Used Maggi / Scm Line Drilling Machine for sale (70,111)

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm Nodpfxsq Ii Dlj Ahnolf max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2018, functionality: fully functional, - Year of manufacture: 2018 - Fully operational - Made in Poland - Operating manual, CE certificate included TECHNICAL SPECIFICATIONS: - Four drilling units - Suitable for drilling both long and short components - First drilling unit: five drills - Second drilling unit: five drills - Third drilling unit: five drills - Fourth drilling unit: six drills - Adjustable drilling units, right and left - Three horizontal pneumatic clamps - Three vertical pneumatic clamps - One centering pneumatic clamp - Motor rotation (right): 3000 rpm - Motor power: 5 kW - Spindle stroke: approx. 160 mm Nsdjw Iqdzjpfx Ahnelf - Table height – working level: approx. 1000–1080 mm - Rated voltage: 3x400 V - Air pressure: 6 bar - Air consumption: 10 Nm3/h / 2m3/h Dimensions: - Length: 2300 mm - Width: 1700 mm - Height: 1500 mm - Weight: 750 kg

Condition: ready for operation (used), Year of construction: 2013, Fritsch Easyline make up pastry line Nsdpszv R Emsfx Ahnslf year of build 2013 table length overall 573cm. conveyor belt width 65cm guillotine filling depositor cutting knives etc. pictures BEFORE cleaning

Condition: good (used), Manufacturer: MAS Type: VR 4 Reach: 1000mm Without table! Njdoh Eigbspfx Ahnslf

Condition: good (used), 12-head drilling machine for sale, Nlodpfxjpy D Dwe Ahnjf Table size: 400 x 360 mm

Condition: ready for operation (used), Year of construction: 2000, number of spindles 25 -1500 U/min Stufenlos bore capacity in steel (diameter) 23 mm bore stroke 120 mm table clamping surface: 1250 x 340 mm taper MK MK3 total power requirement 2 kW weight of the machine ca. 0,4 t Nedpfx Ahovr Hlronolf

Condition: good (used), Outreach: 915 mm Taper: MK3 Length: 1700 mm Nedpfxod Ixy Is Ahnslf Width: 1,000 mm Height: 2000 mm Weight: 1000 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Urban ESB 500 corner and scissor drilling unit with drill heads for Siegenia fittings Njdpfx Aheyza Dfenjlf

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Set for small parts Nlodsztazfepfx Ahnef Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: good (used), Drill grinding machine, drill grinding device, tool grinding machine, twist drill grinding machine, grinding machine, angle grinder, thread drill grinding machine, bench grinder -Manufacturer: Affilatrici, drill and tool grinding machine type 3M 4/60 Njdpszrfrtsfx Ahnjlf -Grinding wheels: installed Ø 180 mm, see photos -Motor power: 1.5 kW -Speed: 2800 rpm -Chuck: Ø 160 mm / Bore Ø 60 mm -Accessories: Centering MK1, 2, 4.5 -Coolant system: -Dimensions: 1080/945/H1300 mm -Weight: 370 kg

Condition: good (used), Year of construction: 2000, The upper drill head is missing. Working height: 1030 mm, Nedpfx Ahot Aifxjnolf Height: 1680 mm, Depth: 1800 mm, Width: 2450 mm

