Used Becton Dickinson Facscalibur Flow Cytometer for sale (3,775)

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 2731660/C 0000, functionality: not functional, operating hours: 44,050 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min Ledpforl Rwxex Ab Uert AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Year of construction: 1986, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-560-A -Volume flow rate: 22800 m³/h -Total pressure: 4200 Pa -Motor: Schorch 37 kW 1470 rpm Lrjdez Ehd Aspfx Ab Ujt -Inlet connection: Ø 560 mm -Outlet connection: Ø 560 mm -Fan wheel: Ø 940 x 200 mm -Protection class: IP 54 -Dimensions: 2830/1230/H1700 mm -Weight: 950 kg

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Lredeztma Ujpfx Ab Uot Documentation and GEA invoices are available for serious buyers. Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Year of construction: 2014, condition: used, X-axis: 2000mm, Y-axis: 1200mm, Z-axis: 1500mm, table surface: 2200x1200mm, number and width of T-slots: 7x22mm, distance between T-slots: 140mm, max. workpiece weight on table: 7.2t, working feed rate: 0-12,000mm/min, rapid traverse: 15m/min, acceleration: 1.5m/s², hydraulic unit power: 5.5kW, pump flow rate: 25l/min, working pressure: 110bar, tank capacity: 180l, cooling unit capacity: 6,100W, compressor power: 2.61kW, length: 5820mm, width: 6723mm, height: 3602mm, weight: 17t, spindle operating hours: 5,000h, with documentation, an on-site inspection is possible. Lrjdpfjz Ea Rzox Ab Uet

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X Lsdpoy Nb Tkofx Ab Ujrt - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: good (used), Record Panda1000 flow wrapper Ljdpfjnyilxsx Ab Uert Serial: 300376 flow wrapper, adjustable temperature jaws and crimpers, infeed length 1500mm, overall length 3500mm, variable speed, jaw width 300mm, 3Ph

Year of construction: 2021, operating hours: 180 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 35120005, Sollich Turbotemper® TE 1600 D, manufactured in 2021, is a chocolate, fat mass, and spread tempering machine. Tempering capacity ≥1,350 kg/h, actual max. consumption in previous operation approx. 1,200 kg/h. Operating process in three stages: Stage 1 – Heating stage to recrystallize the mass to approx. 45 °C, with a separate hot water circulation circuit, mass temperature-dependent control, and a water circulation pump with electric heating. The circuit also has a cooling function, so mass inlet temperatures above 45 °C can be compensated. Stage 2 – Cooling and crystallization zone, guaranteeing a constant crystal quantity regardless of the mass flow rate. Large cooling surfaces and precise temperature control; specially shaped shearing and mixing tools create a high shear gradient and accelerate the formation of microcrystalline, stable beta crystals. Stage 3 – Mixing zone for homogeneous distribution of the beta seed crystals. The mixing stage can also be operated as a cooling stage for lower starting temperatures or higher throughput at the same starting temperature. Equipment and features: • First-in/First-out principle, dwell time of all mass particles is the same • Siemens PLC with TP 900 (9") touch panel, parameters for up to 40 masses can be stored as retrievable programs • Reinforced drive with measurement of the power consumption, including visualization in the HMI. • Turbulent water flow, separate circulation pump for each stage, automatic power control • Two additional water control circuits in the frame: for heating the mass line to the mixing unit and the mass return line to the tank, as well as the line between the tank and the tempering machine, including operation via HMI. • Thermal start-up protection to prevent the machine from starting if it has not heated up sufficiently • Digital display of the mass inlet temperature, separate PT-100 sensor for the feed line • Safety pressure switch with digital pressure display, shuts off the feed pump in case of overpressure Lrjdozzvgtopfx Ab Ust • Preset programs "Tempering" and "Night" with automatic adjustment of all heating and cooling circuits. Included in the scope of delivery: Feed pump type SPN 1500 (2"), machine no. 35120010, frequency-controlled via the tempering machine's control. Bypass pump type SPN 1000 (2"), machine no. 35120015, frequency-controlled, operated via HMI. Connection: Cooling water 5–10 °C, customer-side, 2–4 bar, minimum differential pressure supply/return 1 bar; 400 V, 3 Ph, 50 Hz + neutral + earth. Dimensions according to manufacturer's drawing A 17555-2, available. Condition, history and handling: Manufactured in 2021, delivery and commissioning by Sollich in week 40/2021, approx. 180 operating hours. Used exclusively for palm oil-free spreads, stored dry in Wuppertal since the end of 2024, inspection by arrangement. Documentation, operating manual and conformity documents are available. Purchase value in 2021 according to order confirmation: €121,320 for the unit including the specified pumps and water control circuits. Sale from commercial to commercial, excluding any warranty, technical specifications according to manufacturer's documentation, subject to change. This tempering machine is also available as part of a complete tempering and mixing system (including nut mixing unit NM 200 VA and cooling unit), see advertisement ID A22725782.

