Used Welding Wire 0.8 Mm for sale (78,504)

Condition: used, Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, load capacity: 2,000 kg, arm reach: 2,400 mm, Equipment: documentation/manual, For sale is a like-new IGM RTE 478-S welding robot, manufactured in 2022! This is a 7-axis robot with a 9-meter travel range and two stations, each equipped with a 2-axis L-manipulator with a load capacity of up to 2000 kg. Robot type: RTE 478-S in a suspended position. Control system: Fully digital PC robot control system, type RCE. Welding process: Single-wire welding process. Welding equipment: Digital inverter welding power source TPS 500i. The system can be inspected and tested upon request. Nledpfx Ais Ad R Easrsh The robot was operated in a single-shift operation and has few operating hours!

Condition: good (used), Pipe vise, pipe stand, pipe vise, plumber's vise, pipe holder Nljdpfj Afdgasx Airjh -Pipe vise: Pipe holder, solid pipe vise -Max. clamping range: up to 140 mm -Quantity: 2x pipe vises available -Price: per piece -Dimensions: 350/150/H390 mm -Weight: 16.4 kg/pc.

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Nljdpjk Radiofx Airjh Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), Spindle lifting gear, linear drive, linear gearbox, lifting gear, spindle lifting element, spindle drive, valve drive, actuator, lifting drive, trapezoidal lead screw -Manufacturer: Staff, screw jack gear -Type: Size 05, Version A -Usable stroke: 200 mm -Trapezoidal thread spindle: Ø 18 mm Nsdps Afnvfsfx Airjlh -Quantity: 4 pieces available -Price: per piece -Dimensions: 120/830/H315 mm -Weight: 2.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard Nodpfx Ajrh Nipsirjlh -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/80/H65 mm -Total weight: 2.4 kg

Condition: good (used), Forklift attachment, forklift shield, pallet fork, forklift fork, for wheel loaders, forklifts, telescopic handlers, forklifts, tractors, wheel loader mounting, adapter frame, universal carrier, fork carriage Nljdpfjtvb D Asx Airsh -Wheel loader attachment: Fork carriage 410 mm, heavy-duty design -Shaft diameter: 38/51 mm, dimensions see photos -Forklift attachment: can be supplied at an additional cost; a wide selection is available. -Dimensions: 1000/170/H670 mm -Weight: 134 kg

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Nlodpfx Ajzimbkjireh Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: as good as new (ex-display), feed length X-axis: 800 mm, planing width: 800 mm, Double-sided planer. In very good working condition. Njdpfsx Rryksx Airslh

Condition: good (used), Year of construction: 2017, operating hours: 14,500 h, functionality: fully functional, fuel type: diesel, color: white, Equipment: additional headlights, air conditioning, cabin, lighting, For sale is a used Syncrofalke 3t cable crane ("mountain harvester"), manufactured by Mayr Melnhof Forsttechnik GmbH for forestry operations. Year of manufacture: 2017 Equipped with a Woody 60 processor head (including a flail saw). Carriage: Sherpa U Carrier vehicle: MAN TGS Nlsdpfxjwtw Aps Airoh Can be inspected at any time during operation. Special features: Ideal for steep slopes and difficult terrain! Very robust design for full-scale forestry operations. Regular maintenance – ready for immediate use! Condition: Technically and visually well-maintained. Ready for use without any outstanding maintenance requirements.

