Used Biesse Rover Plast A Ft 1531 for sale (68,984)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fully equipped Biesse Brema EKO 2.2, including a return system and auxiliary units. Guedpfx Aezhbpaol Ajd Quick delivery.

Condition: used, Year of construction: 2001, Manufacturer : Forberg Model : FT20 Year: 2001 Type: Paddle dryer Description: The product is dried by blowing hot air through the mechanically suspended (fluidised) product. The humid air and suspended particles rise towards the primary filter. A fan blows the humid air into a three-stage water-cooled coil cooler. The condensate from the dehumidified air is drained from beneath the chamber. An electric heater reheats the cold, dry air, and the air returns to the mixing chamber. Material : stainless steel Nominal capacity: 20 litres Mechanical mixing: two counter-rotating blade shafts Variable speed: yes (see control panel) Forced-air ventilation: 1 cold-air fan and 1 hot-air fan Cooling unit: tube heat exchanger, external source fluid connection, condensate drain. Heating system: 20 kW Gedpfxjzbypyj Al Ajud Temperature and humidity sensor Product sampling Infastaub AJN 024 air filter / dust collector: surface area 2 m² Cleaning filters with compressed air PLC + HMI: Siemens These options are available and are subject to an additional quote Lump breaker for wet granulation. Liquid spraying Dimension : 326 x 97 x 230 cm Operating manual and wiring diagrams Video available when powered on  

Condition: used, maximum load weight: 29,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2007, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,329 mm, Year of construction: 2007, Equipment: ABS, 3-axle Schmitz Cargobull SKI 24SL 7.2 ALU box tipper VIN: 120059 Chassis / Components: * Air suspension / Raise and lower function * Lift axle 1st and 2nd axle * Automatic lowering during tipping process * Tires: 385/65 R.22.5 * Remaining tire tread: Front ~40/30%, Middle 50%, Rear 30/50% * Foldable underrun protection * Steel chassis (fine-grained steel) Body: * ALU box tipper * CRAMARO E-roll cover * Remote control * Front cylinder Georg, high pressure 250 bar * Volume: approx. 24 m³ * Roll tarp * Work platform with access on the left Guodpfx Ajzdl U Sel Aed * Rear door, internally mounted, with 2 hook locks * Aluminum floor, with aluminum wear plate 7mm, approx. 3,450 mm Weights: * Gross weight 35,000 kg * Payload 29,800 kg * Tare weight 5,200 kg Other: * German registration * 1 previous owner New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we value customer satisfaction highly, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with organizing special transports. Day license plates / export license plates We will gladly help you with obtaining export license plates/short-term license plates. Handling of customs formalities We will gladly help you with handling customs matters.

Condition: used, axle configuration: 3 axles, first registration: 02/2018, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,840 mm, suspension: air, tire size: 385/55, tire condition: 30 %, color: other, Year of construction: 2018, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Lift Axle - SAF Assen = More information = Make axles: SAF Brakes: disc brakes Godpszd Syzjfx Al Aeud Suspension: air suspension Rear axle 1: Tyre size: 385/55; Lift axle; Tyre profile: 30% Rear axle 2: Tyre size: 385/65 Rear axle 3: Tyre size: 385/65

Condition: used, mileage: 2,12,000 km, power: 112 kW (152.28 HP), fuel type: diesel, gearing type: mechanical, first registration: 06/2010, next inspection (TÜV): 11/2026, emission class: euro5, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), had accident, * Land Rover Freelander XE 4x4 – Passenger car registration – TÜV valid until 11/2026 – Ready to drive – * 2.2 l diesel engine – Displacement: 2,179 cc – 112 kW / 152 hp – Euro 5 – Green emissions sticker – * - ATTENTION - VEHICLE HAS A TRANSMISSION ISSUE - WHEN WARM, 4TH / 5TH GEAR MAY JUMP OUT OCCASIONALLY - CAUSE UNKNOWN - VEHICLE IS DRIVABLE - SOLD AS IS - * VIN: SALFA2DC2AH198017 – German vehicle – German registration certificate – * Towbar with 2,000 kg braked towing capacity – 750 kg unbraked – * Vehicle available immediately – Preferably sold to trade / export / commercial operators Gsdpfx Alexqkzko Aoud * Please schedule an appointment for viewing – * Contact person: Mr. Andreas Vogel * The information provided online is non-binding. * It does not constitute guaranteed properties. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors, and prior sale. Special features: Metallic paint finish Further equipment: Driver and passenger airbags, audio system: radio with CD player, electrically adjustable and heated exterior mirrors, onboard computer, brake assist, electronic brakeforce distribution, driver assistance system: Hill Descent Control (HDC), 5-inch color display, wheel locks, heated rear window, body style: 5-door, driver's knee airbag, head airbag system (windowbag), corner brake control (CBC), luggage compartment cover, lumbar support driver's seat (left), engine 2.2L – 112 kW Td4 CAT, rear park distance control, wheelbase 2,660 mm, tire repair kit, H4 headlights, side airbags, upholstery: fabric, front seat heating, start/stop system, traction control, roll stability control (RSC).

