Used Carer A 120X for sale (67,643)

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,400 h, MOBILE PLANT FOR LIQUID SCREED SCREED PUMP TYPE TRANSMIX BRINKMANN SEMI-TRAILER OR CARRIER AS NEW RECONDITIONED Codsuafvtepfx Abxorf

Condition: used, This listing is for a Raymond A Lamb E18.12 Mini Hotplate Crodpfxexzgxms Abxjf

Condition: used, This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide Credpfx Aoxzhg Sobxof

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Csdjxzhtrjpfx Abxerf Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath

Condition: used, This listing is for a Raymond A Lamb E22 Slide Microwriter Cjdpfsxzhgrsx Abxorf

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 2.102.061, functionality: fully functional, pressing force: 135 t, stroke length: 210 mm, throat depth: 410 mm, controller model: Cybelec CybTouch 8W, working width: 3,100 mm, TECHNICAL DETAILS Press force: 135 t Max. working width: 3,100 mm Frame spacing: 2,500 mm Crodpfx Aozrmu Njbxef Overhang: 410 mm Rear gauge depth: 750 mm Max. stroke: 210 mm Number of axes: 4 (Y1, Y2, X, R) MACHINE DETAILS Control system: Cybelec CybTouch 8W Power: 11 kW Tool holder type: European-style Punch holder: Standard Dimensions & Weight Dimensions (L x W x H): 3,720 × 2,300 × 2,750 mm Shipping weight: 7,700 kg Shipping packages: 1 EQUIPMENT Tools CE marking Documentation

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Crodezmtlkjpfx Abxsf Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: new, Year of construction: 2026, total width: 780 mm, total length: 1,240 mm, total height: 1,330 mm, overall weight: 480 kg, power: 5.5 kW (7.48 HP), cutting diameter: 120 mm, The CBR A Cable Stripping Machine is specially designed to strip the outer insulation material from cables of all sizes, making it easy to remove the conductive material inside. This series offers superior performance on; steel-armored cables (SWA), double steel-armored cables, steel tapes, PVC-coated cables, lead-coated cables, thick rubber-coated cables, nylon-coated cables, low-grade cables, TT cables, and more. Specially processed blades with unique designs allow cables of any length to be cut and stripped for a long time without dulling the blades. All electrical and electronic components in the CBR A Series are Siemens brand. Our products are manufactured and certified in accordance with CE and EAC standards. Credpfxjff H Imj Abxjf Technical Specification POWER 5.5 KW CABLE DIMENSIONS 1-120 mm CUTTING SPEED 25 meter/min LENGTH 1240 mm WIDTH 780 mm HEIGHT 1330 mm WEIGHT 480 kg

Year of construction: 2006, operating hours: 120 h, condition: good (used), functionality: fully functional, Butter melter with transfer pump (brand Technica Pompe) Codezdgadepfx Abxorf

Condition: new, Year of construction: 2026, total width: 1,200 mm, total length: 2,500 mm, total height: 2,080 mm, overall weight: 3,700 kg, The Multi Destroyer is a machine specially designed for crushing PCB (Printed Circuit Board). The double-shaft shredder located at the top effectively breaks down PCB and feeds them into the granulator below. The granulator converts the shredded material into fine granules, making it easier to recycle and reuse. The double-shaft shredder uses special blades made of wear-resistant steel, offering maximum durability and performance. The feed rate of the material can be easily adjusted via a user-friendly control panel. The granulator is optimized for high efficiency, ensuring the final product is of the desired size. The Multi Destroyer uses a jet filter to minimize dust formation, ensuring a cleaner and safer working environment. This feature is especially important in sensitive recycling processes. The Multi Destroyer is an ideal solution for PCB recycling, meeting industry demands with its high performance. Its superior engineering design ensures the machine is long-lasting and durable. Cedofm E E Ajpfx Abxerf

Condition: used, • Silikant – 3000 Cjdpfxszrvxdo Abxjrf • Item No.: 8683 • Year of manufacture: 2007 • Belt size: 100 x 3000 mm • Abrasive belts and polishing belts can be purchased separately.

