, axle spacing: 3,690 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, number of gears: 6, suspension: steel-air, number of seats: 2, Year of construction: 2026, Equipment: ABS, air conditioning, airbag, central locking, compressor, onboard computer, tachograph, truck registration, NEW Isothermal Cell Tjdozai Shepfx Amkea NEW Lamar brand refrigerator unit one side door ATP FRCX certificate valid until 04/2032 tires with 90% tread remaining

Condition: excellent (used), functionality: fully functional, working width 230mm Tjdpfx Ajy N N T Ssmkja working height 160mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm (last one 50mm) manual jointer on last head rolls in the table electric regulation of top head variable regulated feeder to 36m/min chrome table pneumatic pressure of feeding rolls

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Todpfxoyktftj Amkoa Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: new, Year of construction: 2026, Powder coating oven 3,500 x 1,900 x 2,000 mm 1 Internal dimensions Length 3,500 mm 2 Internal dimensions Width 1,900 mm 3 Internal dimensions Height 2,000 mm 4 Substructure 1 set Steel profile 5 Walls 1 set Double-sided galvanized sheets, 1 mm thick, exterior RAL color 6 Insulation, walls, ceiling 1 set Mineral wool, 150 mm, 75 kg/m² 7 Floor Oven is equipped with 2 guide rails for loading carts 8 Temperature 220°C 9 Fans 1 unit 7,500 m³/h 10 Electric motors 1 unit 3 kW, 1450 rpm, 3-phase, 50 Hz 11 Thermal output 58 kW 12 Double doors, one-sided 2 units Insulated with mineral wool, 150 mm, 75 kg/m² Heating Indirectly via a thermal block 13 Thermal block 1 set Stainless steel, INOX AISI 316, heating with electric, heat-resistant fans and heat-resistant bearings, thermal block has overheating protection 14 Burner 1 unit Oven is heated electrically Tsdefhv Tcjpfx Amkea 15 Exhaust 1 unit Device for exhaust pipe, manual damper control

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Tsdpfxjy Uuwme Amksa Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Tedpey Uuu Eofx Amkea Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: excellent (used), El. heated continuous furnace system, make Safed consisting of: Magnetic feeder Hardening furnace Type: T 80/54 Ti Throughput: 540 kg/h Temperature: max. 950°C Conveyor belt: effective width 600 mm Effective height: 100 mm Heating power: 229 kW Heating length: 7.200 mm Temperature control zones: 9 Processing time: 15 - 150 minutes Gases used: nitrogen, methanol, ammonia, propane Oil quenching bath Liquid capacity: 4000 l Bath temperature: max. 80°C Washing system Annealing furnace Tsdpfx Ajy Ur Aajmkja

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Tsdpfx Asy Tx Rbemkoa

Year of construction: 2009, condition: ready for operation (used), Clamping force: 3000kN, locking force: 3300kN, max. opening stroke: 670mm, min. mould installation height: 330mm, max. mould installation height: 710mm, max. distance between mould platens: 1380mm, mould platen dimensions: 1040x950mm, distance between tie bars: 720x650mm, max. mould weight: 4.7t, max. weight on moving mould platen: 2.4t, max. weight on fixed mould platen: 3.6t, ejector stroke: 200mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 50mm, L/D ratio: 20, injection pressure at 400°C: 2426bar, shot volume: 530cm³, shot weight (PS): 480g, max. metering stroke: 270mm, max. nozzle stroke: 470mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 110kN, installed barrel heating capacity: 14.8kW, material hopper capacity: 110l, oil tank capacity: 700l, electric screw drive: 38kW, electric clamping unit drive: 37kW, pump unit power: 22kW, total installed power: 112kW, continuous sound pressure level: 78dB(A), length: 6500mm, width: 2000mm, height: 2300mm, weight: 15.7t, operating hours according to PLC: 28,890h, barrel heating: 35,656h, pump: 27,922h, documentation available. An on-site inspection is possible. Tjdpfx Aey Tx Rnomkja

Condition: used, Year of construction: 2016, Manufacturer: Schweyer Model: CB-EL Year: 2016 Type: Belt conveyor Power: 0.12 kW Variable speed drive Length: 270 cm Width: 65 cm Conveyor belt width: 150 mm Product delivery height: - Position 1: 160 cm - Position 2 : 180 cm Tedpfoy Hdqgox Amkea

Condition: used, Jonsored Chainsaw Mill EL-600, 9m cutting length, electric motor, 5.5 kW, 600 kg, maximum log diameter approx. 500 mm Tjdpfjx H Udwsx Amksa Prices subject to change without notice; errors, misprints, and typographical mistakes excepted.

