Used Wide Span Shelf Trusses Shelf for sale (7,711)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,567 h, load capacity: 2,500 kg, lifting height: 4,600 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,830 mm, motor manufacturer: Volkswagen, fork length: 850 mm, overall weight: 4,800 kg, empty load weight: 4,900 kg, total height: 2,830 mm, total length: 2,020 mm, total width: 2,270 mm, Equipment: CE marking, adjustable boom, cabin, pallet forks, Very good condition Wide fork positioner We sell forklifts after a full service. Prepared for the end user. Ready to use. Klodpfoy Av Tlsx Apyjr We can arrange transport within Europe and worldwide.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,157 h, load capacity: 6,000 kg, lifting height: 4,600 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,370 mm, fork length: 1,600 mm, overall weight: 13,300 kg, empty load weight: 13,300 kg, total height: 3,370 mm, total length: 2,980 mm, total width: 3,360 mm, maximum load weight: 6,000 kg, fuel: liquid petroleum gas (LPG), Equipment: CE marking, adjustable boom, air conditioning, cabin, lighting, pallet forks, Combilift C6000 is technically like new. Only 3157 hours!!! Air conditioning. Kledpfsy Av Rwsx Apyer We sell forklifts after a full service. Prepared for the end user. Ready to use. We can arrange transport within Europe and worldwide.

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Kljdpfoxnm Rcox Apyjr Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, working width: 630 mm, power: 9 kW (12.24 HP), Wide belt sanding machine SCM type Sandya Win. Sanding width 630 mm. Equipped with a combination unit for coarse and fine sanding. Electric drive. Operation possible with 16 amps. Transport within Europe available at competitive rates. Kedpfxsy Ec Eas Apyolr

Condition: used, Year of construction: 2018, total width: 1,800 mm, total height: 2,200 mm, total length: 1,900 mm, Empty weight: 1.500 kg Wide belt sander Klsdpfx Ajyz U Dmjpysr Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 18.03.7507 - Number of units [pcs]: 1 - └ Unit 1: - - Position: Top - - Type of unit: Sanding pad - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1100 - - Roller diameter [mm]: 150 - - Roller material: Rubber - - Motor power [kW]: 15 - Max. working width [mm]: 1100 - Min. working height [mm]: 3 - Max. working height [mm]: 152 - Feed motor [kW]: 0.55 - Feed speed: Manual - Min. feed speed [m/min]: 2.5 - Max. feed speed [m/min]: 8 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 28 - Fuse [A]: 32 - Power [kW]: 15.6 - Transport dimensions: 1900mm x 1800mm x 2200mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,873 h, load capacity: 3,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,400 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2011 – 7873 HOURS – LPG – DUPLEX 4100 mm – WIDE FORK POSITIONER – CONDITION 5/5 🔧🚀 Used and new forklifts with guaranteed quality – FT LOGISTICS 🏆 Ready for operation. No compromises. This COMBILIFT C3000 is more than just a machine — it is your assurance of smooth, reliable warehouse operations with zero downtime. Built for the toughest operating conditions, fully serviced both technically and visually, this unit is in near-new condition and ready for immediate deployment. 💼✨ Key Technical Specifications 📊 Year of manufacture: 2011 Operating hours: 7873 Drive: LPG (gas) Load capacity: 3000 kg Mast: Duplex – 4100 mm Fork positioner: 2700 mm | Forks: 1200 mm Tyres: Superelastic (100%) Technical condition: 5/5 – fully serviced, ready to work Visual condition: refurbished, no corrosion, like new Height: 2350 mm | Length: 2400 mm | Width: 1950 mm Kodpfx Aey Afrkspyolr Overall height: 2600 mm Tyres: Superelastic – Front 200/50-10 | Rear 23x10-12 Ideal for 📦🏗️ Warehouses with narrow aisles Timber, steel, and tube industries Handling long loads Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust. 🤝

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,453 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,000 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,350 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X50-15, overall weight: 12,450 kg, empty load weight: 7,450 kg, total height: 2,550 mm, total length: 2,700 mm, total width: 2,500 mm, color: green, motor model: V2403-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🔧 Years of Experience | In-house Service & Paint Shop 🎨 | Professional Advice 🧠 | Own Transport 🚛 | After-sales Support 🤝 Looking for a forklift you can truly rely on? We are a renowned dealer of new and used forklifts with a long-standing tradition. We serve clients all over Europe – from small businesses to large industrial operations. Our forklifts are more than just machines – they’re your guarantee of smooth and reliable logistics. ⭐ What Sets Us Apart? ✅ Every forklift undergoes a comprehensive technical overhaul (inspection, testing, oil & filter replacement, reconditioning of key components) ✅ UDT certification can be arranged upon customer request ✅ In-house paint shop and service workshop – machinery perfected both technically and visually ✅ Europe-wide transport using our own fleet and trained drivers ✅ Operator instruction on delivery + on-site performance test ✅ Post-sale service and technical support – we’re here for you after the purchase too ✅ Come and see or test our machines at our site – you’re always welcome! ✅ Hundreds of satisfied clients across Europe – join those who trust us ✅ Help with financing – we work with leading leasing companies Klodjy Afk Hopfx Apyor ✅ Invoice in EUR or PLN – you choose 📦 AVAILABLE NOW: COMBILIFT C5000XL – Multi-Directional Forklift 🔹 Year: 2018 🔹 Operating hours: 6,453 h 🔹 Power: Diesel 🔹 Lifting capacity: 5,000 kg 🔹 Mast: Duplex – 4,000 mm 🔹 Wide fork positioner: 3,550 mm | Forks: 1,300 mm 🔹 Superelastic tires – 100% condition 🔹 Technical condition: Excellent – after full service 🔹 Visual condition: Clean, corrosion-free, ready for work 📏 Dimensions: • Lowered height: 2,550 mm • Total length: 2,500 mm • Width: 2,700 mm • Positioner width: 3,550 mm • Structure height: 3,000 mm 🏭 Ideal For: ✔️ Warehouses with narrow aisles ✔️ Wood, steel, and pipe industries ✔️ Handling long or oversized loads ✔️ Indoor and outdoor operations

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,311 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, motor model: V2403-T, Equipment: CE marking, adjustable boom, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🎨 In-house service & paint shop | 📊 Professional consulting | 🚚 Own transport fleet | 🤝 After-sales support Are you looking for a reliable forklift? We are an established dealer of new and used forklifts with a longstanding reputation. We serve customers throughout Europe – from small businesses to large multinational industrial enterprises. Our forklifts are more than just machines – they are a guarantee that your logistics will operate seamlessly and reliably. ⭐ What makes us stand out? ✅ Every forklift undergoes a comprehensive technical overhaul (full servicing, inspection, replacement of filters and oils, refurbishment of key components) ✅ Full UDT inspection available upon customer request ✅ 🎨 In-house paint shop and service center – vehicles reconditioned both technically and visually ✅ 🚚 Europe-wide delivery using our own fleet with professional drivers ✅ 👨‍🏫 Operator training upon delivery + on-site functionality check at your location ✅ 🛡️ After-sales service and technical support – we continue to support you after the sale ✅ 🏭 View and test machines at our headquarters – arrange a visit! ✅ 🌍 Hundreds of satisfied customers throughout Europe – join our trusted partners ✅ 💶 Financing solutions available – we collaborate with leading leasing companies ✅ 📑 Invoices in EUR or PLN available – according to customer preference 🚜 CURRENTLY AVAILABLE: COMBILIFT C4500 – Multi-directional (4-way) forklift 📅 Year of manufacture: 2018 ⏱️ Operating hours: 4,311 h ⛽ Power source: Diesel 📦 Lifting capacity: 4,500 kg 📏 Mast: Duplex – 4,000 mm lift height 🔧 Wide fork positioner 3,100 mm | Forks 1,300 mm 🛞 Superelastic tyres – 100% condition 🟢 Technical state: Excellent – after complete servicing ✨ Visual state: Well-maintained, rust-free, ready for immediate use Dimensions: Kledey Afd Hspfx Apyor 📐 Truck height: 2,400 mm 📐 Overall length: 2,500 mm 📐 Width: 2,600 mm 📐 Fork positioner width: 3,100 mm 📐 Overall structure height: 2,800 mm 🏆 Ideal for: 📦 Warehouses with narrow aisles 🌲 Timber, steel, and pipe industries 📏 Long load handling 🏭 Indoor and outdoor operations

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,540 h, load capacity: 4,500 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 11,200 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,500 mm, total width: 2,600 mm, color: green, motor model: V2403-T, Equipment: CE marking, adjustable boom, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of experience | 🎨 In-house service & paint shop | 📊 Professional consulting | 🚚 Own transport fleet | 🤝 After-sales support Looking for a forklift you can trust? We are a reputable dealer of new and used forklifts with longstanding experience. Serving clients across Europe, we cater to small businesses as well as large international industrial companies. Our forklifts are more than just machines – they’re a guarantee of smooth and reliable logistics in your operations. ⭐ Why choose us? ✅ Every forklift undergoes a comprehensive technical inspection (full service, testing, filter and oil replacement, refurbishment of key components) ✅ Full UDT certification available upon request ✅ 🎨 In-house paint shop and service workshop – trucks fully reconditioned both technically and visually ✅ 🚚 European-wide transport with our own modern fleet and professional drivers ✅ 👨‍🏫 Operator training provided on delivery + functional testing at your site ✅ 🛡️ After-sales technical service and support – we are at your side even after purchase ✅ 🏭 See and test machines at our headquarters – you are welcome to visit! ✅ 🌍 Hundreds of satisfied customers throughout Europe – join those who trust us already ✅ 💶 Financing support – we cooperate with leading leasing companies ✅ 📑 Invoices issued in EUR or PLN – according to your preference 🚜 CURRENTLY AVAILABLE: COMBILIFT C4500 – 4-way forklift 📅 Year: 2018 ⏱️ Operating hours: 5,540 h ⛽ Power: Diesel 📦 Capacity: 4,500 kg 📏 Mast: Duplex – 4,000 mm 🔧 Wide fork positioner 3,100 mm | Forks 1,300 mm Ksdpfjy Afdtsx Apyelr 🛞 Superelastic tyres – 100% condition 🟢 Technical condition: Excellent, fully serviced ✨ Visual condition: Very well-maintained, rust-free, ready for operation Dimensions: 📐 Truck height: 2,400 mm 📐 Overall length: 2,500 mm 📐 Width: 2,600 mm 📐 Positioner width: 3,100 mm 📐 Overall height: 2,800 mm 🏆 Ideal for: 📦 Warehouses with narrow aisles 🌲 Wood, steel and pipe industries 📏 Handling long loads 🏭 Both indoor and outdoor operation

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 491 h, load capacity: 2,500 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: TOYOTA, gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 800 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16X6X10 1/2, rear tire type: superelastic tires (black), rear tire size: 23X10X-12, overall weight: 7,550 kg, empty load weight: 5,050 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚀 Years of experience | In-house workshop & paint shop | Expert consulting | Own transport | After-sales support 🔹 Looking for a forklift you can truly depend on? We are a renowned dealer of new and used forklifts with longstanding experience. We serve clients across Europe – from small businesses to major industrial corporations. Our forklifts are not just machines – they represent reliability and efficiency for your logistics operations. Kjdpfx Apjy Afabjyslr Why choose us? ✅ Every forklift undergoes a comprehensive technical inspection (service, function test, filter and oil change, key components reconditioned). ✅ Option for UDT inspection / TÜV approval on request. ✅ In-house paint shop and workshop – machines refurbished both cosmetically and mechanically. ✅ Europe-wide delivery with our trained drivers and company fleet. ✅ Operator training & functional demonstration at handover. ✅ After-sales technical support – we’re here for you even after the sale. ✅ Inspection & test drives possible at our premises. ✅ Hundreds of satisfied customers throughout Europe – join those who trust us. ✅ Financing solutions available – cooperation with leading leasing providers. ✅ Invoice in EUR or PLN – as preferred. AVAILABLE UNIT COMBILIFT C2500 – SHORT VERSION ONLY 1900 MM – DUPLEX 4600 MM – YEAR 2018 – 490 HOURS – LPG / GAS – WIDE FORK POSITIONER – EXCELLENT CONDITION (5/5) COMBILIFT C2500 – FOUR-WAY / MULTI-DIRECTIONAL FORKLIFT – FOUR-WAY DRIVE – MULTI-WAY SYSTEM 📅 Year: 2018 ⏱ Hours: 490 h ⚙️ Drive: LPG / Gas 🏋️ Capacity: 2500 kg 📏 Mast: Duplex 4600 mm 🔩 Fork positioner: 2700 mm | Forks: 800 mm 🛞 Tyres: Superelastic – 100% tread 🔧 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, ready for operation Dimensions: Height: 2350 mm Length: 1900 mm Width: 2300 mm Positioner width: 2700 mm Overall height: 2900 mm Ideal for: 🏭 Warehouses with narrow aisles 🏗 Wood, steel, and pipe industries 📦 Handling of long loads 🚚 Indoor and outdoor applications FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolt-together system Scope of delivery: 9 rack uprights, height 4,230 mm, with base plate, usable depth 1,200 mm 27 cantilever arms, usable depth 1,200 mm, with deflectors 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Without wood purlins and trapezoidal sheets for roof assembly) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE sections - All components with hot-dip galvanized finish - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, depth 1,200 mm with deflector = 4 storage levels vertically - Including longitudinal and diagonal bracing with 1,500 mm upright spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with prior notification before delivery. The goods are packaged for easy unloading. The installation surface must be concrete, level, suitable for anchoring, and capable of supporting the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Kedpfx Ash R Taqjpyolr

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. Ksdpfemhhypjx Apyslr The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Kodomhh Dhjpfx Apyjlr Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) Ksdefdkb Topfx Apyelr - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Kjdpfx Aomhh Dzepyelr - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Klsdpfx Ajmhh Anspyor 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Kledpfeguk A Hjx Apyjr Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Klodpfx Apeguk Dkjyjr - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. Klodpfx Asmhhy Njpysr We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Klodpfx Aomhh Dtspyor Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Kljdpfxeguk Dvo Apyer - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for the shelf panel: Racking system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x shelf panel, used Material color: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 594 mm Height: approx. 30 mm Weight per piece: approx. 8.12 kg Max. load per shelf panel: 75 kg, with evenly distributed load. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Kjdpfx Aoyzmn Dspyslr Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item entails extra costs, which can be requested from us separately, depending on delivery location or scope.

Condition: excellent (used), 1040 x 820 x 930 mm LWH Kedpjy Ec U Iefx Apyslr

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,537 h, load capacity: 3,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,700 mm, motor manufacturer: KUBOTA V1505-T, gearing type: hydrostat, fork carriage width: 2,700 mm, fork length: 1,100 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: cushion tires (black), rear tire size: 23 X 10 - 12, overall weight: 8,200 kg, empty load weight: 5,200 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 | 2014 | Diesel | Duplex 4100 mm | Condition 5/5 Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for work. No compromises. We offer a COMBILIFT C3000 – a robust multi-directional forklift designed for handling long and heavy loads in demanding environments. After comprehensive technical servicing, fitted with brand-new superelastic tyres, in near-new condition – ready for immediate deployment 🚀. A reliable solution for businesses that value stability, efficiency, and maximum uptime. 🔍 Key specifications: Year: 2014 | Operating hours: 7,537 Drive: Diesel | Capacity: 3,000 kg Load centre: 600 mm Mast: Duplex | Lift height: 4,100 mm Wide fork positioner: 2,700 mm Fork length: 1,100 mm Kjdpfxsyz U Ais Apyjlr Weight: 5,200 kg 📐 Dimensions: L/W/H: 2,300 / 2,300 / 2,350 mm Overall height: 2,700 mm 🛞 Tyres (NEW – 100%): Superelastic (solid) Front: 16x7x10 1/2 | Rear: 23x10-12 ⚙️ Equipment: Heated full cabin ❄️🔥 Wide fork positioner – ideal for long loads Duplex mast – excellent visibility 👀 Refurbished, corrosion-free ✨ 🏭 Ideal for: Narrow aisle warehouses Timber, steel, and pipe industries Indoor & outdoor operation ⭐ Why FT LOGISTICS? Proven machines Professional pre-sale service Verified condition – no surprises Transport & support available

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,093 h, load capacity: 3,000 kg, lifting height: 6,100 mm, free lift: 1,900 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, gearing type: automatic, battery manufacturer: MARATHON Classic (GNB Industrial Power), battery model: GNB Industrial Power, battery capacity: 465 Ah, remaining battery capacity: 92 %, battery voltage: 80 V, battery weight: 1,199 kg, fork carriage width: 3,500 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), front tire size: 405 / 305 – 260, rear tire type: polyurethane tires (non-marking), rear tire size: 23 x 10 – 12, overall weight: 9,700 kg, empty load weight: 6,700 kg, total height: 2,650 mm, total length: 2,100 mm, total width: 2,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, full service history, lighting, pallet forks, sideshift, COMBILIFT C3000STE – 2019 – 2093 HOURS – ELECTRIC – TRIPLEX 6100 mm – WIDE FORK POSITIONER 3500 mm – CONDITION 5/5 🔧🚀 Used and new forklifts with guaranteed quality – FT LOGISTICS 🏆 Ready for work. No compromises. This COMBILIFT C3000STE is more than just a machine — it guarantees smooth, reliable, and uninterrupted logistics operations. Built for demanding applications and fully reconditioned both technically and visually, this forklift is in like-new condition and ready for immediate deployment. 💼✨ Key Technical Specifications 📊 Year of manufacture: 2019 Operating hours: 2093 Drive: Electric ⚡ Capacity: 3000 kg Mast: Triplex – 6100 mm Fork positioner: 3500 mm | Forks: 1000 / 1200 mm Tyres: Solid rubber (100%) Technical condition: 5/5 – fully serviced, work-ready Visual condition: refurbished, corrosion-free, like new Height: 2650 mm | Length: 2100 mm | Width: 2950 mm Overall height: 2800 mm Tyres: SOLID – Front: 405 / 305 – 260 | Rear: 23 x 10 – 12 Free lift: 1900 mm Full heated cabin Guide roller system Ideal for 🏗️📦 Warehouses with narrow aisles Wood, steel, and tube industry Handling of long loads Kljdeyz Uyzepfx Apyor Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust. 🤝