Condition: excellent (used), Year of construction: 2015, Höcker Polytechnik Vacumobil VT 160-L clean air dust collector in good working condition, manufactured in 2015. Nominal volumetric flow rate: 1,450 m³/h Lodpfsz Dbazsx Ab Uort Maximum volumetric flow rate: 1,950 m³/h Power: 2.2 kW Intake nozzle diameter: 160 mm Vibration cleaning (motorized filter shaking) Dust class / residual dust content: H3 certified (< 0.1 mg/m³) according to TRGS Dimensions: approx. 160 x 100 cm, height 200 cm The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses, excluding any liability for material defects. No guarantee, warranty, or right of return.

Condition: used, Year of construction: 2014, Overview  The Millichilling ST-12, manufactured in 2014 by Millipore Ibérica S.A.U., is a stainless-steel normal flow filtration (NFF) unit designed for wine clarification prior to microbiological stabilization. It offers a cost-effective, environmentally friendly alternative to diatomaceous earth filters, preserving the wine’s sensory characteristics while supporting continuous operation. This unit is suitable for medium to large-scale wineries and is immediately available. Technical Details  - Capacity: 1,000–1,500 l/h (depending on wine turbidity) - Total Volume: 81 L - Applications: Final wine clarification before bottling — suitable for white, rosé, and red wines - Construction Material: Stainless steel - Max Operating Pressure: 5 bar Ledpow Nkqqefx Ab Ujrt - Max Temperature: 110 °C - System Type: Normal Flow Filtration (NFF) - Operation Modes: Automatic, semi-automatic, or manual - Design: Fully enclosed system with integrated reverse-flow cleaning  

Condition: used, Year of construction: 2017, functionality: fully functional, Working condition. Ask for additional information! Ledpfx Ajzkg D Ieb Ujrt

Condition: new, Product driven flow divider Capacity: max. 2.500 kg/h The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C With universal connection With quick closing system Available with 2 up to 12 exits NEW Lodpfx Abszx U Dxj Uort

Condition: good (used), functionality: fully functional, Year of construction: 2006, control type: CNC control, controller manufacturer: Fanuc, controller model: AMNC, laser type: CO₂ laser, laser power: 4,000 W, CNC laser cutting machine Amada LC 2415 alpha IV NT The machine is located in an operating facility and can be inspected while powered on. X working area max.: 2520 mm Y working area max.: 1530 mm Z working area max.: 300 mm Lredpfx Aezxtkkeb Uot Control system: Siemens Fanuc AMNC Laser power: 4000 watts Standard equipment: • Controlled axes: X, Y, Z (three axes are controlled simultaneously) • Maximum processing area: 5,040 × 1,550 mm (with repositioning) • Maximum simultaneous feed rate (X/Y): 114 m/min • Repeatability: ±0.01 mm • Maximum workpiece weight: 330 kg • Height of the processing surface: 820 mm • Dimensions of the workpiece channel: 550 × 1,750 mm • Laser type: CO₂ laser with fast axial flow and high-frequency discharge excitation • Maximum cutting thickness: • Mild steel: 10 mm • Stainless steel: 10 mm • Aluminum: 8 mm

Condition: good (used), Year of construction: 1986, working width: 500 mm, overall weight: 12,500 kg, machine/vehicle number: 017128, CASE IH 1660 axial flow Lrsdpfx Abevr Dxps Uot Brand: Case IH Model: 1660 Year: 1987 Operating hours: 3,300 h Cross-section width: 5.00 m Various types of equipment: straw chopper, straw spreader