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 Nlodpfxozrd Sfe Ahnef No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: used, Year of construction: 1997, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Empty weight: 200 kg - Year: 1997 Nlodpfxjzry Nte Ahnsf - Documentation available: No - CE certificate present: No - Power [kW]: 1.1 - Table length [mm]: 290 - Table width [mm]: 290 - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 800 mm, total length: 1,250 mm, total height: 1,600 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Drive system: Conventional - Power [kW]: 0.55 - Table length [mm]: 290 - Table width [mm]: 225 - Min. spindle speed [rpm]: 320 - Max. spindle speed [rpm]: 1600 Nsdpfozry H Sjx Ahnslf - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 Nljdpfsy Ttrtjx Ahnof CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: new, functionality: fully functional, drilling depth: 55 mm, rotational speed (min.): 2,800 rpm, power: 3 kW (4.08 HP), table height: 875 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, High productivity for drilling furniture sides The MAGGI Boring System 46 is a semi-automatic multi-spindle drilling machine, equipped with two parallel vertical heads, each with 23 drilling spindles. It is the ideal solution for furniture manufacturers who frequently drill holes in the sides of cabinets, bookshelves, wardrobes, or shelving units. Thanks to the two drilling heads, the machine drills two parallel rows of holes in a single work cycle, significantly reducing production time compared to a machine with a single head. Manufacturer MAGGI – Italy Number of spindles 46 pieces Spindles left - right 11 left, 12 right Distance between spindles 32 mm Distance between outer spindles 145 – 625 mm Distance front unit-fence 15 – 494 mm Distance rear unit-fence 160 – 639 mm Maximum vertical drilling depth 55 mm Maximum drilling tool diameter (Ø) 40 mm Drill shank diameter (Ø) 10 mm Nljdpszp H Nzefx Ahnsf Hydraulic piston stroke 70 mm Maximum panel thickness 50 mm Maximum workpiece size 3000 x 700 mm Table height from the ground 875 mm Workpiece clamping pistons 6 pieces Number of motors 2 pieces Motor power 2 HP/ 1.5 kW Motor speed 2800 rpm Required air pressure 6-8 bar Air consumption 20 l/cycle Exhaust hood diameter (Ø) 80 mm Overall dimensions 1206 x 1180 x 1163 mm Net weight 366 kg Supply voltage 400 V – 3 Phase – 50 HZ

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification Parameter Value Model ZX7045B VARIO Max drilling capacity 45 mm Max face milling diameter 80 mm Max vertical milling diameter 32 mm Max tapping capacity M12 Spindle taper MT4 Spindle travel 130 mm Spindle speed 100 – 3200 rpm Speed control variable Max distance spindle–table 450 mm Distance spindle axis–column 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head tilting ±45° Nlsdpfxjyvh Hqo Ahnjf Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, actuation type: electric, rotational speed (max.): 1,700 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 630 mm, table length: 800 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, Special Offer – 5% Discount Available! Industrial Radial Drilling Machine The Industrial Radial Drilling Machine is a robust and reliable solution designed for precision hole machining in production plants, maintenance workshops, and metalworking facilities. Its rigid construction ensures excellent stability, high accuracy, and dependable performance, even during demanding industrial applications. The machine is suitable for a wide range of machining operations, including drilling, reaming, countersinking, boring, and tapping. The large working range and adjustable radial arm allow efficient machining of large and heavy workpieces without repositioning. Main Features * Rigid industrial construction * Wide spindle speed range * High drilling capacity * Suitable for drilling, reaming, boring, countersinking and tapping * Stable and precise operation * Easy machine operation * CE certified Technical Specifications * Maximum drilling capacity: 50 mm * Distance from spindle nose to table: 400–1580 mm * Distance from spindle axis to column: 370–2000 mm Njdpfeytf Thex Ahnslf * Spindle travel: 400 mm * Spindle taper: MT5 * Spindle speed: 25–1700 rpm * Number of spindle speeds: 16 * Column diameter: 350 mm * Main motor power: 4 kW * Table dimensions: 800 × 630 × 500 mm * Machine dimensions: 2500 × 1070 × 2840 mm * Machine weight: 3500 kg Applications * Drilling * Reaming * Countersinking * Boring * Tapping * Metal fabrication * Maintenance workshops * Manufacturing plants Delivery and Support The machine is supplied brand new and includes a 12-month warranty, warranty service, and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Nlodpfx Ahsvvi I Rsnsf

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Nledpfovvi Ausx Ahnef Storage location: Nattheim

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Njdjzu Szyepfx Ahnolf

Condition: excellent (used), functionality: fully functional, thickness planer SCM S 63 + surface planer SCM F52 + spindle moulder SCM T160 second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 L'Invincibile useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 L’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 net weigth kgs. 1000 surface planer model SCM F 52 L'Invincibile working width mm. 520 Nlodpfsvamvyjx Ahnof tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° motor power Hp 5,5 volt. 380/50

Condition: excellent (used), IM Very good condition. Nlodpjzkvh Nefx Ahnof

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a column drill press made by Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional The machine can be inspected and tested at any time! Nlsdpfx Ahozvrt Sjnjf If interested, two identical machines are available! Shipping costs via freight carrier: approx. €190 Phone number: 01575 2236716 You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, RADIAL CSEPEL TYPE: RF50/1600 TYPE: RF50/1250 20 AVAILABLE PIECES Nlsdpforiu Eysx Ahnjf