Used Distributor Manifolds for sale (396)

Condition: good (used), WEINIG UNIMAT 23EL 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 11 KW 3: LEFT 7,5 KW Iedpfsyahubsx Af Toib 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 11 KW 8: BOTTOM 11 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE 8000 RPM SPINDLES. FEED MOTOR 7.5 KW MAX FEED SPEED 44M/MIN 13 x DRIVEN TOP FEED ROLLERS 6 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5000 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER EXTRACTION MANIFOLD INCLUDED FULL DOCUMENTATION INCLUDED

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Iijdpjyxa Dtjfx Af Tob Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel

Condition: good (used), Year of construction: 1992, Travel X-axis: 1500 mm Travel Y-axis: 420 mm travel Z-axis: 400 mm Ijdecph Tmspfx Af Tjib clamping surface: 2 x 700 mm x 420 mm max. table load: 800 kg number of tools: 0 2 x 36 pieces tool holder: SK 40 gr. feed: 25 m/min weight: 9 t area required: 6,50x4,5x3,1 m small speed: 50 rpm big speed: 7500 rpm stepless rapid traverse: 25000 mm/min control: Siemens Sinumerik 820 M GA 3 + 2 x single axis stepper motor control Sama SFI present clamping system: per place 1 NC dividing head with counter bearing, carrier plate, rotary distributor and hydr. clamping and 4-fold dividing head with rotary distributor in special design and sep. NC control Clamping system: 4-fold dividing head consists of 4 -2 jaw chucks, clamping pressure 12bar Make: Hofmann HMR 4/kombi 294/4 Tool breakage control Meutrsuix ATM B310 Renishaw probe system (without probe) Coolant system with sparger, filter system and fine filter

Condition: used, SIEMENS SIMOTION Drive-based Control Unit D410-2 DP/PN Manufacturer part number: 1P 6AU1410-2AD00-0AA0 Parcel shipping (optional) Weight: 0.9 kg Country of origin: Germany The item is available for immediate delivery. This control unit is part of the Siemens SIMOTION system, which offers integrated solutions for motion control and drive technology in industrial environments. The system enables precise control of motors, motion axes, and drives. Iisdpeylz E Rofx Af Tob For detailed information on this specific product, including installation instructions, configuration details, and application notes, I strongly recommend consulting the technical documentation and manuals provided by Siemens. These documents are usually included with the product purchase or can be downloaded from the official Siemens website. If you have specific questions about this product or require assistance with installation and configuration, you can also contact Siemens directly or reach out to an authorized Siemens distributor. There, you will receive professional support and accurate information tailored to your specific product.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally available with F705, F805, F905 incl. L436 Fly-Jib and V20 winch!!! TipMatic – Automatic Transmission 8x2 Three steered axles STEERED / LIFT axle Front support approx. 14,000 KG Platform body with drop sides 6200x2550x600 mm Access steps Checker plate flooring Removable drop sides 9 x LED lighting units Extendable overwidth markings to 3,500 mm Start/Stop Amber beacons 8 x stake pockets 6 x lashing rings 6500 daN Toolboxes Towing hitch (AHK) Storage compartments Utility boxes 20-foot container locks Perforated side profile with lashing rings 2500 daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, wire winch, cross-format radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory package for winch operation, folding pulley, quick coupling between main boom and fly jib, and much more... TECHNO SERIES!! NEW CRANE model Infinite slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Dual knuckle lever system with PROLINK (overbending jib up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical warning (90% and 100%) Pressure limiting and load-holding valves XF-System (Extra Fast) + XP-System (Extra Power) + FL-System (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on display Danfoss D900 control block with 4 control valves mounted to crane pillar Emergency manual control for crane functions High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted to crane base Hydraulic support legs, hydraulically extendable on both sides, support width 10.00m, support can be operated via remote control Standard color RAL 3020 traffic red – all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Load hook and mounting bridles (short/500mm) Travel position: folded transversely to driving direction Note: Observe on-board voltage / 12V or 24V, standard is 24V FASSI stability control FSC-TECHNO Fassi V7S remote maxi – 8 linear levers Proportional control block for support legs 180° hydraulically tiltable outriggers – both sides Preparation for operation with variable displacement pump (LS) Control system for 2 additional functions with 2 hose guides / hxp-techno Auxiliary jib (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Iisdpfx Ajyw Dk Ief Tob Multi-coupling with cable duct for jib, fitted for 2 functions Control system for auxiliary function (winch) Winch type V20 – 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently installed rope guide rollers for operation with auxiliary jib AWC – (Automatic Winch Control) for crane – automatic winch management AWC – (Automatic Winch Control) for JIB – automatic winch management Work lights operable via display or remote 1 LED work light fitted to knuckle boom 1 LED work light fitted to jib LED for 2 outrigger legs, not fitted (crane) LED for 2 outrigger legs, not fitted (auxiliary support beam) Electrical rotary manifold with 14 slip rings 1 zinc primer from 720RA to F820RA Zinc primer for JIB “L42” Additional cost for Dinitrol application (cavity protection) Additional cost for stainless steel