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000023212, functionality: fully functional, power: 13 kW (17.68 HP), input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total length: 5,900 mm, overall weight: 1,870 kg, Equipment: CE marking, Biesse Akron 1440 A – single-sided automatic edgebander (2018) Single-sided automatic edgebander in excellent, near-new condition. Regularly serviced, fully functional and currently in full daily production. Inspection under power / live demonstration possible. Gluing system – dual EVA + PUR: the machine is equipped with both a polyurethane (PUR) glue roller and an EVA glue roller, each with its own glue pot, plus a PUR pre-melter. This allows the full range of edgebanding work, from standard EVA to high-quality, water- and heat-resistant PUR bonding. Feed & pressure: automatic coil edge feeder with separate, automatic feeding; pressure-roller conveyor (steel, rubber and edge-pressing rollers) for a clean, consistent glue line. New touch-screen control panel; rear cleaning brushes replaced; scraper inserts/blades replaced. Gjdpfx Alsy U T Aze Asud Working capacity: panel thickness 8–60 mm · edging material height 14–64 mm · edge thickness 0.4–3 mm (coil) / up to 12 mm (strips) · panel length 100–3200 mm · multi-speed feed 8/12/15/18 m/min. Technical data: power 13 kW · 400 V / 50 Hz / 3-phase · weight approx. 1870 kg · air supply 7 bar · year of construction 2018.

Condition: excellent (used), Year of construction: 2008, Biesse Artech Levia 310 - 1350. YoM: 2008. UK Price £9,000 + VAT Single belt Finishing sanding machine which has been used for pre-sanding and de-nibbing in the paint shop. Now surplus to requirements due to closure of the paint shop. Can also Calibrate and sand solid woods. Single head / belt construction. Connected to services and available for any demonstration. Excellent Condition. Gjdpfeyuy R Dex Al Ajud Working width 1350mm. Thickness between 3mm & 200mm. Combi Working Unit Grooved steel Calibration Roller. AND Electronic Sectioned Pad. Cleaning brush on outfeed. Vacuum table to increase panel holding. Compressed air belt cleaning. Automatic panel thickness setting. Extended infeed rollers.

Condition: used, maximum load weight: 29,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2008, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,329 mm, Year of construction: 2008, Equipment: ABS, 3-axle Schmitz Cargobull SKI 24SL 7.2 ALU box tipper VIN: 1239914 Chassis / Components: * Air suspension / Raise and lower function * Lift axle on axles 1 and 2 * Automatic lowering during tipping * Tires: 385/65 R.22,5 * Tire tread depth: Front ~40/90%, Middle ~40/90%, Rear ~40 * Foldable underrun protection * Steel chassis (fine-grain steel) Body: * ALU box tipper * CRAMARO E-roll cover * Remote control * Front cylinder Georg, high-pressure 250 bar * Volume: approx. 24 m³ * Roll tarp * Work platform with access on the left * Rear gate, internal, with 2 hook locks * Aluminum floor, with 7mm aluminum wear plate, approx. 3,450 mm Weights: * Gross vehicle weight 35,000 kg * Payload 29,700 kg * Unladen weight 5,300 kg Other: * German registration * 1 previous owner New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As we care about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Gedszbfplepfx Al Aeud Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Day license plates / Export license plates We will gladly help you obtain export license plates/short-term license plates. Processing of customs formalities We will gladly help you with customs matters.

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Gjdpfx Aljxncrvo Asud Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: excellent (used), Year of construction: 2001, I sell the Stacking device BIESSE RBO MAGNUM, year 2001. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Automatic loading. Infeed table motorised band-system Infeed tables motorised roller-system on the floor (2 channels) Outfeed table front Band-system Security fence system fully complete ! Total power 25kW Year 2001. Available immediately. Ready for work. Gedpjxyag Uefx Al Ajud

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 50 kg, workpiece height (max.): 900 mm, workpiece length (max.): 2,600 mm, drilling depth: 25 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Workpiece dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: clockwise Electrospindle Gujdpfxow Hqrko Al Aod Power at speed 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Rotation: clockwise EQUIPMENT BSolid Software – 3D CAD-CAM design program (Simulation and management of processes for machining and drilling centers; option to select additional modules for extended functionality according to production needs) Note: Dismantling and loading can be offered by a Biesse service partner for €2,000.