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control Lrjdpoxc Eitjfx Ab Uet system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: type plate available, The Donaldson Torit dust extraction unit DFO 4-16 can be used for welding, cutting, and grinding. It is a non-ATEX unit. The accompanying fan is an ART 632 with a 22 kW motor (non-ATEX), designed for a flow rate of 16,500 m3/h. It was previously used in one of our factories for welding fume extraction. It has since been replaced by dilution systems and is therefore no longer needed. Ledszwclzepfx Ab Usrt

Year of construction: 2011, condition: used, functionality: fully functional, Tonnes produced - 1 800 000 Capacity - 350 t/h First erection in Poland - 2011 The machine has currently been dismantled into its component parts for transport. Cold feeders: Number of beans - 8/pcs Single bin capacity - 14 m3 Drying drum: Lenght - 11 m Diameter - 2,7 m Drum drive - 4 x 22 kW Burner - 2 types of fuel Burner capacity - 24 MW Mixing Tower Hot Bins: Number of fractions - 6 pcs Number of hot bins + baypass - 6+1 Total capacity of hot bins - 70 t Scales: Lodpfjy Nc Tfex Ab Uert Mineral scale max - 4 460 kg Bitumen scale max - 400 kg Filler scale max - 440 kg Puddle mixer: Mixer capacity max - 4 300 kg Mixer drive - 2 x 45 kW Ready mix storage: Total bins capacity - 90 t (2 x 45 t) Number of bins - 2 pcs Additives: adhesive, cellulose Bitumen tanks (vertical tanks system): Number of tansk - 4 pcs Total capacity - 320 t Electrical heating - 7,5+24 kW Filler silos: Silo capacity - 2 x 80 t Coal dust silo - 12 m3 Internal filler capacity - 80t Filter: Producer - DM-IF 750 Air flow - 101 138 m3/h Motor capacity: exhaust ventilator 160 kW Filtrating surface 1 125 m2 Plan height - 27 m Transpor costs on the buyer’s side.

Condition: used, driver cabin: other, gearing type: other, Other: * Trade-in and purchase of vehicles and machines possible. * Sales price excluding transportation and transfer. * No liability for printing & typing errors. * Errors, changes and prior sale reserved. * Offer subject to change. * Photos may differ. Price applies to existing condition. * All information without guarantee. Lredpfszlgxzex Ab Ust - .

Condition: used, Year of construction: 2011, operating hours: 2,200 h, functionality: fully functional, power: 7.5 kW (10.20 HP), year of last overhaul: 2026, We offer this used Schneeberger Norma CFG 7.5 kW tool grinding machine, manufactured in 2011, for sale. OPERATING HOURS: 2200! Automatic programmable central lubrication system Pneumatic hoses completely renewed 4/2026 Standard version PLUS: - Hydraulic quick tool clamping system - Grinding wheel spindle HSK 50 - Quinto-Basic-SW woodworking tools - Coolant filter unit 330l; 6.3 bar - CO² fire protection system Special accessories: - Manufactured in 2013 - Workpiece loader MIL incl. quick-change tool holder for profile cutters and shank tools - 1 piece of pallet for profile cutters - profile thickness: 2mm; plate width up to 150mm Machine Specifications – NORMA CFG (Schneeberger Invoice No. 88088, dated 21.12.2011) MAIN MACHINE M-55039-0031 – CNC Tool Grinding Machine "NORMA CFG" Power: 7.5 kW Machine No.: 21'692 Voltage: 400V / 3-phase / 50Hz Lodpszqu Tdsfx Ab Uort EQUIPMENT & OPTIONS M-51019-0021 – Automatic programmable central lubrication M-50019-0022 – Precision 3D touch probe PSM 118 M-82090-0003 – Network connection M-56009-1993 – Remote maintenance software, 2 years free M-50009-0191 – Dressing roller on mounting arbor M-530890098B – Hydraulic quick tool clamping, ISO 50 M-10030-0115 – Expansion collet chuck ISO 50, D=20 M-10030-0116 – Expansion collet chuck ISO 50, D=32 M-56039-0044B – Plate mount, hydraulic, horizontal M-50020-0211B – Intermediate layer 40 M-50020-0003B – Intermediate layer, standard M-56009-0643 (x6) – Grinding wheel mount HSK50, 20/70x85 M-45000-0000 – Quinto base software M-45000-0010 – Quinto standard tools M-45001-0210 – Quinto software eGrind viewer M-45000-7030 – Quinto software dxQ, woodworking inserts M-45001-0010 – Quinto easyPROFILE M-45000-1010 – Quinto software, woodworking tools M-50009-0190A – Flow monitor M-50019-0049 (x6) – Complete plate with coolant pipes M-55039-0059 – Coolant filter unit, 330 L, 6.3 bar M-50009-0036 – CO2 fire suppression system M-55039-0086 – Electrostatic extraction/suction unit M-600000-051 – Training in Roggwil/Weissach, 3 days M-600000-052 – Installation and follow-up training, 3 days in Gütersloh M-20000-0032 – Truck packaging M-20000-0050 – Transport incl. transport insurance (not unloaded), DAP DE-Gütersloh If you have any questions or need further information, please feel free to send us a message.