Condition: ready for operation (used), Year of construction: 2008, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 800 mm Y-AXIS TRAVEL: 530 mm Z-AXIS TRAVEL: 530 mm DISTANCE SPINDLE NOSE-TABLE: 70-600 mm Rapid feedrate X - Y - Z: 48 m/min SPINDLE: 120 - 12000 rpm; 5,5-7,5 kW; ISO 40 TABLE SIZE: 900 x 520 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: BASKET-TYPE ; 25 POS MAX TOOL DIAMETER: 63,5 (80) mm MAX TOOL LENGHT: 250 mm MAX TOOL WEIGHT: 4 Kg CONTROL UNIT: FANUC 0i-MC WEIGHT: 5500 Kg Cjdpfjy R E T Rjx Abxsrf OVERALL DIMENSIONS: 3250 x 1900 x 2700 mm ACCESSORIES: SWARF CONVEYOR ; HIGH PRESSURE COOLANT ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel engine) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled total control Hydraulic oil tank capacity: approx. 270 liters Diesel tank capacity: approx. 228 liters Standard bucket volume: approx. 0.60 – 1.00 m³ 5826 Cjdpjzrzymofx Abxjrf

Condition: used, Second-hand Martin T72 A panel saw for professional cutting work in woodworking. The machine is suitable for typical panel cutting and sawing tasks when working with wood-based materials. Technical data: - Cutting height: ~ 145 mm Credpfozrywwjx Abxsf - Cutting width: ~ 1,300 mm - Cutting length: 3,300 mm - Tilt angle: 45° - Stop: Digital - Adjustment: Electronic - Rip fence: Manual

Condition: used, Technical data: - Condition: As new Cjdozrxw Nspfx Abxorf

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137 Cedpfx Aszrxnbjbxjrf

Condition: used, Technical details: Tool holder shaft type: HSK-A 100 Tool holder shaft type: Wohlhaupter Tool holder shaft type: Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Csdpfeyug Ebjx Abxjrf Sales list with prices upon request. *

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 660 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,500 mm, power: 74 kW (100.61 HP), fork length: 1,200 mm, empty load weight: 11,300 kg, total length: 6,270 mm, drive type: Diesel, construction width: 2,420 mm, Telescopic handler rigid Load centre: 500 Mast type: telescopic Transmission: torque converter Speed category: 20 Condition: as new Codpjxlvfkefx Abxorf Technical condition: very good Front tyres type: pneumatic Front tyres size: 24 Front tyres condition: 80 - 100% Rear tyres type: pneumatic Rear tyres size: 24 Rear tyres condition: 80 - 100% Description: Incl. basket control – radio control 3rd valve, rear work lights, front work lights, heater, full cab, air conditioning.

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Credpfxezr T Dds Abxjf Quantity: 8 available Analog switching device BES516-611-A-1 (BAE006Y) 0.62100125 00076 BALLUFF

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Crjdey A N U Aopfx Abxjf Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Year of construction: 2011, condition: good (used), warehouse no.: 503260 type / device: dehumidifying dryer manufacturer: Amboss+Langbein type: Sektionaltrockner H150 year of construction: 2011 The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the drying system adapts individually to operational requirements and can be implemented in the smallest of spaces. Also available with material station and vacuum system if required. The dryers work with dew point control and energy-saving heat exchangers. Depending on the production requirements, the air throughput is regulated between 140 and 400 m³/h by process control. Each drying boiler has an individual temperature control. A separate scanning of the material to be dried prevents over-drying and insufficient drying Drying due to excessive material removal. Cedsx Eifkspfx Abxjrf Properties: Fully insulated drying container made of V2A stainless steel Sectional multi-boiler system Each dryer boiler individual temperature control Continuous drying Automatic air volume measurement Patented throughput recording and adapted drying Protection against overload and overdrying Dew point controlled (-60 °C tested) Process air control Batch drying Energy-saving heat exchanger Extreme drying of compressed air for electronic component manufacturing

Condition: ready for operation (used), Siemens SIMODRIVE 6SN1124-1AA00-0LA2 LT module SN: T-U72045027 Version: A, used, in good condition, fully functional, scope of delivery as shown in the photos Crodpfox Dxmuox Abxef

Condition: like new (used), Year of construction: 2021, Cell with 2 KAWASAKI YF003N robots. A Number of axes: 4 Payload: 3 kg Crsdpfx Aoyywppebxof Year of manufacture: 2021 2 vision systems Cells/robots designed for hygienic and food industry applications 2 cells available, one cell has 2 robots – price is for one cell with two robots!

Condition: like new (used), Year of construction: 2021, Cell with 1 robot KAWASAKI YF003N A Number of axes: 4 Crodpfxjyywn So Abxef Payload: 3 kg Year of manufacture: 2021 Robotic cells/robots designed for hygienic and food industry applications Quantity available: 2 – price per unit!

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Type: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel ranges: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw: 36 mm diameter Feed drives FANUC AC X/Y-axis model 5, Z-axis model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 sec. Repeatability: + / - 1 sec. Pallet clamping force: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec. Collet clamping time: 7 sec. Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: Work end display with alarm light Codpfx Abjt Rg E Sexjrf Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm 3826