Condition: excellent (used), Machine package 30 pcs 110V + A voltage converter (110V to 230V), a robust extension cable, and a 4-way socket distributor are included in the price. 1.Hilti TE35 2. Hilti TE 40 AVR 3.Hilti DEG 4. Hilti WSR 1400-PE 5. Hilti DC 230 6. Hilti SD 2500 7. Hilti ST 1800 8. Hilti SD 2500 9. Hilti SD 2500 10 Hilti SI 100 11.Kress HMX 24 600W 12.Kress HMX 24 600W 13.Kress HMX 24 600W 14. Hilti TE 6S 15. Hilti DEG 16. Hilti TE2 17. Hilti WSJ 850-ET 18. Hilti WSJ 850-ET 19. Hilti SR 16 20. Hilti SR 16 21.Hilti SR 16 22.Hilti SR 16 23.Hilti SR 16 24. Hilti UD 30 650W 25. Hilti UD 30 650W Iodpfx Aevzcrmof Tsib 26. Hilti UD 30 650W 27. Hilti TE2 650W 28. Hilti TE2 600W 29. Hilti DEG 30. Hilti ST 1800 600W

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. Iodpfx Afotqu Dis Teib TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: used, Year of construction: 2006, machine/vehicle number: TP106, Used Capping Machine AROL T stopper year 2006 Machine Description of the Capper AROL KAMMA PKV The machine is specifically designed for efficient and reliable bottling with T-stoppers in industrial settings. With its five heads, the machine precisely manages each step of the process. Consequently, it maintains closure quality consistently while operating at high production speeds. Cap Gripping System To ensure effective stability during cap positioning, the machine’s vacuum-based gripping system secures each cap, which significantly reduces the risk of errors or misalignment. Moreover, an integrated vacuum pump powers this mechanism, ensuring a firm and consistent grip on each cap throughout the process. Adjustable Capping Head One key advantage of the AROL capping machine is its adjustable-height capping head, which easily adapts to various bottle sizes. As a result, this versatility makes the machine suitable for different production formats. Therefore, it increases both efficiency and operational flexibility. Cap Distribution System An alveolar centrifugal distributor manages cap distribution, ensuring uniform and consistent delivery. Furthermore, this component minimizes the risk of jamming. Thus, it keeps the workflow continuous, which is essential for maintaining high and uninterrupted production. Safety and Materials The Used Capping Machine AROL T stopper year 2006 includes safety guards, which effectively protect operators throughout operation. Additionally, the machine’s stainless steel exterior provides strength and corrosion resistance, which are both critical for use in the food and beverage industries. Production Speed and Inverter Control Thanks to its inverter control, operators can easily adjust the machine’s speed, allowing it to meet specific production demands. Consequently, the AROL capping machine can reach a production capacity of approximately 7,000 bottles per hour. Thus, it offers an ideal combination of efficiency and flexibility to satisfy market needs. Bottle Flow Configuration With its left-to-right bottle feed (clockwise flow), the machine optimizes the production line layout. This setup, therefore, integrates smoothly into existing systems, reducing installation time. In turn, it supports continuous production and maximizes operational efficiency. Production Year of the Capper AROL KAMMA PKV Ijdpfoyhbymjx Af Tsib Manufactured in 2006, the Used Capping Machine AROL T stopper combines reliability with proven technology. Even though it was produced years ago, the machine still upholds high-quality standards. Hence, it offers companies a reliable and versatile capping solution.

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc. Iiodpfx Afow Ev Two Tob

Condition: ready for operation (used), Year of construction: 2012, Size supply air: Top 21, supply air volume: 1840m³/h, length: 3764mm, width: 712mm, height: 508mm, weight: 333kg. Equipment: pocket filter F7 (short pockets) with differential pressure switch, high air purification efficiency, heater section (long), high-performance heat exchanger for reliable heating, cooling section, prepared for external cooling supply including droplet separator, fan (standard version), energy-efficient and low-noise, empty section with flow distributor, for optimal airflow guidance, silencer type 12, effective noise reduction. Accessories: canvas connection, equipotential bonding, differential pressure switch. System is fully functional, condition very good. An on-site inspection is possible. Iedpfx Asyu T A Tef Tsib

Condition: used, operating hours: 5,485 h, mileage: 82,555 km, power: 118 kW (160.44 HP), first registration: 05/2015, overall weight: 11,400 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 5,500 kg, empty load weight: 5,900 kg, brakes: other, driver cabin: other, gearing type: other, emission class: euro5, loading space volume: 5 m³, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, * German machine * Condition see photos * only 5.485 operating hours * 3 disc brushes * Maximum speed 62 km/h * thereby Aurtobahn approval * movable brush system * therefore up to 3.40 m working width * Pre-spraying device * Joystick operation * 5m³ stainless steel hopper * 850 mm emptying height * Camera monitoring for suction mouth and vehicle side * Rear view camera * Air-filled comfort seat * Air conditioning * Operating hours 10,326 * LED work lights Iedpfx Afevhqlnj Toib * EasyDrive (hydrostatic drive) (SN) * Iveco 4-cylinder diesel engine * 118 KS/ 160 HP * 3,920 ccm * Rotating beacons * Stereo CD * Diameter intake manifold 225 mm * Diameter disc brush 750 - 900 mm * 600 l. Water tank * 120 liter diesel tank * max. gross vehicle weight 11,400 kg. * Unladen weight 5,900 kg. * Payload 5,500 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. Ijdpfx Afeyt Ikvo Tjib EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Iodpfx Aeyl Rlyef Tsib Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: used, mileage: 3,80,500 km, power: 205 kW (278.72 HP), first registration: 09/2005, fuel type: diesel, empty load weight: 10,360 kg, maximum load weight: 8,000 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 2, total length: 2,550 mm, total width: 3,600 mm, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 600 mm, front tire size: 385/65R22.5, rear tire size: 315/80R22.5, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, steel body, permit as house, 2x comfort seats, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, cruise control, auxiliary heater, 8-speed manual gearbox, ABS (anti-lock braking system), constant throttle, power take-off, raised exhaust, differential lock, high beam headlights, work lights, rotating beacon, storage box, leaf suspension, trailer coupling air + electric, low-noise G1, winter service equipment, foldable underrun protection, swinging tailgates, roof hatch, crane behind cabin, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, 3x hydraulic extensions, yellow environmental badge. Wheelbase: 3900 mm. Body: Meiller 3-way tipper body with Atlas AK 65.2-A3 L crane, radio control, mounting plate at the front, spreader chains, 9t front axle, rear axle H7 13t crown wheel 300, ABS, drum brakes front and rear, rear axle stabilizer, steel bumper, PSM (body and trailer CAN, ISO 11992), distributor cockpit, pre-installed for toll collection, 2000W auxiliary air heater, pollen filter, tank capacity: 210l, Meiller 6-piston pump type 265, main truck package, side PTO MB 2c, front engine output with tandem pump, operating hours approx.: 15,630! Iedpjyudbaefx Af Tjib Load chart: 1.84m - 3,000kg; 3.79m - 1,500kg; 5.49m - 1,000kg; 7.19m - 730kg; 8.89m - 550kg! The vehicle is operational but in need of repair! Engine clutch replaced. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted.

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve Isdpsx Ig Siofx Af Toib - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional manual swivel head available at extra cost – see pictures.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 800 mm, total width: 900 mm, total height: 1,600 mm, filling weight (max.): 1,00,000 g, TECHNICAL DETAILS Workpieces: Press-in studs M6 x 15 Feeding capacity: 15/min (single track) Max. fill weight: 100 kg Max. fill volume: 25 dm³ MACHINE DETAILS Voltage: 230 V Iisdpfx Afsyf A U Hs Tsb Max. power consumption: 100 VA Dimensions (L x W x H): 800 x 900 x 900 mm EQUIPMENT Linear feeder rail Transport hose Air blow nozzle Note: The workpieces, max. 100 kg or 25 dm³, are stored in the parts feeder and correctly oriented. At the end of the sorting process, the workpieces are buffered on a linear feeder rail and supplied to the singulation unit. Behind the singulation unit, a suitable transport hose and an air blow nozzle are installed. Each workpiece is transported individually through the transport hose. Possible electric interfaces include HAN connectors, bus modules and valve manifolds.

Condition: used, mileage: 1,19,517 km, power: 382 kW (519.37 HP), first registration: 10/2023, fuel type: diesel, brakes: retarder, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, 12.4 liter inline six-cylinder D2676 Common Rail High-lift exhaust tailpipe with manifold right behind cab MAN PriTarder High-performance engine brake, adjustable Hydraulic system. Tipping saddle, Meiller 2-line system High pressure 275/LP 150 bar, operated in cab Fifth wheel coupling JOST JSK 42 K0 2 inch 153l tank capacity hydraulic oil left Iisdpjv Rt U Rofx Af Tob

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 40 t, table width: 1,000 mm, table length: 600 mm, Hidrobrasil Double Column Press – 40 t – 1,000 × 600 mm – Stroke 500 mm For sale is a hydraulic double column press (H-frame) manufactured by Hidrobrasil, featuring an adjustable pressing force from 6 to 40 t. This machine is designed for calibration, assembly, and small series applications, and stands out thanks to its compact design, robust guidance system, and precise control. Ideal for flexible production processes with changing requirements. ==== Technical data & information: Hydraulic Double Column Press – 40 t ==== General information - Manufacturer: Hidrobrasil - Model: Double Column Press - Design: H-frame / Double Column Press - Designation: Small Batch Press / Calibration Press - Pressing force: 6–40 t (adjustable) - Machine weight: approx. 3,500 kg - Dimensions (L × W × H): approx. 2,100 × 1,600 × 3,500 mm ==== Working area - Max. installation height: 700 mm - Stroke: 0–500 mm (adjustable) - Table height above floor: 800 mm ==== Table & Slide - Table size: 1,000 × 600 mm - Slide area: 1,000 × 600 mm - Guide columns: Ø 100 mm (4 units) - T-slots and holes: as per customer specification ==== Speeds - Rapid traverse speed: 80 mm/s - Pressing speed: 9 mm/s - Return speed: 90 mm/s ==== Hydraulics & drive - Hydraulic pump: ASC, 67 + 8 l/min - Motor power: 4 kW - Total connected load: approx. 6 kW - Operating pressure: max. 260 bar - Pressure accuracy: ± 5 bar - Hydraulic manifold and valves: Duplomatic - Air and oil filters: Filtrec - Electronic oil level switch - Air cooling for hydraulic system - Pressure adjustment via pressure switch - Hydraulic unit mounted at top rear ==== Control & Safety - Control via sensors - Safety light sensors - Safety cover (door) at rear - Work area interior lighting - Pressure display via manometer ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Components: Siemens, Allen Bradley, SICK Iijdpfx Aoxrby Hof Tob ==== Electrical cabinet - Protection class: IP54 - Spare capacity: approx. 30% - Cooling: air cooling - Interior lighting: fitted - Operating mode selector: lockable ===== Calibration, assembly work, small batch production, forming technology, flexible production Hydraulic press, double column press, H-frame press, calibration press, assembly press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in special-purpose machine engineering and press automation. We supply customised hydraulic presses at surprisingly competitive prices. All presses are equipped with hydraulic components primarily from leading European manufacturers.

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation Isdpfxjywucze Af Tsib  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: new, Year of construction: 2016, operating hours: 9 h, functionality: fully functional, BMCtouch Integrated Automation System The control system, constructed in modular design, includes the following components: - PLC in industrial-standard design for machine control - Industrial PC for visualization and data management - Swivel-type operating and display panel with 19" TFT touch screen Performance Features: - User interface and functionality as per previous BMCtouch systems - Temperature control with self-tuning function - Pre-heating and start-up program - Prepared for data transfer to haul-offs with BMCsmart control systems - Operation of haul-off and saw from extruder terminal - CANopen Interface DS420 V2.0 - Flexible process display with individually configurable summary pages and customizable background - Configurable alarm management and alarm history - Trend data acquisition and presentation - Order management/administration - Configurable access authorization - Online assistance - Suitable for independent multi-user operation - Additional memory for history trends - Network capability - Modem Integration of Central Air Supply Co-extruder, BCE 1-30-25D - Stand-alone machine - Synchronization with main extruder via CANopen, DSP 420 V2.0 - AC drive incl. gearbox - Nitrided screws - BMCeco operator terminal - Product of battenfeld-cincinnati China branch Extruder, solEX 75-40 i Designed for pipe extrusion Technical Data: - Screw diameter: 75 mm - Effective screw length: 40xD - Drive power: 300 kW - Barrel heating zones: 5 pcs. - Barrel cooling zones: 5 pcs. - Total installed power, max.: 347.37 kVA Die heating zone incl. thermocouple (6 kW, 230 V) (BMCtouch control) Extrusion Die, helix 500 VSI-TZ Designed for the extrusion of PO pipes - Two-step distributor consisting of smoothing thread and compact lattice basket - Base die and die set made of tempered steel - Material flow surfaces are polished - Pipe O.D.: 90 - 500 mm - Number of heating zones: 17 Co-extrusion ring for 4 color stripes Calibrating sleeve, type 6 For PO pipes vacStream 500-6 No. 1 Designed for calibrating and cooling of pipes - Closed stainless steel tank with welded feet - Tank on rollers with height and lateral adjustment - Rust-proof hinged lids - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Mechanical vacuum control - Temperature display Technical Data: - Pipe diameter range: 90 - 500 mm - Number of solid taper nozzles: 162 pcs. - Number of spray rods: 6 pcs. - Max. vacuum: 0.7 bar - Length of vacuum chamber: 5500 mm - Total length: 5900 mm vacStream 500-6 No. 2 Designed for calibrating and cooling of pipes coolStream 500-6 4 For pipe cooling - Closed stainless steel tank - Base frame with height-adjustable feet - Rust-proof, hinged lid - Central water inlet and outlet - Pipework made from rust-proof materials - Manual reversible flow filter unit with bypass - Temperature display - Spray rods made of PVC - Solid taper nozzles with bayonet lock - Visual monitoring of pumps - Drip trays at inlet and outlet - Water circulation pump pullStream R_ 500-6 E Designed for pipe haul-off Iisdpfx Afex Sbc Rj Teb cutStream RTAplus 500 For chipless cutting of PO pipes