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 3000, with automatic handling. Composed of the following machines: X03001A) Double Loader "RBO" Mod. Winner C 3200 with central motorised roller conveyor X03001B) 1st Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 1 - 7.5 X03001C) Turning station (90°) lengthwise to crosswise "RBO" Mod. GPK 1 Gjdpji Rbg Tjfx Al Asud X03001D) 2nd Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 2 - 11 X03001E) Turning station (90°) crosswise to lengthwise "RBO" Mod. GPK 2 X03001F) Double Stacker "RBO" Mod. Winner S 3200 with central motorised roller conveyor

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN Gsdpetr Envjfx Al Asud W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° Guedpfx Alecggy Sj Ajd - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: excellent (used), Automatic ELECTRONIC Drilling and Dowels inserting LINE, CNC controlled: VZ0250A) LOADING SYSTEM “RBO” Tornado C 1300 with motorized rollers table and conveyoring belts to in-feed the 1st multi-borer VZ0250B) THROUGH-FEED MULTI-BORER “BIESSE” Techno FDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 1.8 each), - No. 4 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 ea) - No. 3 top vertical units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) Guodpfjd Nviqjx Al Aed - No. 3 top pressing devices - No. 2 endless screws to evacuate the wastes. With CNC NC 500 to control, manage and run the 2 machines of this line VZ0250C) THROUGH-FEED MULTI-BORER & DOWELS INSERTER “BIESSE” Techno SDT with CNC - No. 2 through-feed motorised belts, feeding speed up to 75 m/min - No. 2 horizontal units (each with 6 inserting nozzles, such as Glue injectors and dowel drivers) - No. 2 bottom units (each with 2 turnable drilling heads at various spindles, HP 1.8 each) - No. 2 Top pressing devices - No. 2 endless screws to evacuate the wastes. VZ0250D) BRUSHING-CLEANING MACHINE "PIZZIGALLI" Mod. GP 11 VZ0250E) UNLOADING “RBO” Tornado SC/FE 1300 with motorized rollers table and conveyoring belts out-feed from 2nd multi borer (and dowels inserter)

Condition: used, Complete factory for the production of furniture cabinets, composed by: SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels Gujdecr U Uropfx Al Aed SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Guodpfx Aeh T Dvtsl Asd Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Gsdpfx Asu Tg Uqjl Aeud Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Gusdpshvahhofx Al Aed Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,65 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Milling grooving Unit 2 x FB 30 (Kw 5 x 2) 0 - 90° Profile Scraping unit (Multi-profile, by N.C.) RBK - 503 (2 POSITIONS) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), LINE (half line) of Double-side Sizing-Milling & Edge Banding, with automatic handling system. Composed of the following machines: A) LOADER (Portal) with double station "RBO" Mod. Advantage C 3200 and central motorized rollers table. B) Infeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-1 C) Double-side SIZING and EDGE BANDING machine "BIESSE" Mod. Stream SB2 11.0 D) UPSIDE DOWN 180° TURNING MACHINE "RBO" Mod. Ribaltatore E) Outfeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-2 F) STACKER (Portal) with double station "RBO" Mod. Advantage SC 3200, with central motorized rollers table. Godpfohvah Njx Al Asud

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings Gjdpfoukhd Aox Al Aoud 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES" Godpjyhqa Aefx Al Aeud

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) Guodsu Rc Anopfx Al Ajd EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Gedpfx Alju Rc Hye Aoud No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: excellent (used), Through-feed Drilling ELECTRONIC LINE (3 machines), CNC controlled, J06031) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 ea) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top pressing devices + No. 2 endless screws to evacuate the wastes. J06032) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 2 horizontal units (each with 2 drilling heads at 11 spindles each, HP 2.3 each) - No. 6 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 top vertical units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 6 Top pressing devices + No. 2 endless screws to evacuate the wastes. J06033) THROUGH-FEED MULTI-BORER “BIESSE” KERNEL CN - No. 4 bottom units (each with 2 turnable drilling heads at various spindles, HP 2.3 each) - No. 4 Top pressing devices + No. 2 endless screws to evacuate the wastes. With CNC (software Tooling System + Woodmaster) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads Gsdpfx Aeg Urn Eol Aoud The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts