Used End Burr Machine for sale (67,249)

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment Hedpfx Aew U U Udekronu - Digital position display for motor-driven adjustable side roller

Condition: new, sheet width 700 mm plate thickness 4,0 mm distance between columns 720 mm diameter of upper rolls 95 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 0,95 x 0,76 x 1,25 mm Hsdpfx Aewfyqyskrsnu

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: Hnedpfez Dxpmjx Akreu •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: new, 35 (600) mm 35 (900) mm L-beam 50 x 50 x 5 (800) mm T - beam - web outwards 60 x 7 (600) mm Axis diameter 50 mm Hsdpefv H Etsfx Akrjnu work speed 4,5 m/min total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: excellent (used), Year of construction: 1998, control type: CNC control, controller model: SIEMENS TOUCH, number of rollers: 3, overall weight: 15,000 kg, total length: 2,600 mm, total width: 2,200 mm, total height: 2,300 mm, Profile bending machine FACCIN - RCMI 180 MACH-ID 9828 Make: FACCIN Type: RCMI 180 Control: SIEMENS TOUCH YOP: 1998 Power 30 kw Hydraulic side supports 3 roll driven  Touchscreen SIEMENS Panel with S7 SPS  Hedpfx Aoz Iwy Sskrjnu Laser measuring device for Radius  Set Universal rolls hardned Set Tool points  Horizontal and vertical:Horizontal Shaft Ø: 190mm Number of rolls: 3 Stroke X-Axis: 500mm Resistance moment: 360CM³ Working speed: 2000 - 5000mm/min. Length: 2600mm Width: 2200mm Height: 2300mm Weight: 15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. ca. 190 mm roll diam. toproll 140 mm bending speed 3.0 m/min engine output 2.2 kW weight 1420 kg range L-W-H 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor Hodjzkbn Ijpfx Akrsnu - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller

Condition: new, sheet width 1070 mm plate thickness 2,0 mm Hsdpjfv A Epefx Akrjnu distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement Handbetrieben weight of the machine ca. 0,22 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate

Condition: ready for operation (used), Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction Hnodpfx Aksxacdvorou - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: as good as new (ex-display), Year of construction: 2026, tube diameter 10.0 - 60.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 64.0 mm CU/Alu wall strength 4.0 mm revolutions per minute 1.25 - 2.50 U/min bar material - diameter 35.0 mm voltage 400 Volt Control ISITAN NC total power requirement 2.0 kW weight 140 kg range L-W-H 380 x 900 x 600 mm Hjdsxabu Hspfx Akronu Exhibition machine - like new never been used (!!) Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2" Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8" Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing Hedpfx Aksxaawgjrsnu - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: new, Type: Motorized Working length: 1.050 mm Roller diameter: 110 mm Hsdpfx Akoug Un Eersnu Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2,2KW Minimum bending diameter: 150mm Upper and lower roller driven by a single gear system. Rollers with SAE 1050 quality certificate of high tensile strength. Conical bending system Induction treated and hardened rollers Wire grooves at the end of the rollers.

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm Hnedpfx Akexacbusreu plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers Hedpfx Aksxaafdsronu - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200713, total width: 950 mm, total length: 1,050 mm, total height: 890 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 585 kg, oil tank capacity: 13 l, rotational speed (max.): 6 rpm, Electric bending machine P54 Evo Bending machine for concrete reinforcing rebar, studied for high volumes of production. Bending capacity: - 1 rod Ø44 mm (1.73 in) / res. 65 kg/mm² - 1 rod Ø40 mm (1.57 in) / res. 85 kg/mm² Engine 4 kW (5,5 CP), power 400 V (three-phase) Hsdjzgv Hdopfx Akronu Dimensions: cm 105 x 95 x h. 89 Net weight: kg. 585 Operation electric Product handled: concrete reinforcement Displacement: horizontal Bending capacity: Min.: 2 mm; Max.: 44 mm RPM 6Two reversal pins, to be positioned on the circumference of the plate to determine the angle of bending; A set of Allen keys, for ordinary maintenance; An electrical pedal, to facilitate the work to the operator permitting him to keep his hands free and work from all sides of the machine; A set of wheels, for the machine handling; An industrial plug, that guarantees the electrical connection; Two mushroom button switches, to immediately stop the machine in case of emergency. They are positioned on two opposite sides of the machine;Standardly mounted on all Evo rebar bending machines, long saddles – with max. 10 holes – are indispensable to realize the double bending. Price Euro 3.660 Euro + VAT, negotiable, ExWorks Oradea, Romania. Please make an offer. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /

Condition: new, Panel saw ALTENDORF F 25, Type 6 -Exhibition machine- Double roller carriage, swiveling, manual height and swivel adjustment, parallel fence with manual fine adjustment, angle/miter fence, Hnedpfxsu R S Hcj Akreu prepared for subsequent installation of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, cutting width: 1,000 mm, cutting height: 100 mm, max. saw blade diameter: 315 mm, max. saw blade overhang: 104 mm, Non-CE version: max. saw blade diameter: 350 mm, max. saw blade overhang: 121.5 mm, rip fence extendable up to: 3,450 mm, speeds: 4,200 rpm, motor power: 4.0 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: new, Finger-setting machine with a segmented top clamp PNEUMATIC CYLINDER!!! Max. setting capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. setting angle ----- 0 - 135 degrees Weight ----- 430 kg Width ----- 1820 mm Hsdpfxjga T Dlo Akrjnu Depth ----- 850 mm Height ----- 1175 mm

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20.0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions Hnodpfx Aksxabkbsrou - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: new, 40 mm 8,5 U/min 120 mm roll diameter 152 / 162 mm engine output 1,1 kW connected load 400/50 V/Hz hydraulic pump 1,1 kW 80 kN range L-W-H 900 x 600 x 1000 mm weight 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function Hjdpfxoy H N H Ho Akrenu - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles

Condition: new, square edge steel 20x20 / 25x25 mm flat steel 100 x 7.0 mm round bar steel 22.0 / 27.0 mm L-beam 100 x 10 mm weight of the machine ca. 33.0 kg. range L-W-H 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance "cold" : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm Hnjdpfxsxcuyho Akrju - - - - - Bending capacity "hot" : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with eccentric clamp - Material stop

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, input voltage: 380 V, Tube forming machine Brand: BLM Model: TUBE-FORM Year: 2007 Serial number: 415050200004 Weight: 2700kg Power: 12KVA Hnjdpox Tt H Rjfx Akrsu Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min Hodpexabntefx Akrenu oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 8900 € 171.77 € 20 to 185 mm 200 x 12 mm 480 x 1060 mm 200 mm 80 mm 10 mm/s 10 mm/s 2.2 kW 930 mm Hsdpfxowiqt Tj Akrsnu 1150 mm 480 mm 1200 mm 530 kg Programmable stroke and retraction point Adjustable speed and pressure Manual jog operation and automatic operating mode Holding pins and tools hardened and ground 3 holder pins Bending tool Manual stop 400 mm Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: new, sheet width 1250 mm plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Hnedpfexaacvex Akrsu Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm Hnedpfx Aoxcuiiskrou max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST Hedpfx Aksxaac Neronu pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"