Condition: used, maximum load weight: 2,825 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 05/2026, total width: 2,539 mm, total height: 2,140 mm, Lorries Cable Transport Trailer S 222 with Electric Winch !!! FOR RENT !!! * External dimensions L/W/H: 4,889 mm / 2,539 mm / 2,140 mm * Payload: 2,825 kg * Permissible total weight: 3,500 kg * Unladen weight: 675 kg * 2 braked axles, 2 x 1,750 kg each * KNOTT axles * Overrun brake 3,500 kg * Tyres: 185R14C 5.5x14 ET30 * Electric winch with remote control * Jockey wheel * Wheel chocks * Side supports * LED lights * 100 km/h approval Tsdpfoy Sdvtsx Amkja * Maximum platform width: 1,650 mm Subject to prior sale and errors excepted! Sale exclusively under our Terms & Conditions. Important Notice - Please read: Despite diligent verification of all details in our listings, errors may occur. These may be due, in part, to transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB, but is for informational purposes as a basis for contract negotiations. All information provided is without guarantee and does not represent assured characteristics.

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm Tsdpsul Eawsfx Amksa table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: NR: 220.10.029.19, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, High-quality Format4 Tempora 60.06 EL edgebander for sale – ready to work! Take your production to the next level with this lightly used Format4 Tempora 60.06 EL edgebander in excellent condition. Built for industrial performance, this machine delivers outstanding precision and a flawless finish on every panel. - High-precision automatic edge banding - Pre-milling unit for perfect edge preparation - Reliable, consistent gluing system - Complete processing: trimming, milling, polishing - Easy operation and dependable performance Included extras: - Red air tank (as shown in the photos) - Additional heated glue pot – ideal for quick switching between different glue colors Todpoy Dg N Tefx Amksa Carefully maintained, lightly used, and fully operational – ready to be put straight into production. The machine is available due to factory restructuring. Contact us for more details or to arrange a viewing.

Condition: excellent (used), Year of construction: 1999, Four-side planer Manufacturer: Weinig Type: U 23 EL Year of manufacture: 1999 Number of spindles: 8 Working width: 20 - 230 mm Working height: 8 - 120 mm Planing table length: 2,500 mm Feed: 4 kW Tedpfevy Ebuex Amkoa Feed speed: 4 - 24 m/min Total power: approx. 60 kW 1 spindle: bottom horizontal 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 125 - 180 mm 2 spindle: right, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 250 mm 3 spindle: left, vertical 7.5 kW, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 200 mm 4 Spindle: Right, vertical 7.5 kw, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 250 mm 5 Spindle: Top, horizontal 7.5 kw, 50 mm diameter, 8,000 rpm, tool diameter: 112 - 200 mm 6 Spindle: Bottom, horizontal 7.5 kw, 50 mm diameter, 7,200 rpm, tool diameter: 112 - 250 mm 7 Spindle: Top, horizontal 7.5 kw, 50 mm diameter, 7,200 rpm, tool diameter: 112 - 250 mm 8 Spindle - saw unit: Top, horizontal 2.2 kw, 40 mm diameter, 8,000 rpm, tool diameter: 180 mm Including two conveyor tables

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Tjdpfxsx D Nx Ie Amksa Application Types Injection Moulding

Condition: new, Year of construction: 2026, Sliding saw Robland FZ 400 EL Voltage 400V Three-phase main saw motor S6 4 kW (3x400V) Scoring machine motor power 0.75 kW Tjdpfxslk Duas Amkja Z4 anodized sliding table 420 x 3200 mm Cutting length 3500 mm max. saw blade (without equipment) 400 mm, max. 350 mm with scorer Graduation 120 x 20 mm (without dial) Cutting height 90°: 125 mm, 45°: 90 mm Cutting speed 4000 RPM Weight 780 - 880 kg