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer Nledovy Tyxspfx Airjh

Condition: new, Year of construction: 2025, DON'T WAIT ANY MORE AND ORDER YOUR MACHINE We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during the guarantee period and afterwards. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Bending machine 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending capacity: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions Nsdpfxecka Suo Airjlh - Passage opening: 80 mm - degree scale - angle stop - Front and depth stops - Weight: about 400 kg - The roller scissors (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: €330.00 Cash on delivery Delivery within 4 days from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Nodpfsmhhf Sox Airslh When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Nlsdjmhhl Hjpfx Airoh Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Nlodpfxemhh Dts Aireh - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) Nodemidyfjpfx Airolh - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: good (used), The scope of delivery includes: 1x deep shelf support, used Shelf system: SSI Schäfer Material color: blue Overall length: approx. 1,060 mm For upright depth: approx. 1,050 mm Clear span: approx. 928 mm Profile dimensions: U 50 x 50 mm Crossbar support: approx. 65 mm Material thickness: approx. 3 mm Unit weight: approx. 3.53 kg The deep shelf support can be used with the following crossbar profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm IPE: 100 x 55 mm INP: 120 x 60 mm Box profile widths: - 40 mm - 50 mm - 60 mm General information about the item: Nlodpfolq Ewwox Airsh This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, Technical data for the pallet rack traverse: Rack system: Stow Type: Pal Rack NS Nodpolwkwdsfx Airelh Included in delivery are: 01x pallet rack traverse, new Material color: RAL 2004 orange box profile: 130 x 50 x 1.5 mm type of cross beam: PNB0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg, with evenly distributed load 02x safety pins, new execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. Nlsdpfx Aiomqk Svorsh 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Included in delivery are: 01x shelf connector, used for shelf distance: 360 mm total length: 360 mm cross section: U 35x25 mm material thickness: ca. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,480 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 Nodpfjmqldkox Airslh General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Meta (Thyssen) Nljdpfeuny A Sjx Aireh The scope of delivery includes: 01x pallet racking beam, used Material color: orange Box profile: 140 x 50 mm Beam type: HN 140|15 Bracket: 4 HK (hooks) clear width: 2,700 mm Max. load per pair of beams 4,000 kg, with evenly distributed load 02x safety pins, used Version: completely galvanized For securing the longitudinal beams Against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Connect Four – The Building Blocks of Success from DLK – Storage Technology | Levelmaker® | Logistics | Solutions OUR OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your individual requirements. Nedsvdqhbjpfx Airslh TRANSPORT & ASSEMBLY We are pleased to support you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The indicated price is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products across the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and the skilled trades. We constantly offer attractive used equipment from a variety of manufacturers and brands on favourable terms. If you have any questions, please do not hesitate to contact us.

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Storage platform, 12,000 x 5,000 mm, load-bearing capacity 500 kg/m² Dimensions/Technical Data: Dimensions of steel structure: 12,000 x 5,000 mm Dimensions of floor area: 12,000 x 5,000 mm Floor area: approx. 60 m² Height to top of floor covering: up to 3,500 mm (freely selectable) Clearance height underside: top surface minus 338 mm Nlsdpfx Asd Htr Roiroh Net load-bearing capacity: 500 kg/m² evenly distributed load Included in the scope of delivery: 8 uprights, single-sided 100 x 100 x 3 mm 6 main beams C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross beams S+300 x 2 mm, L = 4,800 mm (closed) 26 mounting brackets 3 diagonal bracing 24 chipboard panels P6, 3000 x 850 x 38 mm, underside white, top surface natural including fastening material including load signs Uprights available in the following standard colors: RAL 7035 light gray RAL 7016 anthracite gray RAL 3000 fire red RAL 5003 sapphire blue (other colors on request) Main and cross beams galvanized We also manufacture storage platforms to any other desired dimension. Prices on request. Accessories such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied for an additional charge. (Prices on request) Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Shelf testing Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), We are offering a second-choice deep strut from the manufacturer SSI Schäfer for sale. The deep strut is suitable for a frame depth of 850 mm and a crossbar width of max. 50 mm. The scope of supply includes: 1x deep strut, second choice Material color: Sendzimir galvanized Total length: approx. 865 mm For frame depth: approx. 850 mm Clear span: approx. 748 mm Technical data for the deep strut: Nsdohzt Epspfx Airolh Shelving system: SSI Schäfer Profile dimensions: C 60 x 40 x 8 mm Crossbar support: approx. 52 mm Material thickness: approx. 2.00 mm Unit weight: approx. 2.15 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Nsdpfsh Ad E Usx Airelh Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: excellent (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for the wide-span shelf crossbeam: Shelf system: Stow Type: Midirack Included in the scope of delivery: 01x Wide-span shelf crossbeam, used Material color: yellow Z-profile: 75 x 30 mm Crossbeam type: MNZBG 2274 Agraffe: 2 HK (hooks) clear width: 2,700 mm 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting out Note: The crossbeams are designed to support chipboard with a thickness of approximately 22 mm. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Our services at a glance: (Prices upon request) Assembly, installation our general assembly conditions apply Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the Nedpfx Aioh A Hxqjrslh requirements of BGR 234, visual inspection for all shelf systems Delivery with our own fleet (without unloading)