Condition: used, This listing is for a Quattroflow QF 1200-S Single-use Pump diaphragm pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF 1200-S is a sophisticated quaternary diaphragm pump specifically engineered for sterile fluid transfer in the pharmaceutical manufacturing and biotech sectors. Its compact design and advanced features position it as a top choice for applications requiring precision and contamination control. Here’s a closer look at its characteristics, advantages, and applications: Key Characteristics: Flow Rate: Capable of handling flow rates of up to 1200 litres per hour, making it versatile for various processing needs. Eccentric Shaft Design: Offers 3° and 5° angles for adjustable flow rates, tailoring the pump’s performance to specific applications. Pump Chamber Material: Available in both stainless steel for multi-use and polypropylene for single-use, catering to different operational requirements and preferences. Control System: Features an integrated pump controller (Q-Control) that allows for automated control and monitoring, enhancing operational efficiency and precision. Interfacing Options: Compatible with various flow and pressure sensors, ensuring seamless integration into existing systems for real-time monitoring. Model Variants: Includes several models such as QF30, QF150, QF1200, QF2500, and QF44, providing options to meet diverse process demands. Advantages: Low-Shear, Low-Slip, Low-Pulsation Performance: This design ensures the gentle transfer of critical biological fluids, preserving their integrity and functionality. Single-Use Positive Displacement Technology: Reduces maintenance costs significantly and enhances purification yields by minimizing the need for cleaning and validation. Total Product Containment: The unique seal-less design eliminates contamination risks and particle generation, ensuring the purity of the fluids being transferred. CIP/SIP-Capable and Autoclavable: Supports clean-in-place and sterilize-in-place protocols, making it suitable for sterile fluid transfer in highly regulated environments. Lrodpfx Asxxz I Rjb Ust Easy Installation and Replacement: The single-use pump chambers are quick to install and replace, streamlining workflows and minimizing downtime.

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Ledszba Nyopfx Ab Ujrt Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: used, Year of construction: 2023, functionality: fully functional, Good maintenance history and working conditon! Lrsdpszkr N Ajfx Ab Ujt Ask for specification and pricing!

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Ledpfx Absz Dq N Eo Uort Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures - production capacity: 32,000 bph at 1.0 L Lrjdoyluwtepfx Ab Uot - direction of rotation: clockwise - availability: beginning of October 2026

Condition: used, Rollers that are compatible with all types of pallet racking. This is not a complete system, but only the rollers. 2 sizes: 3000*1350 mm (approx. 33 pieces) 2500*1350 mm (approx. 99 pieces) Load capacity: 1000 kg/pallet If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and would be happy to assist you with your planning. Other accessories available, such as: Frame, corner and end protectors, push-through guards, chipboard, grating, back panel grating, deep beam supports. Shipping: Please inquire about the shipping costs, specifying your postal code and location, as well as the desired quantity of items. Further service offerings: Lrsdpfxoh Izr Uo Ab Uot Planning, shelving installation/disassembly, purchase/sale Changes and errors in technical data, information and prices, as well as sales subject to change without notice!

Condition: good (used), Approx. 8 units of mobile flow rack shelving from Creform, FiFo system, assembly frame with flow levels – used: Price per unit, ex works: €400.00 (net)! Manufacturer: Creform Type: Pipe and joint system Year of manufacture: unknown Dimensions: approx. 180x180x200cm 2 channels 9 swivel casters with brakes Roller rails Condition: good Available: immediately Lrjdpfxszp Rn Io Ab Uet Location: Leipzig