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers Iiedpfxjx Aidbo Af Tjb • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel o textile fibers • Optional low-noise and low-dust engineering packages available The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: used, mileage: 2,37,492 km, power: 300 kW (407.89 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 14,450 kg, maximum load weight: 11,550 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 07/2025, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. Mercedes PowerShift II transmission, cab type 'Haus', 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, automatic transmission, differential lock, fog lights, work lights, rotating beacon, storage box, leaf-air suspension, trailer coupling with air and light connections, low-noise G1, last axle hydraulically steered, underride guard, side aluminum underride protection, roof hatch, crane behind cab, emergency stop, grab control, foldable, elevated operating platform, 2-point hydraulic support, radio remote control, 3x hydraulic extensions, green environmental sticker. Wheelbase: 4800 mm. Body: 20t roll-off system Meiller RK 20.65 for containers up to 6.5m & Palfinger crane PK 14002-EH B with elevated platform and remote control. Roller height approx. 1300 mm. 8t front axle, H6 13t rear axle, crown wheel 440, Telligent tag axle hydraulically steered, Telligent brake system with ABS and ASR, disc brakes on front and rear axles, steel bumper, front underrun protection, Telligent roll stability control, additional stabilizer rear/tag axle, starting aid, PSM, pre-installation for toll recording, distributor cockpit, Mercedes PowerShift 2, pollen filter, on-board diagnostics 2, gearbox oil cooling, rear engine PTO for hydraulic pump. Iijdpfevhnwuox Af Tjb VIN: WDB9302041L743058 Load diagram: 4m - 3100kg, 6m - 2000kg, 8m - 1460kg, 10.2m - 1140kg. Crane hours: 972h. Grapple available at additional cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 19,403 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Solution Line, spindle speed (max.): 17,500 rpm, coolant supply: 70 bar, spindle nose: HSK63, number of spindles: 2, number of slots in tool magazine: 144, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 work spindles 1-17,500 rpm, torque motor drive system, equipment includes: Oil distributor for rotary table, pneumatic pressure booster, total magazine extension 144 tool positions (2 x 72), basic hydraulic clamping module, 70 bar high-pressure pump, emulsion mist separation system, automatic loading door, air monitoring, inductive tool breakage monitoring, KNOLL 800 K-1/400 scraper belt conveyor, KNOLL FKA 1200 compact belt filter for cleaning cooling lubricant and much more. Isdpfx Afswgh Hlo Tsib

Condition: used, Year of construction: 2016, Overview  This cap feeding system consists of a vertical cap elevator, a centrifugal distributor, and a horizontal flat top air conveyor. The system was used for feeding 38 mm flat plastic caps in PET bottling applications. It has been dismantled, stored in a warehouse, and is immediately available. Technical data  Formats: Flat 38 mm plastic caps Dimensions: L 210 cm × W 75 cm × H 300 cm Power supply: 0.2 kW Application: PET bottles Scope of Delivery Vertical cap elevator | Marmoinox | AML-ZVE1 | 2016 Centrifugal distributor | Sacmi | - | 1997 Horizontal flat top air conveyor, 2 m | Sacmi | - | 1997 Iijdpfx Aew T S Raef Teb

Condition: used, Year of construction: 2016, Overview  This Braucraft Mexicana brewing system has three tanks with a capacity of 3,000 liters: mash tank, lauter tank and kettle/whirlpool tank. The system was designed for continuous operation and enables double brewing per day. It is currently stored professionally and can be viewed by appointment. Operation is via steam. Technical details  Wort capacity: 3,000 liters Tanks: Mash Lauter Boiler/whirlpool Additional tanks: HLT (Hot Liquor Tank): 6,000 liters usable capacity, steam-heated CLT (Cold Liquor Tank): 6,000 liters, laser-welded cooling jacket Pumps: 5 transfer pumps for HLT, CLT and brewing system operations Heat exchange: 1-stage plate heat exchanger (Thermowave) Control: Analog control panel with Frequency converter for brewing system pump Frequency inverter for HVAC and CLT pumps Temperature measurement and control for HLT, boiler/whirlpool, mash and lauter Scope of delivery Platform Grain silo and grain hydrator 3 hp geared motors with built-in agitators and plows Mixing manifold and 1.5” jacket-insulated sanitary pipes with valves Iedpfx Asvt Srgof Tjib