Rolls bending machine - 3 Rolls

DAVI MCO 2020

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Dkjdpfszbqquex Ai Seu Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology Dkjdor Axxzopfx Ai Seu EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Dodpfx Asrl Ra Hji Sjku Length - 14 m Width - 3.6 m Drying capacity - 10t/h

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Technical Data: - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports Dsdpfjip Niksx Ai Ssku - Two-hand control panel

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C synchronous dual drive AC motor, 380 V, 750 W Dkjdpfx Asifgu Uei Seu with hand and foot remote control, complete set

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine Dedpfoynbmmsx Ai Seku scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Dkodpfowp Nv Hsx Ai Ssu Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Year of construction: 1997, condition: ready for operation (used), Travel X/Y/Z: 1300mm/1100mm/1000mm, table dimensions X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Speed: 7000rpm, spindle power: 50hp, tool magazine: 80, dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. On-site inspection is possible. Dkodpfstx Dn Usx Ai Seu

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Dedpjxapftsfx Ai Sjku Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW Djdpsv Tpxqsfx Ai Soku -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg