Used Exfo Ftb-4Pro-S1-128G for sale (5,074)

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure Iodpfxozu Aibj Acfsba - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, Year of construction: 1988, Slot drilling machine Manufacturer: SCM Type: AS 16 Iodpfxozuynue Acfsba Year of manufacture: approx. 1988

Condition: used, Year of construction: 2016, CNC machining center Ibodpfx Acszux Rbofja Manufacturer: Format4 Type: Profit H500S 16.56 Year of manufacture: 2016 Technical data Working area: X = 5540 mm Y = 1570 mm Z = 350 mm 5-axis main spindle Drilling head 12 vertical drilling spindles, 32 mm pitch 6 horizontal drilling spindles, 32 mm pitch, 4 in the X-axis and 2 in the Y-axis Dado head unit arranged in the X-axis Motor controlled via inverter up to 7,500 RPM 1 Becker vacuum pump 2 tool changers

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer Ibedpfx Ajzuw H Iscfsa - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle Isdpfx Aszuw E Rjcfsba - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: like new (used), Year of construction: 2020, operating hours: 5 h, functionality: fully functional, machine/vehicle number: A1111D0330, overall weight: 9,100 kg, A new trupunch 1000, never use. Ijdpfszhid Eex Acfsba

Condition: ready for operation (used), functionality: fully functional, GENIE GS-1930 Electric Scissor Lift, Aerial Work Platform Designation: Genie / GS-1930 Load capacity in kg: 227 Rated lift in mm: 5790 Platform with extension in mm: 2540 Platform retracted in mm: 1750 Maximum platform height in mm: 5790 Free lift in mm: 0 Iedezux Uyspfx Acfeba Drive type: Electric Mast: Scissor

Year of construction: 2011, operating hours: 15,000 h, condition: used, overall weight: 18,000 kg, construction height: 3,650 mm, product width (max.): 2,520 mm, machine/vehicle number: 366931, enginetype: Diesel, manufacturer: Mercedes-Benz Ibedpozt Uiksfx Acfsa

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Crosscut and Mitre Circular Saws Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Saw blade diameter: 350 mm Ibjdjymqkljpfx Acfja Extraction port: 100 mm Weight: 100 kg

Condition: used, Year of construction: 2019, functionality: fully functional, KUPER FWS 1250 Veneer splicing machine for sale! Currently in production, available in January 2027. For joining veneers approximately 0.3–3.0 mm thick. The machine applies a special glue thread in a zigzag pattern, providing strong and tight joints even with wavy veneers. During pressing, the glue thread is embedded into the veneer, eliminating the need for additional sanding. Technical data: Throat depth: 1250 mm Feed speeds: 15 / 30 / 45 / 60 m/min Ijdpfozu Auqex Acfsba Veneer thickness: 0.3–3.0 mm Voltage: 400 V, 50 Hz, 3-phase Compressed air connection: R 1/4" Air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA

Condition: used, functionality: fully functional, mileage: 7,30,809 km, power: 350 kW (475.87 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 12,865 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, tire condition: 40 %, axle configuration: 4x2, wheelbase: 4,800 mm, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: semi-automatic, suspension: air, number of seats: 2, total length: 8,900 mm, total width: 2,520 mm, total height: 3,650 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 5,200 mm, loading space width: 2,460 mm, Equipment: ABS, air conditioning, crane, cruise control, parking heater, power assisted steering, Mercedes Benz 1848 with Atlas 240.2E-A4 crane, truck with open box/flatbed, first registration 12/2011, mileage 730,809 km according to odometer, 350 kW / 476 hp, 12-speed automatic transmission, driver's cabin with 2 seats, tire size 315/70 R 22.5, tread depth 5-11 mm, total weight 18,000 kg, unladen weight 12,850 kg, axle load front 9,000 kg, rear 11,500 kg, ABS, radio, differential lock, power steering, wheel chocks, engine brake, heated seats, fully air-suspended, auxiliary heater, air conditioning, dimensions length x width x height 8900 x 2520 x 3650 mm, crane Atlas 240.2E-A4, with remote control, 12.3 m, 1560 kg, 4.5 m, 4780 kg, 4-point support, width 7700 x 4300 mm, flatbed dimensions 5200 x 2460 x 800 mm, aluminum side walls, drawbar coupling, tire chains, further details and more pictures available upon request, this description does not constitute a binding offer and may contain errors, no guarantee on all information. Ibodszt Saaspfx Acfea

Condition: used, sheet width 1250 mm plate thickness 12 mm Ibsdozu A Uwepfx Acfoa distance between columns 1250 mm total power requirement 16 kW weight of the machine ca. 2,7 t

Condition: ready for operation (used), WEISS 168928B-002 spindle, used, with normal signs of wear, 100% functional, delivery contents as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Ibodpozu Huuefx Acfsa

Condition: new, Siemens Teleperm M 6DS1700-8BA E1 with C79458-L442-B5, unused, 100% functional, in opened original packaging Iedjzu E H Nepfx Acfoba

Condition: ready for operation (used), Siemens Teleperm M 6DS1837-8EA Ram memory module E Stand 2 SN CO960610 used 100% functional Iodozu E Iyjpfx Acfjba

Condition: new, Siemens Teleperm M 6DS1000-8AA power supply output 17 > unused < in opened original packaging, 100% functional Ibjdjzu E E Espfx Acfea

Condition: ready for operation (used), KUKA 1FK7083-5AF81-1YY3-Z S16 servo motor, serial number: YFW250680831008, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ibjdpfxozu Empe Acfja

Condition: ready for operation (used), Siemens EWK-SUS1146011 Software SUS WinCC Comfort / Advanced SN: SVPB81034215, used, in good condition, 100% fully functional, delivery scope as per photos. Ibsdpfxezu Euao Acfea

Condition: new, Siemens Teleperm M 6DS1144-8AA E2 with C79458-L436-B540, unused, 100% functional, in opened original packaging Iodpfx Aszu E Hijcfoba

Condition: ready for operation (used), Siemens Teleperm M 6DS1400-8BA controller module E Stand 1 SN B2043498 used 100% functional Iedpfx Aszu E Hvecfsba

Condition: ready for operation (used), Siemens Teleperm M 6DS1731-8RR Board E Stand 7 SN LN100477088 used, 100% functional Isdozu E Itopfx Acfjba

Condition: ready for operation (used), , used, slight signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ibsdpfx Aezu Huhscfsa

Condition: new, WEISS 174282-014 spindle, dimensions see acceptance protocol, unused in opened original packaging, 100% functional, scope of delivery as per photos Ibodpfszu Huzsx Acfsa

Condition: new, Siemens Teleperm M 6DS1702-8AA E10 with C79458-L442-B1 E34-36, unused, in original packaging Ibedpfx Aszu E Igecfea

Condition: ready for operation (used), KUKA 1FK7083-5AF81-1YY3-Z S16 servo motor, serial number: YFU150407861021, used, in good condition, 100% functional, scope of delivery as shown in the photos. Isdpezu Emcjfx Acfsba