Used Heidelberg Printmaster Pm 74-2 P for sale (95,282)

Condition: used, Year of construction: 1999, Format: 370 x 520 mm Equipment: Two colours Straight machine Alcolor Automatic film dampening Autoplate: semi-automatic plate change system Cptronic , Chromed cylinders Hnedpfx Absyf Iicshjp Blankets wash-up device - Wash device for impressi Ink-rollers wash device managed from console Powder spray, Cooling unit Plusversion All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed plate bender

Year of construction: 1988, condition: good (used), Bucket sealer Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket Hedpfxoigyp Hj Abhenp automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Condition: new, empty load weight: 190 kg, maximum load weight: 560 kg, overall weight: 750 kg, loading space length: 2,641 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, 2-axle car trailer Garden Trailer 264/2 with accessories We offer you the largest lightweight car trailer with a transport area of 264 x 125 cm, with which you can transport loads with a very large volume. The Garden Trailer 264 model is a trailer that will make all your transportation tasks easier. Do you want to transport a large amount of wood? No problem! New household appliances, electronics or furniture? Nothing could be easier! You can transport everything you need yourself, and loading and unloading is made easier by an inclined drawbar. Car trailer Unitrailer Garden Trailer 264/2 KIPP - Advantages and technical data A very wide transport area that facilitates the transportation of bulky goods Complete zinc protection against corrosion Hnedpfx Abst Iblbehep Above-average durability thanks to additional support beams under the floor and frame reinforcements Active marker lights make it easier to read the trailer position when reversing Highly durable, corrosion-resistant plastic mudguards Rear lighting protected from damage the option of placing the trailer on its back, which means it takes up very little space during storage Wheels attached to the sides of the transport area ensure a lower center of gravity, better handling and no bouncing of the trailer even when driving unloaded

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor and a vertical 200-liter compressed air tank with fittings. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee reliable and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Hodpfx Abeyguirohenp Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 100 kg 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Hnjdpfx Ajyguq Ajbhjp Refrigerant type and quantity: R134a, 400 g 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Package for Demanding Applications – ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT screw compressor with dryer Horizontal compressed air tank – 270 L Key Features of the Energy Saver Series 1. Permanent Magnet (PM) Motor Technology Most compressors in the Energy Saver series use permanent magnet motors. Compared to standard induction motors, they: Achieve efficiency levels of IE4 or even IE5 Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range) Are smaller, lighter, and generate less heat Hnodpfeycg I Ssx Abhop 2. Advanced VSD Inverter Control The heart of the Energy Saver line is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate on an "all-or-nothing" principle (load/unload). If your system requires only 30% capacity, the compressor reduces speed, consuming proportionally less energy. Eliminates idle running: Traditional compressors often run for several minutes after the tank is full, consuming about 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges during startup, which: Saves the electrical installation in the facility Allows frequent start/stop cycles without overheating the windings 4. Real Energy Savings In practice, the Energy Saver series can reduce electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable pressure in the network (with accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: No sudden pressure and temperature spikes prolong the screw stage life. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Air delivery at 0–6 bar: avg. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 1495 × 520 × 1340 mm Weight: 250 kg

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Hnodpsyic Tuefx Abhep Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Condition: used, Electric motor, E-motor VEM Three-phase motor, heavy current motor Model: IE3-W41R 250M 2 LL TPM HW Mounting: B3 Frame size: 250M Motor power: 55 kW Motor speed: 2970 rpm Current draw: 92 amps Mains connection: 400 volts, 50 Hz Hnjdpfx Asxuk Iljbhsp Shaft diameter: Ø 60 mm Shaft journal length: 155 mm Keyway width in shaft: 18 mm - Foot-mounted motor with 4 mounting holes Ø 24 mm, hole spacing 400 x 350 mm Motor housing length without shaft: 780 mm Motor housing length with shaft: 930 mm Space requirement L x W x H: 730 x 400 x 520 mm Net weight: 510 kg Good condition

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Motor power: 1,1 + 1,5kw Table tilt (Motorized): Tilt speed 0.67 rpm Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Hjdpfx Aouf Nm Hebhonp Drive: Danfoss Electrical components: Schneider

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Hnsdpfx Asykr Rzebhjp

Condition: not inspected (used), functionality: unexamined, Special price: The pad printing machine of the PM-268 ES series stands out with its user-friendly operation and precise mechanics. It delivers outstanding print results – from single-color to multicolor printing. Clear display Hjdpfx Abey Apptshonp _ Printing pressure adjustable via magnetic setting Specifications Number of colors: 1 Maximum print area: 110 mm × 160 mm Maximum print diameter: ⌀50 mm Print plate dimensions: 100 mm × 150 mm Weight: approx. 100 kg

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Hnedpfxovuz N Re Abhjp Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: excellent (used), mileage: 3,57,918 km, power: 368 kW (500.34 HP), first registration: 11/2017, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: crane, retarder, = Additional options and accessories = - Intarder - PTO - Tipping hydraulics = Remarks = WMA06XZZ6HM749787 = More information = Number of cylinders: 6 Engine capacity: 12.419 cc Empty weight: 11.627 kg Crane: PM SERIE 32.5 PX, year of manufacture 2017, behind the cab Make of bodywork: PM SERIE 32.5 PX Technical condition: very good Visual appearance: very good Registration number: ER793XM = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Hjdpeymp Hljfx Abhsnp When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Hjdpfemw Ui Rex Abhjnp Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: ready for operation (used), Year of construction: 1997, 8-Farb-Bogen-Offset 8-col.sheet-fed offset presses Built in 1997 Size max 520 x 740 mm min 210 x 280 mm Image area max 510 x 740 mm Speed max 15.000 c/h Pile height feeder 945 mm Hnedeygwbdopfx Abhsp Pile height delivery 1.000 mm

Condition: like new (used), Year of construction: 2008, Suprasetter A75, 4up Hnedpfxjyw N Tbe Abhop Manufactured: 11/2008 2 laser heads, GEN II 2400 dpi, up to 22 plates/hour Bacher Punch Min plate size: 240 x 240 mm Max plate size: 676 x 760 mm With Prinect 7.51 Installed on DELL PC With Stacker Advant 36 Also available with SCL

Condition: ready for operation (used), Year of construction: 2014, A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible. Hsdoytgn Topfx Abhonp

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Hedpfx Absvmywqjhonp Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Weight: Estimated: Kg200.0 Dimensions: 1100mm X 1100mm Hedpfjygvncox Abhjnp Equipped With: Fitted with 300 micron & 500 micron ball tray screens. Can also include spare 710micron ball tray screen.

Year of construction: 2024, condition: used, cutting width 180 mm Cutting height Ø140 mm Motor output 2,2 kW Cutting height at 45° Ø120 mm Dimensions (L/W/H) 700x950x1750 mm Hjdpfovnwfuox Abhonp machine weight ab. 180 kg

Condition: new, table length 1200 mm table width 800 mm Hsdpfx Aboh Dqb Sehenp 28 mm table height 450 - 800 mm 500 kg weight of the machine ca. 0,8 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement.

Condition: ready for operation (used), ABB Robotics, 2 x PS 60/4-50-P-LSS-3985 servo motor combination, serial numbers: 910.8090020-063 / 910.8090020-029, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Hnodpsi D Eycjfx Abhsp

Condition: used, Support grinding device, support grinder, support grinding device, circular grinding device, bench grinder, grinding machine, stand grinder, stand grinder, combination bench grinder Hodped N D Ddofx Abhjnp -Grinding device -Voltage: 380V -Drive: 1.6/1.15 kW -Speed: 2800/1400 rpm -Dimensions: 390/223/H240 mm -Weight: 20kg

Condition: used, Year of construction: 2015, Extendable superstructure: Yes Production country: DE Please contact Theo Lelie for more information Hnedpfjzl T Uiox Abhsp

Condition: good (used), Frampton ST-2-3-P conveyor grill Stainless, two tier conveyor oven, belt dimensions 2800mm x 450mm, variable speed, digital temp controls, 20Kw, mobile, 3Ph Hnedpfxenp Ncys Abhjp