Welding Table

WMT PM 1200 x 800

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift Hedov U A Izspfx Agwjni - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration system from the Glogar Technology Center, available immediately

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm Hsdpohzbipsfx Agwoni - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Hodpfxed Hy Ele Agweni Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. Hedpfoxcgy Hex Agwoni The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: new, functionality: fully functional, empty load weight: 1,300 kg, maximum load weight: 2,200 kg, overall weight: 3,500 kg, loading space length: 5,500 mm, loading space width: 2,270 mm, loading space height: 2,080 mm, PRODUCT INFORMATION "CHEVAL LIBERTE ROADSTAR C2000 3500KG 550X227X208CM CAR TRAILER BOX TRAILER" The C2000 car trailer box trailer from Cheval Liberte / Debon combines large volume, an attractive design, an aerodynamic front, aluminum sides, an aluminum floor, and a polyester roof. Hardly any other car box trailer has such excellent handling as this one! The box trailer is equipped with the Pullman2 chassis, a proprietary ChevalLiberte development. A low loading height of just 38 cm, independent suspension with trailing arms, coil springs, and automotive-standard shock absorbers ensure optimal handling. The flat loading angle is ideal for loading a car. A loading ramp with additional loading rails and a particularly low chassis allow for loading even low-lying vehicles. The extensive standard equipment on the car trailer includes a poly roof with a one-piece poly front, aluminum walls, aluminum floor, two side doors, two side flaps, an electric cable winch, perforated support rails and wheel stops at the front, a 100 km/h speed limiter, interior light, aluminum rims, a spare wheel with aluminum rim, an automatic jockey wheel, tie-down eyes, a sturdy frame, and a V-drawbar. Dimensions: Loading width approx.: 220 cm, loading height approx.: 189 cm, loading width between the fenders (narrowest point) approx.: 215 cm, height from the perforated rail to the sales hatch approx.: 18 cm, the curve at the front is approx. 50 cm deep, thus the straight interior length is approx. 500 cm. Interior length to the cable winch approx.: 520 cm. We offer affordable accessories for box trailers, such as motorcycle rockers, support rails, motorcycle straps, tie-down rails, tie-down straps, rear supports, and tie-down eyes. The body is splash-proof. ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs Hodswa Scdopfx Agwsni · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: excellent (used), Year of construction: 1980, WAFIOS DF5 Wire range- 1,5- 5,0 mm Mesh with - 20 - 100 mm Working with - max.2000mm Capacity - 170 m2 / hour Hodpov Uw Ddofx Agwjni Tooling for the mesh width - 60 mm

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Hedpfx Asd Hxx Aegwsni Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm 40 mm 2,2 kW Hjdpfx Agewp Tq Uswjni

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Hsdpfx Agsuxdhuswsni

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg Hnodpfx Ajn N Ekcjgwsi good condition