Veneer splicing machine

Kuper FWS 1250

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Isdoxdxccopfx Alxjif Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Iiodpfx Alog A D Ansxsf Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Iiodpfx Alet Akcfexof Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Ijdpfx Ajyayumelxjif Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Isdsv Igtbepfx Alxeif Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: excellent (used), functionality: fully functional, working width: 1,400 mm, plate length: 3,500 mm, stroke length: 450 mm, Automatic Hydraulic Pressing Line with Heated Platens – Excellent Condition We offer a complete industrial pressing line with a fully automatic continuous cycle (loading – pressing – unloading and stacking), ideal for the production of 2- and 3-layer parquet, veneering, engineered flooring, and other wood-based applications. Technical Specifications: Iijdpswiw Uqsfx Alxef Work platen dimensions: 3500 x 1400 mm Heavy-duty drilled solid steel platens Opening stroke: 450 mm Heating system: diathermic oil boiler (capacity: 200 liters) 6 large-diameter pistons – top-down pressing Platen height from floor: 800 mm Platen closing time: 1–2 seconds Opening/closing cycle time: 2–3 seconds Working pressure: 10 kg/cm² Installed power: 10 kW Automatic loading conveyor Unloading roller conveyors Robust frame made of seamless steel sheets Independent electrical control panel The machine is in excellent working condition. Its heavy-duty construction ensures reliability and durability in demanding industrial environments. Price: negotiable Feel free to contact us for more information, photos, or to schedule a machine inspection

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Ijdpfxsxgqmxs Alxeif Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: excellent (used), Veneer splicing machine Model : KUPER FWJ 920 Iisdpfx Aletq Ey Tsxof In very good condition.

Condition: good (used), functionality: fully functional, cutting length: 2800 mm Iiedpfxew D Nq He Alxef rear guide

Condition: ready for operation (used), Kuper FWJ900 Iiodpfx Aevrk Sijlxsf With glue thread, well-maintained condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Stand model, feed speed 7 mm, Projection 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm